Latest ms pole Tenders | Government ms pole Tenders

CTN :45416190

11 Jun, 2026 30.00 Lacs

Palakkad - Kerala

Tender For ananganadi grama panchayath ,vendor selection for supply of various mterials for mgnregs - quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, fine sand (zone iv), coarse sand (zone iii), gravel 5mm to 10mm, stone for masonry work, portland cement, m.s. tube 40 mm dia, mild steel tubes hot finished welded type, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, mild steel sheets with bolts and nuts to rest on pintels, iron pintels including weldded pin, mild steel sheets for tanks, mild steel hooks, mild steel plate, mild steel tubes electric resistant or induction butt welded, welding by electric plant, wire nails, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, flats up to 10 mm in thickness, galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm, g.i trafford profile sheet 0.35mm thick, precoated aluminium traffored sheet 0.450 mm thick, structural steel such as tees,angles,channels and rs joists, stainless steel screws 50 mm, red oxide zinc chromate primer, precoated galvanised steel plain ridges, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates, g.i pipe 40mm dia, gi plain washer thick, twisted steel/deformed bars, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charge of 10 hp engine and pump set - materials, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), adjustable span eso+si (2.35-3.40), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, solid blocks of size 30x20x20cm, solid blocks of size 30x20x15cm, hollow blok of size 40x20x10cm, interlocking c.c. paver block (80 mm thick, m-30), pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, pvc pipe 63 mm outer dia . 4kgf/cm2, pvc pipe 32 mm outer dia 6kgf/cm2, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm2, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc pipe 160 mm outer dia. 4kgf/cm2, pvc elbow 75 mm dia, pvc 45 degree elbow 75 mm dia, pvc socket/coupling 75 mm dia, pvc reducer 63x50 mm dia, pvc vent cowl 75 mm dia, vitreous china orrisa type w.c. pan size 580 mm, brass stop-cock 15 mm dia, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type water closet, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, c.i. bracket for wash basin and sinks, polyethylene water storage tank with cove

CTN :45096943

03 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For corrigendum : invitation of rates for flex printing and other items for year 2026-27 at nagar parishad rau distt. indore second call all rates should be qouted excluding gst. -flex printing (standard thickness); flex printing (black back, 280 gsm thickness); vinyl printing for stickers, etc. (including cutting); vinyl printing for branding, etc.; vinyl printing on 5mm foam sheet for branding, etc.; vinyl printing on sunpack sheet for branding, cutouts, etc.; sunpack sheet with printing for branding, cutouts, etc.; one-way vision printing and pasting for branding, etc.; eco-solvent vinyl printing for stickers, etc. (including cutting and lamination); eco-solvent vinyl printing on 5mm foam sheet; glow sign boards; acp sign boards (supply) – acp sheet base, ms tubular frame (1.5-inch), with printed retro-reflective media or radium lettering; ms poles for glow sign/acp/acrylic boards; production of various-sized 'handy plates' (handheld placards) for rallies, including handles; production of iron frames (various sizes) – 3 kg heavy-duty (made from 1-inch pipes with adequate support); production of iron frames (various sizes) – 1.5 kg light-duty (made from 1-inch pipes with adequate support); ms standee (folding) supply – size: 6x3 ft; specifications: 280 gsm black back quality, including framing; weight: 3 kg. supply of aluminum roll-up standees (manufactured with heavy-duty iron frames) – size: 6x3 ft, specification: 280 gsm black-back quality; supply of aluminum roll-up standees – size: 6x2.5 ft, specification: 280 gsm black-back quality; canopy size: 4x4x6 ft, specification: flex 280 gsm black-back quality (including stitching and carrying bag); canopy size: 6x6x7 ft, specification: flex 280 gsm black-back quality (including stitching and carrying bag); single-color pamphlets (a4 size) – per lot of 1,000 pieces; multi-color pamphlets (a4 size) – per lot of 1,000 pieces; multi-color posters (18"x23" size) with gumming sticker – per lot of 1,000 pieces; labor charges for flex installation; labor charges for vinyl pasting; installation of various types of glow sign / acp boards (including necessary materials such as concrete, sand, cement, and other supplies), inclusive of labor; labor charges for sunpack sheet installation; a4 size invitation cards (multi-color, with lamination and envelope).

CTN :45250386

26 May, 2026 26.97 Lacs

Mumbai - Maharashtra

Tender For corrigendum : providing octagonal gi street light poles and luminaries in place of dilapidated ms poles to provide adequate illumination in dark spots in sector i and vi, kane nagar antop hill mumbai-37

CTN :45223464

04 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of led lights luminaries 72w , ms pole 6m height medium grade 65mm , pvc frls insulated xlpe armoured 2 core , pvc frls insulated cable aluminium conductor , mcb single pole 6 amp 230v , ms junction box for cable connection

State Government

CTN :45178304

18 May, 2026 4.23 Lacs

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting 50w. led street light fitting on 6 mtrs g. i. pipe pole (double fitting on each pole) and on existing m.s.e.d.c.l. pole in ramai nagar at. village georai (b. b.) tq. and dist. chhatrapati sambhajinagar

State Government

CTN :45178305

18 May, 2026 3.38 Lacs

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting 50w. led street light fitting on 6 mtrs g. i. pipe pole (double fitting on each pole) and on existing m.s.e.d.c.l. pole in bhimai nagar at. village georai (b. b.) tq. and dist. chhatrapati sambhajinagar

State Government

CTN :45178307

18 May, 2026 3.38 Lacs

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting 50w. led street light fitting on 6 mtrs g. i. pipe pole (double fitting on each pole) and on existing m.s.e.d.c.l. pole in dr. babasaheb ambedkar nagar at. village georai (b. b.) tq. and dist. chhatrapati sambhajinagar.

State Government

CTN :45178309

18 May, 2026 2.54 Lacs

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting 50w. led street light fitting on 6 mtrs g. i. pipe pole (double fitting on each pole) and on existing m.s.e.d.c.l. pole in indira nagar at. village georai (b. b.) tq. and dist. chhatrapati sambhajinagar.

State Government

CTN :45178313

18 May, 2026 3.38 Lacs

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting 50w. led street light fitting on 6 mtrs g. i. pipe pole (double fitting on each pole) and on existing m.s.e.d.c.l. pole in rahul nagar at. village georai (b. b.) tq. and dist. chhatrapati sambhajinagar.

corporations/Associations/Others

CTN :45123168

21 May, 2026 9.99 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : s/f of 110 nos. 4.00 mtr. long m.s. pole alongwith path light fitting with 9 watt led bulb, armoured cable, switches etc. at sahid park ajeetganj, ward-36, zone-03, kanpur.

Ms Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

corporations/Associations/Others