Latest ms flanges Tenders | Government ms flanges Tenders

Central Government And Public Sector

CTN :41797260

03 Oct, 2025 NA

Chittorgarh - Rajasthan

Tender For tender for supply of ird mechanalysis turbovisory instruments : : - make- ird mechanalysis limited ird544m-vibration sensor , inductive velocity , top exit , mil 2-pin connector , 42.52mv/mm/s , 10hz-1khz sku - m97120 , make- ird mechanalysis limited stud for vibration sensor item no 1 , mounting/grub screws , 1/4 inch-28unf male , m6x1male sku-stud-m6 provides connection between vibration sensor and mounting pad , m/s ird mechanalysis limited vibration sensor mounting pad mild steel blackodized for ird544m (60x60x16 mm) with m6 thread for item no 1 tapped sku - ms-pad-ird544m , make- m/s ird mechanalysis limited vibration sensor cable assembly for item no 1 , signal cable teflon 3.5mm dia , ss conduit 5mm id , 15 meter length straight , 2 pin ms , shielded , spade lugs at free end sku-m601015spade lugs at free end carry following colour code- red core-signal live black core signal ground green core- signal shield , make- ird mechanalysis limited eddy current pickup set comprising of probe , driver and connecting cable for 9 meter system. constituents.. 1) eddy current pickup , 8 mm tip dia , m10x1 thread. 60 mm long 2) eddy current pickup extension cable , 8 meters length , suitable connectors at both ends for connection to probe as well as driver 3) eddy current probe driver , -24v supply. these will with ird mechanalysis branding , make- m/s ird mechanalysis limited ird8800 rack , 8 position , 5u sku-m88008 this is the bin and will accomodate ird8800 cards , make-ird mechanalysis limited ird8800 (8800) , m88250 (88250) casing vibration module , 2ch velometer input (mv /mm/sec) and 1ch key phasor input , api standard 670 compliant sku-m88250-dc ird8800 series module m88250 can work with all types of velocity output vibration sensors that provide mv/mm/sec output - like ird531 (4 mv/mm/sec) and ird544m (42.52 mv/mm /sec) , make- m/s ird mechanalysis limited ird8800 (8800) , m88900 (88900) - speed module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc sku-m88900-dc input- accelerometer and/or velometer outputs-4-20 ma dc output proportional to full scale vibration , technical specification attached in pdf , make- ird mechanalysis limited ird8800 (8800) , m88600 (88600) - eccentricity module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 vdc sku-m88600-dc input- accelerometer and/or velometer outputs-4-20 ma dc output proportional to full scale vibration , technical specification attached in pdf , make- ird mechanalysis limited 35 mm din rail mount industrial grade power supply , 480 w , product- rps480 , 24 v dc output , technical specification attached in pdf , make- ird mechanalysis limited cabinet 1500 x 600 x 600 in mm , ip32 sku - cabinet-1500-600-600-ip32 , installation , commissioning and calibration check of all supply sensor with unit at site .

CTN :41810332

23 Sep, 2025 36.00 Lacs

Jaipur - Rajasthan

Tender For supply of spare parts for corporations truck mounted road sweeper machines - side brush, central brush, transperent pvc, sponge rubber, rubber suction hose, rubber for suction nozzle, solid tyre, v belt spb 89, 8mm rubber sheet, rubber pad, fuse 10 amp, fuse 20 amp, hydraulic oil per liters, suction strainer, compressor oil elgi per liters, strainer, filter bsp, plastic spray nozzle, pu pipe, pu joint, pu tee, dowty seal, air filter of compressor, suction tank rubber packing, centre brush wheel bearing, blower shaft bearing, suction hose pipe black (centre brush box to suction tank), hydrulic cyclinder seal kit, air cyclinder assembly near side brush, centre brush wheel stand complete, hydrulic reliave valve, solonite valve, fan belt set (3 no s), hydrulic motor, hydrulic pump, blower shaft ms, blower shaft pulley (2 no s), hydrulic pipe 3/8 5 ft. length, hydrulic pipe 1/4 5 ft. length, hydrulic pipe 1 5 ft. length, 1. all taxes (gst) are to be included in bidding rates. 2. l-1 will be decided on lowest sum of s. no. 1 to 40.

CTN :41757436

20 Sep, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of ac filter , carburetor bs29 , cable assy clutch control speedometer , retainer oil seal , pad set disc brake , speed sensor , speedometer assy , element oil filter , chain and sprocket kit , assy oil filter , coolant pipe hose , clamp , wiper blade , bulb head light , assy wiper blade , flasher 12v , head lamp bulb 12v , assy combination switch , solenoid , field coil assy , armature assy , brush carrier assy , relay 24v , relay solid state , bulb fog lamp , wiper blade rear 330 ms bcs , wiper balde front 600 driver m s , projector bulb , relay assy , switch stop lamp , bulb 12h7 55w head lamp , motor assy starting , self starter for tata storme , self starter for stln

CTN :41759242

19 Sep, 2025 NA

Parganas - West Bengal

Tender For supply of ord head d d - cylinder liner , piston 3rv , piston ring set , push rod tube sub assy , rubber bush bottom , avm pad rubber ms plate , nozzle assy , pump element , v belt , connection fuel complete pipe injector , filter air complete , insert pre filter , insert micro super filter , oil filter body , gasket cyl head , rubber coupling diaphram , switch solenoid

Central Government/Public Sector

CTN :41801414

06 Oct, 2025 NA

Abu Road - Rajasthan

Tender For supply of set of 3 items1) ms rectangular plate of size 50 x 30 x 3 mm with 2 holes of dia 10 mm to emd part no.40015798/dlw part no.19394548 = 01 no. (2) hts hex. head bolt of size 3/8-16 x 7/8 with spring washers to emd part no.180121/dlw part no.19012494 = 02 nos. (3) pad tapping to emd part no.40016594/dlw partno.17087272 = 01 no. (all the above items should be tin plated)

CTN :41628830

12 Sep, 2025 12.00 Lacs

Firozpur - Punjab

Tender For corrigendum : supply of toilet seat covers (v2) (q4) , soap dish - case (q4) , connection pipe with nuts (v2) (q3) , pvc waste pipe 50mm isi marked , cabinet mirror pvc size 450x600 mm isi marked , waste coupling pvc 32 mm isi marked , pvc handle with rod for low level flushing cistern isi marked , tiolet paper holder isi marked , ball pvc for 15 mm float valve isi marked , ss sink coupling 4 inch , wall mixer brass leg 15 mm , mortise door lock and handle set 200mm oblique 8 inch , plywood 6 mm thick of size 4 feet x 8 feet bwp isi marked , plywood 12 mm thick of size 6 feet 6 inch x 3 feet bwp isi marked , plywood bwp 8 feet x 4 feet x 4 mm isi marked , prelaminated particle board eg size 8 feet x 4 feet x 18 mm isi marked , prelaminated particle board eg size 8 feet x 4 feet x 12 mm isi marked , teak wood beading 20x4mm comma 6 feet long , teak wood beading 25x4 mm comma 6 feet long , teak wood beading 1 point 5 inch x4mm comma 6 feet long , soft wood scantling 3 inch x4 inch , wire mesh beading size 15x12mm , hardwood beading for cupboard size 20x6mm , pvc seat and back for chair varandah map , pvc seat for chair dining map , cushion with cover for sofa set 100 mmthick 40 density foam cushion size 21x22x4 inch tapsestry cloth rate not less than 120 oblique mtr isi marked , cushion for dressing stool size 350mm x 350mm x 3 inch , stainless steel wire mesh 4 feet wide 15 mtr long isi marked , stainless steel wire mesh 3 point 5 feet wide 15 mtr long isi marked , glass panes clear sheet 1200x 900mm x 5 mm isi marked , glass panes clear sheet 1200x 900mm x 8 mm isi marked , glass panes clear sheet 1200x 900x 4mm isi marked , aluminium plain sheet 22 gauge 4 feet wide isi marked , ss curtain rod 20 mm dia isi marked , bracket cp for curtain rod 20mm isi marked , pad lock with brass 7 levers comma 65mm comma 4 keys isi marked , aluminum anodise hydrolic door ) /bid number : gem/2025/b/6617053 * /dated: 28-08-2025 & & / bid document 1 / 50 closure regulated desination number 02 weight between 36 to 60 kg isi marked , aluminium anodised slidding bolt 250mm with stapple complete isi marked , aluminium tower bolt 200mm with stapple isi marked , aluminium tower bolt 150mm with stapple isi marked , aluminium tower bolt 100mm with stapple isi marked , aluminium door stopper double leg isi marked , aluminium door stopper single leg isi marked , aluminium bow oblique door handle 125mm isi marked , aluminium bow oblique door handle 100 mm isi marked , helical door spring closer ms 150 mm isi marked , hinges butt alumn pressed 100 mm isi marked , hinges butt alumn pressed 75 mm isi marked , ptmt handle 125 mm isi marked , ptmt tower bolt 200mm isi marked , ptmt hinges 100mm isi marked , paint smoke grey in 1 ltr container isi mark , paint white in 1 ltr container isi mark , paint black in 1 ltr container isi mark , touch wood isi marked , french polish in 1 ltr container isi marked , polish melamine in one ltr container isi marked , thinner isi marked , tarpentine oil isi marked , fevicol sh isi marked , m seal isi marked , wall putty isi marked , magnetic catcher , bottle trap pvc 32 mm , one piece syphon kit 8 inch , multi trap pvc 110mm , washhand basin bracket l type , paint brush 1 inch isi marked , paint brush 1 point 5 inch isi marked , paint brush 2 inch isi marked , pvc socket 75mm isi marked , pvc bend 110mm isi marked , pvc bend 75mm isi marked , pvc waste pipe 32 mm isi marked , pvc board size 8x4 feet x 12mm , pvc board size 8x4 feet x 18mm , pvc socket 110mm isi marked , stainless steel screw full thread 35 mm isi marked 50 nos , stainless steel screw full thread 25mm isi marked 50 nos , ms wood screw 50 mm isi marked 50 nos , screw black cross 1 inch isi marked 50 nos

CTN :41770192

15 Sep, 2025 NA

Kangra - Himachal Pradesh

Tender For restoration of rain damages to various lwss under section daulatpur in tehsil and district kangra (hp). (sh) repair and maintenance of pumping machinery including electrical part, rubber sheet, nuts and bolts, pvc tapes and ms flanges etc.

State Government

CTN :41365007

15 Sep, 2025 NA

Phaltan - Maharashtra

Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te

Central Government/Public Sector

CTN :41488074

16 Sep, 2025 70.5 Thousand

Jhunjhunu - Rajasthan

Tender For corrigendum : supply of plain glasses for welding screen , m-seal c j compound n type. , measuring tape made of steel 3 mtr , holder for welding electrode 600amp , pipe wrench adjustable as per is.no-4003-1978 , steel pad lock 7 levers 50 mm with two key , double end ring spanner chrom vanadium steel chrom plated , jublee clamp for cutting hose , plier combination insulated 8.inchby200 mm product 1611-8n , cutogen no.5 hand cutting blow pipe confirming to is 7653 1975 , hose black colour for gas cutt ing for oxygen gas , allen key set of 09 pcs. 1.5.mm to 10.mm brown finish product , hack saw frame chromium plated tubler adjustable with handle , washer rubber for u seal , paper backed coated abrasive emery paper , hole punch 10.mm to 14.mm , double end open spanner set of twelve pieces 6mm to 32mm , dark glasses for welding screen , welding cable single core aluminium conductor for 600 amp dc current , regulator oxygen two stage with two pressur gauges , cutting nozzle suitable for gas cutting , hitachi portable angle grinder model pqa-100d , bush hard rubber id-19 mm x od-30 mm length-31 mm , pulling and lieting machine 1.6ton pulling 2.6t , bush hard rubber id- 32mm x od-50mm length- 50 mm , araldite in 180 gm tube , grease gun. bucket type. 20.ltrs. , m.s. d. shackle confirming to 6132 part 2-1972 for swl 1.25t , m.s.d-shackle confirming to is-6132 part-2- 1972 , m.s.shackle confirming to is 6132 part 2-1972 , m.s.d-shackle confirming to -6132 part-2-1972 for swl 3.2t , hand screen fibre without glass for welder , hose red colour for gas cutt ing for kacetylene gas ) /bid number : gem/2025/b/6583575 * /dated: 19-08-2025 & & / bid document 1 / 24

corporations/Associations/Others

CTN :41516898

15 Sep, 2025 NA

Mirzapur - Uttar Pradesh

Tender For corrigendum : supply of de-centralized materials and works for increasing capacity and installation of tf under business plan 2025-26, edd-kachhawa - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, x-arms holding clamps with bolts & nuts, f-bracket with bolts & nuts, top, dropper channel clamp with bolts & nuts for st pole, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, p.g clamps for weasel conductor, danger board with clamp & bolts, dead end clamp for pole/bracket with nuts & bolts, eye- hook, suspension clamp with nuts & bolts, j hook, all. binding wire 6 mm, 1x35 sq mm ac cable (xlpe), three phase distribution box, three phase distribution box clamp (ls), e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 120 mm2, all lugs 70 mm2, stay clamp with nut & bolts for st pole, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., st poles 11 mtr long, pcc poles 8.5 mtr long, all line materials with acsr weasel conductor, arial bunch cable 3x50+1x35+1x16 mm2, arial bunch cable 3x95+1x70+1x16 mm2, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of single support st/pcc pole for construction of 11 kv/lt line including digging of pit, fitting of all accessories, back filling of earth & others required work as per resspo norms., grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per resspo norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), earthing of poles as per resspo norms, stringing & sagging of 3 phase 11 kv line upto proper sag including laying of acsr weasel conductor, binding with insulators & jumpering as per resspo norms, laying, streaching of arial bunch cable size 3x50+1x35+1x16 mm2/ 3x95+1x70+1x16 mm2 as per resspo norms, erection of sectional double pole structure of st pole for distribution t/f, including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm wi

Ms Flanges Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others