Latest ms plates Tenders | Government ms plates Tenders

Central Government/Public Sector

CTN :45531590

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms structure consisting of angle, girder, ms gate, filter tank, iron battery boxes, ms plates,tie bar fencing, loose tie bar, ms jali,ms water tank ,pipe structure, heavy blower,rail trolly wheel ,empty stater,crane structure ,shutter ms gate, empty rru and empty pannel structure,ms saria,gate boom,pipes,protective screen fob's and rob's and all type heavy structure similar items with or without undetchable ms ci and nf attachment intact. note - cutting allowed for easy loading only.note-while delivery if any other non-ferrous or non-similar items found in the lot will not be delivered. no pick and chose allowed.qty. on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

State Government

CTN :45525191

15 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of replacement/repair of eroded ms plates, bracing pipe, ms angles, channels, beams of aph outlet flue gas duct in unit-8, cstps during aoh.

Central Government And Public Sector

CTN :44713698

15 Jun, 2026 NA

Angul - Odisha

Tender For bid to ras tender for supply of ms plates 1000073689 : : -detailed specification as per annexure-i , detailed specification as per annexure-i , detailed specification as per annexure-i , detailed specification as per annexure-i , detailed specification as per annexure-i

CTN :45474587

16 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l.no. 98057054. scrap melting gr-d consisting of cutting sol bar, fall plate, head stock, cutting outside panel, ceiling fan down rod, wagon door & body cutting part, driver seat assy. , trough floor, electrode holder, cab window assy. cyclostyling machine, trolley, plate cutting, angle cutting, iron axle with pipe, cover of tail light head light flasher etc, tie bar fencing, pipe cutting, structure cutting, cut pieces of rod, damage emu door, lubricating felt assembly frame, mvmt,tmb,emu, mvsi impeller, mvsi duct, air duct, fan chamber, electrical pillar box, compression spring of bk cylinder, inter/after cooler tube type, lid of grease drums, partition frame, cattle guard, ms base, l.t.pannel box ferrous, , tap changer, expanded metal, vsb packing, bs door, iron window, ms rod , fire extinguisher, gate, nut , bolt, washer, wick felt carriers, pin, angle frame with or without net, r.s. joint, ms iron plate, angle, door shutter, cutting chain, net box, fencing wire and such materials fit for melting gr-d, except p-way materials such as rail, fish plate and non ferrous etc. note-some items are attached with negligible quantity of ss. qty-80mt.location-west of 40 ton weighbridge, east of inner boundary wall. condition-two days advance cutting is allowed for loading purpose only.

CTN :45458931

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap melting in which includes ms hanger, buffer patch, lever, silent block with negligible rubber attachment, broken ms roller bering without brass case, broken ms ball bering, bering cage, m paid, yoke lever, tensioning device, tension rod, spare parts of cbc, light weight/small spring, ms coller, wearing plate, nut- bolt, revits, retaining cap, buffer spendle, handle, small size of ms plates/sheets and strip, hose pipe clip, ms window frame lever/strip, dog spike, round spike, vertical/lateral shock absorber, different type of bmbc parts such as cylinder body, piston, piston packing, plunger, plunger spring, chain, circlip, piston trunk, tee bolt, ratchet, adjusting tube, released spring, spring washer, iron washer, knuckle, small cutpics of pipe, ms bush, hand brake trunnion, split pin, cotter, spare part of rail fittings, jubilee clip, dust excluder, latch, shim for plunger, special washer, ms ring, slotted nut, hex head bolt, empty casing of air brake cylinder, flange, bmbc cover, inculiding some new but absolute items available with or without negligible nf, wires, lugs etc attachments, in various sizes and other similar/unknown ferrous item which comes under melting scrap. location: - south ¿ west side of erwb. in area i. lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

Central Government/Public Sector

CTN :45433000

25 Jun, 2026 3.25 Lacs

Nowrozabad - Madhya Pradesh

Tender For supply of hss plain chaser, size 4 x1/3/64 , (one pack/set includes 04 pieces) , punch (hot die steel) suitable for 22mm hole diameter, round head, suitable for 10mm thick ms plates , hss shear and cutting blade as per drawing, approx. length 300mm , hss thread chaser, 10tpi, size 4 x1/3/64 (one pack/set includes 04 pieces)

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

Central Government/Public Sector

CTN :44719278

04 Jun, 2026 NA

Hyderabad - Telangana

Tender For bid to ras bid to ras supply of ms plates 1200 mm dia 12 mm thick,ms plates 1050 mm dia 12 mm thick,ms plates 12 m thick 830 mm dia,ms plates 12 mm thick 680 mm dia

corporations/Associations/Others

CTN :45375456

08 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of mild steel products - ms plates 6mm and 8mm is 2062 grade b with test certificate - supply of ms plates is 2062 grade b with test certificate., m.s. plate is 2062 grade b, size (6.3 x 1.5 or 1.25 x 8 mm), m.s. plate is 2062 grade b, size (6.3 x 1.5 or 1.25 x 6 mm)

Central Government/Public Sector

CTN :45374545

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous ms angle, channels from demolished platform/shed/fob with/without attachment of rails, rails used in structures, gipipes, castiron pipes, fabricated structural (ismb, ismc, isa i beams), earthin g plates, engineering items such as bridge side guards, cut mast with / without bricks, cut angles and chanels, angles with rail fittings and attachments used in engineering structures, frame of steel, ms channels, i beams, tees, framework of steel, cut rails, structural steel, ms flat, ismb, plate, round rods, doors, ismc, beam, angles, square tube with base, rolled steel joist, angles with rail attachments, tank cutting box/coach mfg fixture, pipes, gi pipes, ci pipes, cast iron items, water channel sheets, support structures and fabricated rails with or without brick/concrete, minor nonferrous wire attachments, rails used for structural support, fob materials, cut parts of girders,fob electrical channels, ladders, l angles welded with plates, bolts & nuts, mast for compressor, traversor dsl support mast in dismantled condition, fob materials consisting of angles, channels, supporting rod of beams and ms plates and with/without pipes/ fittings of all sorts and sizes in as is where is condition. pl no. 98030309. custodian: cdms-rsf-gsd-per. note: (1) cutting permission is granted to heavy nature items to lorry loadable sizes only. (2) loading by crane is also permitted. (3) if any non-ferrous materials found should be handed over to custodian. location: b row bin 16

Ms Plates Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors