Latest ms fastener Tenders | Government ms fastener Tenders

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

Central Government/Public Sector

CTN :45474537

16 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap loco parts consist of damper, axle box housing, spheri block, gear casing, side buffer, cow catcher, yoke pin, bushes , liner, modified link, spring holder were plate, axle guide, torque arm, sand box, iron pipe, rubber bush assly, plant for ¿ blower, sand holding bracket, coil spring, knuckle, clevis, clevis pin, screw coupling, lock, double rotary, knuckle pin, equalizer beam, compensating beam, link, short beam, long beam, sand ejector, dowel plate and ci and other attachments. location- a by 2

State Government

CTN :45464764

12 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of various ms fasteners at cstps, chandrapur. - fastnrs, ms metric full thread, hex nut ms metric, washer ms metric, fstnr brass hex bolt, hex bolt ms metric full thread

State Government

CTN :45418507

15 Jun, 2026 12.30 Lacs

Umaria - Madhya Pradesh

Tender For procurement of v belts and ms fasteners for, unit no. 1 to 5 at sgtps, mppgcl, birsinghpur.

State Government

CTN :45413151

05 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of various ms fasteners at cstps, chandrapur.- hex bolt ms metric full thread m 10 x 55 and fasteners

CTN :45388326

19 Jun, 2026 NA

Netanar - Chhattisgarh

Tender For supply of mechanical ap items ms fasteners

Central Government/Public Sector

CTN :45355711

05 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap loco parts consist of side buffer, cow catcher, yoke pin, cbc shunk, knuckle, clevis, clevis pin, screw coupling, lock, double rotary, knuckle pin, equalizer beam, compensating beam, link, short beam, long beam, sand ejector, dowel plate and ci and other attachments. note:- the purchaser should see the lot personally before bidding. no claim will be entertained after the sale of lot location- b by 1

Central Government / Public Sector

CTN :45307005

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - c.i. scrap of axle pullies - 98080106(15) cond.& u/s c i scrap of axle pullies & alternator pullies of sort and sizes with or without ms fasteners in full or broken condition. note: 1)delivery on actual weighment basis.2) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 3) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 4) railways does not guarantee for quality, quantity description etc.. hsn code:72041000:gst@18% on forward charge basis. location: ferrous yard, bin no: e-5.

CTN :44782979

25 May, 2026 4.51 Lacs

Bardhaman - West Bengal

Tender For bid to ras corrigendum : tender for supply of ms fasteners d d - bolt nut ms is1363 c2 c23 6 blk mc m5x25mm , bolt nut ms is 1363 4 6 mc m6x40mm , bolt nut ms is 1363 4 6 mc m8x50mm , bolt nut ms is 1363 4 6 mc m10x50mm , bolt nut ms is 1363 4 6 mc m10x60mm , washer punch a ms m10 3 8 , bolt nut ms is 1363 4 6 mc m12x50mm , bolt nut ms is 1363 4 6 mc m12x75mm , bolt nut ms is1363 4 6 blk mc m12x90mm , washer punch a ms m12 , bolt nut ms is 1363 4 6 mc m16x40 , bolt nut ms is 1363 4 6 mc m16x50 , bolt nut ms is 1363 4 6 mc m16x65 , bolt nut ms is 1364 p c 4 6 mc m16x70 , bolt nut ms is 1363 4 6 mc m16x75 , bolt nut ms is 1363 4 6 mc m16x80 , bolt nut ms is 1363 4 6 mc m16x100 , bolt nut ms is1363 4 6 blk mc m16x165 , bolt nut ms is 1363 4 6 mc m16x180 , washer punch a ms m16 , bolt nut ms is 1363 4 6 mc m18x50 , bolt nut ms is 1363 4 6 mc m20x50 , bolt nut ms is 1363 4 6 mc m20x60 , bolt nut ms is 1363 4 6 mc m20x80 , bolt nut ms is 1363 4 6 mc m20x100 , bolt nut ms is 1363 4 6 mc m20x130 , washer punch a ms 20mm , 250nb coupler bolt nut

Central Government/Public Sector

CTN :45235162

26 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap condemn ferrous mixed melting consisting of and released from, switch blcp, zpt, bldj, blho, ztel, zban, zfwa, zlfr, zlda, zlc, zli, zprd, blpr, hog coupler, fl dom, marker light, dial gauge,diffrent type of measuring tools, electrical and machanical tools, bench type, accesories of dga, analytical balance, yoke, amonia printing machine, table, pinion, lifting tackle assly, magger, steel channel, lipid racer, plain racer, axle box crown and rear cover, lock plate, abutment ring, housing for traction bar, battery stand, set of lybrinth, end frame, holder plate, bello plate, nut, washer, speed prove housing cover, gear, set of hardware, racer, set of safety sealing, bench vice, set of bolt, longi set, brake shoe key, fly catcher fittings, lt distribution panel board, starter, mdb box, tube light assly, lt panel, diffrent typr of stand, box, top, etc, solar geasure sheet, exhaust frame, sign board frame, dg filter silencer, a9, sa9, c2 relay valve, c2w valve, air drayer valve, nut bolt, pbu/tbu unit, pentopen strip, main spring, longitude tube, upper articulation assly, push rode, study link, study tube, arm assly, pento base frame, servomotor, hardware and compresure crankshaft, free end cover, ply and cover cylinder, intercooler, head, base frame, coupling filter, disk valve, ms pipe, crake end shield, bearing, release ferrous items during overhauling, loco filter jali, drums, iron sheet, rdpt kits, small box racks and structure, packing cage cab fan coverage jali, dust cover, oil filtration plant release item, oil machine release item, heater coil heater element, test bench, pit wheel lathe machine release items, fuse oil seal, filter contactors switch, lamp pipe, roller filter, disc, gaskets, main drive roller shaft, light junk box cover, loco coridor cover, water protection cover, ms angle, wire rope, slings bracket fan and air circulation fan jali and blades, spm, iron spring, ms washer, screw, liner, car body filters, ms thin sheets, ms spring, cutter pin channel, shutter, hose pipe wires, ms angle, structures, blower fan jali, filters, window shutter, flasher light, dome cooler body without motor & pump, diffrent type of resistance, grid panto strip, diffrent type of ferrous release from charger, regulator, cvt, repeater frame, steel rack, ups, transformer, sensor gear, bearing cover, locking plate, special rig, distance piece bearing, middle wheel lock plate, thrower, lock plate, loose rip, racer distance piece, spring seat liner, push pull rod, spheriblock, damper, cattle guard, cbc coupler body, yoke, buffer, screw coupling, draft gear, nuckle, clevis, yoke pin, nuckle pin, clevis pin, hand brake, bello plate, brake shoe key, cbc spare parts, operating handle, ferrous released from master controller, c145 contactor, em-contactor, c118 contactor, program switch, etc.

Ms Fastener Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors