Get complete information related to latest Ms Flanges Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Flanges Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Flanges Tenders.
Tender For bid to ras tender for supply of washer , set pin gr-8.8 , m8x30 long , washer large10.0 by 9.9idx34.9 by 34.6odx2.3th , washer m6x14mm (plate iv u) , tension pin , washer-a17.4 by 10.0idx30 by 29.5odx3.3 by 2.7thk , std plain nut , washer m12 form -a 13.4 by 13idx24 by 23.5od , fastener drive (plate iv a) , decal power & eco mode (plate iv a) , washer 7 by 16 inch large (plate iv c) , capscrew m8x30 (plate iv s) , capscrew button head m6x20 (plate iv u) , washer hardened m10 (plate iv v) , screw , set pin , clip harness support (plate viii a) , grommet 24mm dia (plate viii c) , washer (plate viii e) , bolt m8x20 long , screw button head m6x20 (plate ix a) , thin plain nut 1 by 2 inch unf(ispl sl-805) , star washer , retaining clip , lh thread , 5 by 16 inch unf , nut plain 5 by 16 inch unf , setscrew m5 x 30 (jcb super plate xi d) , nut p81 m12 (jcb super plate xii a) , cap coupling (plate xiv b) , spring by pass (plate xvii a) , cap grease nipple , bolt coated m10 x 25 (jcb super plate xviii h) , tension pin , plug breather , spring compression (jcb super plate xix d) , circlip (jcb super plate xix d) , bolt m8x45 (plate xxi c) , spring washer m6 , lock nut , thin plate nut , bolt m8x16 , screw m6 x 20 button head black (plate iv w) , washer m20 (plate vi y) , bolt , pad foam (plate iv g) , rubber washer (plate iv p) , screw gr-8.8 , m8x40 long (jcb super plate xii a) , screw m10x35 (plate xxi c) , washer , 8.7idx17.0 by 1.66odx1.8 by 1.4thk , circlip (ispl sl-941) , washer (plate iv s) , bolt (jcb super plate xviii e) , screw hex head , screw socket m8x40mm (plate iii r) , tension pin , washer black (plate iv s) , capscrew shoulderd m8x12 (plate iv s) , bolt m5 button head (plate iv ab) , plug plastic (plate vi j) , decal battery (plate viii e) , screw (jcb super plate xi c) , cap screw m5x 25 (plate xii e) , washer(ispl-1519) , bolt 3 by 8 unfx3 (jcb super page xxxix sl no-245) , set screw (plate iv c) , nut rivet m6 (plate iv u) , setscrew m12 x 30 (jcb super plate xii b) , washer , 16.5 by 16.6idx34.6 by 34.9odx2.9 thk , bolt (m12 x 40) , screw m12x35 countersunk head (plate iii n) , spring washer , grommet (plate iv h) , throttle hand knob (plate x j) , retaining clip , clamp tube (plate iii f) , set screw m10x30(plate iv v) , grommet blind (plate iii r) , bolt m12x 45 mm (plate iii t) , beading rubber (plate iii t) , lug nut m6 (plate iii u) , washer(lps) , nut plain m12 (plate iv m) , shim (plate vi b) , shim (plate vi b) , nut thin m10(plate vi w) , decal radio connectors (plate ix a) , decal fuel level (plate ix a) , screw , bolt , bearing thrust (jcb super plate xii c) , screw , screw hex soc set (plate xvi f) , spring top (plate xvii a) , bolt m10 x 40 (plate iii n) , dowl , washer , pad support (plate iv s) , bolt m6x35 (plate iv ad) , screw grub (plate iv k) , window gasket lh side (plate iv s) , screw button head (plate iv s) , bolt(plate-b2-1-4 by 26) , screw socket head m6x35 (plate iv ah) , washer m6 form-a6.7 by 6.4idx12.5 by 12.1odx1. , bolt cap(plate-b4-2-1 by 17) , nut thin m16 (plate x b) , bolt gr-5 m10x35 long , cap coupling (plate xiv d) , screw m8x 16 (plate xxi c) , worm drive clip , o ring 39.70 idx3.53 cross dia(ms sl-434) , screw hex 3 by 8 inch (plate-xxib) , nut , 5 by 8 inch unf thin , bonded washer , nut rivet , pin tension , ball , 11 mm dia (plate xxi c) , circlip (plate iv h) , fuse 3 amp(jcb super ix e-10) , setscrew m10x40(plate x p) , spacer (jcb 3dx plate e1-2-1 sl no 23) , safety clip , bolt m8x70 (plate xxviii a) , bypass seal (ispl sl no -1206) , decal (plate iv a) , window gasket rh (plate iv s) , plate compression (plate iv b) , screw , thumb screw , grommet (plate iv k) , grommet (plate viii h) , bolt , gr-8.8x50 long , cap screw m5x20 , clamp twin (jcb 3dx plate e1-2-1 sl no 30) , screw flanged m10x1.5x35 (plate xxi c) , gasket(ms sl-438) , ball , spring , bolt flanged head (plate xxi a) , washer (jcb super plate xxxix c) , washer locking (plate xxiii c) , clamp pipe holding
Tender For supply of engine mounting pad with nuts and bolts for test bed , fabricated engine mounting bracket with nuts and bolts , shaft coupling plate with nuts and bolts , connector and rubber hose for lub oil cooling system , accelerator cable connector , stop lever attachment , engine silencer exhaust fabricated with ms pipe , lub oil filing pipe with stand , oil temperature sensor connector , inlet air filter system as per sample
Tender For bid to ras tender for supply of std self lock nut m10 , shim 0.5mm(ms-146) (plate no-g1-3-1 , sl no-20) , shim 1.5mm(ms-147)( plate no-g1-3-1 , sl no-21) , o ring , gasket( plate no- c1-16-1 , sl no-3) , grease nipple 1 by 8 inch bsp , str (os-678)) , spacer block(plate -b2-18-1) , tape reflective white(plate iv r-14) , tie cable(c1-14-1) , o ring 15.2idx5.30 cross dia , 10 amps fuse , seal(b4-1-1 by 05) , screw button head m6x30 (plate iii o) , washer , 6.86 by 6.73idx25.4 by 25.2odx1.6 thk , std self lock nut m12(ispl-sl-233) , screw m5x30 button head (plate iv l) , bonded washer seal , 1 by 2 inch bsp , bolt m10 x 55 (plate iii b) , washer plain , o ring oblique seal (ispl1207 & ctlg-e3-7-1 , sl-05) , washer 3 by 4 inch bsp(os-1053) , pin hose retainer(plate-b1-17-1) , nut nylon m8 (plate iv t) , bulb(plate-viii h-10) , luck nut gr-8 m8 , screw , gr-8.8m8x25 long , washer plain (plate iv f) , washer medium , 10.0 by 9.9id x 22.2 by 22.1od , hose clamp , nut lock 3 by 8 unf (plate i) , screw (plate iii c) , washer (plate iv m) , capscrew m5 (plate x j) , o ring , bush (item no-309) , shim , std plain nut , plug blanking cap (plate vi c) , nut lock m5 (plate viii a) , washer , stud (plate xvii a) , spring comprassion t by c press main (f5-1-1) , bolt (g1-1-10) , clevis pin , bolt m6x 16 flange reduced hex (plate xxviii a) , bolt m10x80(plate-iii g-3) , screw cap (item no-1750) , setscrew mx10 20mm (plate iii d) , 20 amp fuse(plate- ix e-7) , grommet (plate-d2-1-4) , washer thrust 3.5 mm thick phosphated (plate-f5-3- , nut (a1-1-15) , reflector reflex white(plate iv r-13) , 15 amp fuse(plate-ix e-8) , spring extension (plate xxv a) , spacer , bolt plough 3 by 4 inch unfx23 by 4 inch bs311 type-9(sl-60) , bolt(ispl sl-502) , o ring 274 idx3.5 cross sec dia , bulb(plate-viii h-11) , spacer , rivet nut m10 , bolt(plate xxxi c) , seal ring turquoise , spacer(item no-562) , wheel nut , strap , worm drive clip 70mm long by clip jubilee , lock cover door lh (plate iv n) , liner bearing , relay charge over , gaiter excavator lever , bearing(plate-d1-1-2) , pad wear 7mm upper colour blue , dump switch(plate-x h-2) , blanking plug(ispl h2-7-3) , radiator top hose(plate-xxviii b-14 ) , ring seal , bowl , wiper assy front(item no -955) , pin hinge cab door (item no-306) , switch oil temperature , hose 3 by 8bsp , 530mm long(plate-e1-2-1) , radiator bottom hose(jcb super xxvii b-17) , bearing linner( ms-20) , seal , brake piston (f2-1-30) , mirror rear view(plate-xxxiii) , cover pre cleaner (plate-xxvi b) , friction plate(f5-3-40) , brake piston seal(g1-2-1) , hinge door (item no-305) , tooth (plate-a2-1-1) , seal , strut gas door(plate-iv j-1) , bearing linner , tail lamp right side(item no-907) , tail lamp left side(item no-906) , glass right side quarter light(sl-378) , element suction(jcb 3dx plate b1-2-1 sl no 4) , door seal right hand (jcb super page 95) , filter(94mm) jcb syncro shuttle (ctlg 3dx e3-8-2) , glass left side quarter light , hose 08 bsp hp 545 mm lvb to wa feed pipes(item no , hose 3 by 8 bsp , 1000(item no-1159) , liner bearing , filter element , side cutter double flange , cleaner active wiper(iv r-12 , 383) , pin pivot(plate-a1-7-2) , seal window left hand side (plate iv p) , hose , hose 10 bsp hp 560 mm lvb to wa feed pipes(item no , ignition switch , bucket dipper pivot pin(plate-vi s-1) , hose 10 bsp lp 950 mm (item no- 1158) , cable parking brake , side cutter double flange , hose , 3 by 8 inch bsp x 800long str-str , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , element air safety(p3-3-2) air filter inner , leaver tipping (plate-vi t-1) , door handle lh(plate -iv n-9) , hose assy suction(item no - 1202) , hose 06 bsp hp 1910 mma(item no-1161) , hose 10 bsp hp 700 mm(item no-1157) , fan face level 12v (c1-17-1) , adhesive(iv , r-10) , throttle cable assembly (jcb super plate xi a) , light hand lamp 12v , bush , door seal left hand (item no-323) , element air main(plate-p3-3-2)
Tender For pad link (m.s. galv. u bolt) for hand cuff lock drg no. s & t /by/f23/2.party to submit sample for approval before bulk supply of material. (shop no.07) [ warranty period: 30 months after the date of delivery ]
Tender For supply of pneumatic brake shoe liner for generator, 250 mm x 250 mm x10 mm, ron brand, b. a quality material asbestos brake liner pad , hand brake shoe liner dia_270mm thickness_10mm material asbestos brake liner pad , copper rivet for brake shoe liner dia 4.5 or 5.0 mm x length 32 mm _as per sample , ball valve half inch _material brass , rubber gasket 3mm neoprene width 1 meter , graphite braided gland packing rope 16mm square , neoprene rubber chord dia_25mm for sealing of turbine bearing chamber cover , shear pin for guide vane of horizontal francis turbine of mhs head dia 45mm shank dia 31.5mm length 105mm_material brass , graphite braided gland packing rope 8mm square , graphite braided gland packing 10mm square , ms bolt m10x70 , hex head bolt m24 x 175 full thread with nut, grade_ 10.9 , grey enamel paint in 20ltr package , oil turpentine in 1 liter container , brush painting size 2 inch , oil gasket_jointing sheet_ spitmann style 59 _ champion style 59thickness_ 3.0mm, oil compressed asbestos fibregraphited jointing sheet , hex bolt with nut, size_ m16 x l75mm or l 85 mm , neoprene rubber gasket 5 mm or 6 mm thick, width_ 1 meter , ht hex bolt m12 x l 75mm or l 80 mm + /bid number : gem/2025/b/6274986 , /dated: 10-06-2025 ( ( / bid document 1 / 24
Tender For corrigendum : supply of pad assy,95850011 plus 026,ucc , ucc esp fluidising pad a 500x500x175 , tile,thk1,ceramic,fluidizing stone , ucc silo fluidising pad 464x928x346 , ucc silo element fluidizer , ucc silo grating support for pad type a , ucc silo trough fludizer for pad type a , ucc silo element fluidizer 616x1212x346 , ucc silo fluidising pad 616x1212x346 , ucc silo frame fludizer for pad type a , ucc bh plug,25nb bsp, sq,.head , fixing clamp,6,ms,fp for silo
Tender For supply & delivery of laeks arresting materials in ae-5 section - supply and delivery of the following cid joints class 15 with drill core holes and including cost of, 100mm dia class 15 cid joints, 150mm dia class 15 cid joints, 200mm dia class 15 cid joints, 250mm dia class 15 cid joints, 300mm dia class 15 cid joints, 350mm dia class 15 cid joints, supply and delivery of 6mm thick rubber packing including taxes and conveyance etc complete as per s, supply and delivery of bolts and nuts (1/2" to 1") including taxes and conveyance etc., complete, manufacture, supply and delivery of the following hdpe pipe and spl of approved by the departmental , 160 mm dia hdpe pipe , 110 mm dia hdpe pipe , 90 mm dia hdpe pipe , manufacture, supply and delivery of hdpe specials including tranportation to anywhere in ap excludi, a) 160mm dia hdpe pipe end long necks, b) 160mm dia msflanges , c) 160mm dia hdpe bends , d) 160mm dia hdpe tee , e) 200mm dia msflanges , f) 160mm dia hdpe dummy , supply and delivery of "resilient seated soft sealing" gate valves (sluice valves) with body and bon, 150mm dia sluice valve (pn-1.60), 100mm dia sluice valve (pn-1.60), 200mm dia sluice valve (pn-1.60), "manufacture, supply and delivery of cast iron pipes, and fittings (spls.) conforming to is. no. , 7181".