Get complete information related to latest Ms Plates Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Plates Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Plates Tenders.
Tender For auction sale of rolling stock - lot no 031326030122 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxnr , bobrnel , boxncr ,available on rails. 1) scr boxnr 25099617922 ,2) er boxnr 25029698656,3) er boxnr 25029660189, 4) er bobrnel 72029682239, 5) ser boxncr 10079561494. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.sab 9.yoke pin support (1st plate),10. safety plate with anchor plate(2ndplate11.yoke support plate(3rdplate),12.yoke pin, 13)draft gear followers,14.knuckle pin.15.knuckle thrower.16.back stopper.17.bronzebuishesds8no:0999603122. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 54.813 .mt (m.s -38.069, ss-16.744) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of rolling stock - lot no 031326030121 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, bobrnr m2, boxnr , bcn m1 .available on rails. 1) ser box nr m2 25079660030 ,2) ser box nr 25079662942,3) special repair bcn m1 30069160018,4) er box nr 10029661403 ,5) scr box nr 25099636688. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. distributor valve,, 9 .sab 10.yoke pin support (1st plate),11. safety plate with anchor plate (2n d plate 12. yoke support plate(3rdplate),14.yoke pin,15)draft gear followers,16.knuckle pin.17.knuckle thrower.18.back stopper. s8no:0999603121. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 52.909 .mt (m.s -37.043, ss-15.866) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of rolling stock - lot no 031326030120 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, bcn m1 boxnr , bobrn m1 .available on rails. 1) er bcn m1 30029060266,2) scr bcn m1 30099082380 ,3) er bcn m1 30028860355 ,4) ser box nr 25079662164 ,5) er bobrn m1 72029681010 . location : road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. casnub bogies with all fittings, 9. distributor valve,, 10 .sab 11.yoke pin support (1st plate),12. safety plate with anchor plate (2n d plate 13. yoke support plate(3rdplate),14.cut of angle cock,15.yoke pin,16)draft gear followers,17.knuckle pin.18.knuckle thrower.19.back stopper.20.bcn flap,21.bronze buishes ds8no:0999603120. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 64.728 .mt (m.s -60.542, ss-4.186) sold by number basis only.05 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of rolling stock - lot no 031326030119 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxnr m2 , boxn m1 , bobrn m1 .available on rails. 1) ser boxnr m2 25079662218 , 2) nr boxn m1 10039660830, 3 ) ser boxn m1 10079662313, 4) er boxnr m2 25029660042, 5) nr boxn m1 10039660014. location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. casnub bogies with all fittings, 9. distributor valve,, 10 . sab 11.yoke pin support (1st plate),12. safety plate with anchor plate (2n d plate 13. yoke support plate(3rdplate),14.cut of angle cock,15.yoke pin,16)draft gear followers,17.knuckle pin.18.knuckle thrower.19.back stopper. ds8no:0999603119. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.063 .mt (m.s -40.447 , ss-6.616) sold by number basis only. 05 nos .delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of rolling stock - 031326010100 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons,bcn m1, boxn m1 , available on rails. 1) cr bcn m1 30019060474, 2) scr boxn m1 10099660337 ,3) ser boxn m1 10079660333 ,4) ser boxn m1 10079667271 ,5) nr bcn m1 30039018288 . location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. wheel set with ctrb, 8. casnub bogies with all fittings, , 9. yoke pin support (1st plate),10. safety plate with anchor plate (2n d plate 11. yoke support plate(3rdplate), 12., yoke pin, 13) draft gear followers,14. knuckle pin 15.knuckle thrower.16. bcn swing. ds8 no:0999603100. dt:24.01.26. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 39.124 .mt sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of depot ferrous scrap - scrap ms coach cutting items includes ms sheets, msplates, foot plates, footstep arrangements, plates, gi pipes, shutters, channels, rounds, joists, berth frames, luggage racks, coach doors (either complete or dismantled), structural and fabricated ms items, berth chains, berth chain strips, ms pipe fittings, angle, rod, commode chutes, window shutter, taps, valves, mouldings, door locks, and other similar coach cutting parts. these may include negligible nf or ss attachments and other known or unknown ms/ss attachments, unfit for railway use, lying in two stacks one on plot no. 12 and other in new ivri plot. remarks: cutting allowed to facilitate loading. however the purchaser will be responsible for any damage or loss resulting from the cutting process. [gst 18%, hsn 72044900 ]
Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1, bobrnm1, boxnr, boxnm1 & bobrm1 wagons no as following: [1] ser 30078963020 bcnm1 [2] er 72029678980 bobrnm1 [3] er 25029660899 boxnr [4] er 10029661281 boxnm1 [5] scr 10099662737 boxnm1 [6] er 72029561275 bobrnm1 [7] ser 25079662478 boxnr [8] er 72029661159 bobrnm1 [9] er 72029662002 bobrnm1 [10] cr 72019360383 bobrm1 [11] nr 10039660588 boxnm1 [12] ser 10079649802 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (144.640 mt) is the lot quantity (144.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for bcnm1, boxnr & boxnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii)for bobrnm1 & bobrm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl no. 05 and 08 are fitted with 22w(m) casnub bogie which are to be sold with wagon.
Tender For annual rates are invited from agencies doing work as per the following rates for the use of various branches of padra nagar palika and for the accounting year 2026-2027 - (1) rates for supplying stationery and printing (2) for renting out faraskhanu, photography and videography, etc. (3) repairing of computers and xerox machines in the municipality,(4) rates for meals, refreshments, tea and coffee etc. as per tender construction branch:-(1) supplying sand, gravel, wet mix, cement, rods etc. and providing jcb, tractor, equipment on hire (2) work of laying existing pavers and patching on cc roads at the place specified by the municipal corporation (3) work of painting for various works of padra municipality (4) making ms frame covers for rain gutters, fitting them at road level, and placing precast cover (5) doing barbed wire fencing, ms, street light branch: - all works related to street light as per tender and supply of materials etc, stationery branch: - supplying supplementary and stationery etc. in shri choksi k.k. girls high school and pramukh swami high school operated by padra municipality, vehicle branch: - vehicle repairing, auto electric work, buying new tires, flagging machine and fire equipment and different voltage batteries of exide company, deciding agency for insurance of mechanical vehicles, inviting rates for puncture repair of mechanical vehicles, hiring a car for office work outside the village etc. as per tender, sanitation branch: - cleaning equipment, brooms, wooden brooms, shovels, spades, pans, tarpaulin, baskets etc. flex banner (with frame and without frame), cleaning of ponds, etc., jcb machine tractor (driver, cleaning worker including rates) for filling garbage dirt for sanitation branch, encroachment branch: - building waste material, work as per tender, supplying mechanical equipment during ganesh visarjan, skilled swimmers during visarjan, wooden boat boat etc. as mentioned in the tender, providing ms pipe rafts and plates as mentioned in the tender. regarding removing the structures of the idols immersed from the lake and other waste material after dashama and ganesh visarjan, providing ms pipe rafts and fabrication and painting of msplates etc.
Tender For auction sale of others - released condemned and u/s scrap consisting, {(1) s.s wire rope (110 nos), steel atd bearing (320 nos), s steel scraps (nut, bolt, washer etc). qty- 0.370 mt approx, (2) different size bond (160 nos), number plate (355 nos), ms type-1 panal (7 nos), qty- 1.672 mt approx,(3) gi steel structure mast 6x6(19nos), 6x8(1 no), 8x8(2 nos), different st tube(39 nos), different bt tube (std) -12 nos, different size rt tube 24 nos, g.i scrap (70 kg) top fitting(37 nos), g.i bottom fitting(58 nos), g.i register arm hook-22 nos, g.i drop bracket clam-30 nos, g.i contact wire ending cone-71 nos, g.i anti falling rode-20 nos, gi no plate fitting-189 nos, st insulator cap (top)-25 nos, g.i st insulator cap (bottom)-25 nos, g.i bt insulator cap (top)-43 nos ,g.i bt insulator cap (bottom)-43 nos, g.i 9 ton insulator cap (top)-41 nos ,g.i 9 ton insulator cap (bottom)-41 nos, qty- 7.840 mt approx.}, total qty- 9.882 mt, location- trd depot seh. mode of delivery by actual weighment basis and on as is where is basis, custodian sse-trd-seh, fdp-50 days. note- cutting permitted in loadable size only.
Tender For auction sale of depot ferrous scrap - 14.04.26.03.2070 = 20.000 mts scrap ms released structural i.e. fabricated angle, channels rsj, msplates, ms sheet, , cut pcs of angle channels, ,tiber fencing, ms gate, doors, windows, ms/gi pipe, st sleeper, signal pipes, attached with ci base.ms racks, ms patti ,attached rails ,ms eur/bfr ends, trd items s&t items ie location boxes gi angle, channels ,ohe fitting, and other similar type of ms fabricated structural items with or without nuts, bolts, clamps, rivets, pipes etc. engineering work shop of all sorts and sizes. note: cutting allowed for essay loading. location: area a, adj. line no. 04 near by r/h girder neem garden stock holder: dms ward no. 04/ smm (md) mmr remarks: it is advised to bidder to see the lot personally before bidding the lot.