Latest ms pole Tenders | Government ms pole Tenders

State Government

CTN :43206463

24 Dec, 2025 8.06 Lacs

Delhi - Delhi

Tender For supply of electrical material for day to day maintenance at head quarter, vikas kuteer, dusib. - supplying of 36 watt led panel 2 x 2 luminaries of size 600 mm (length) x 600 mm (width) housing made with white powder coated crca sheet metal and pmma diffuser suitable for operation on 150-265v 1- a.c. supply, having system efficiency 100 luman per watt and colour temperature 6500 k, cri >80 with driver having power factor > 0.90, thd 10% and efficiency > 85% driver should be ic complete, with minimum 2.5 kv surge protection complete as required. with 2 year warrenty mr, supplying of of 20 watt led energy saving batten having polycarbonate housing, colour temperature 6500k, efficiency > 100 lm/watt, suitable to work on 240v, 50hz ac supply, prewired and high efficincy electronic driver as required. (mr) with 1 year warrenty as approved by engineer in charge, supply of electric kettle having 1.5 ltr capacity 1500 watt, stainless steel material, concealed element, having power indicator, automatic cutoff, 360 degree swival base, cool touch handle and lid locking suitable to work on 220v 50hz 1 ac supply as required. mr as approved by engineer in charge, supply of 125 amps. four pole isolator suitable to work on 440 volt ac three phase supply as reqd. mr., supply of 100 amps. four pole isolator suitable to work on 440 volt ac three phase supply as reqd. mr., supply of ceiling fan 1200mm sweep super white colour with 3 nos aluminum baldes and body suitable to work on 220/240 volt, 50hz a.c 1- supply, copper winding, power input 70w, speed 380 rpm, air delivery 210 + 5%, etc as reqd. (mr), supplying of two module stepped type electronic fan regulator suitable to work on 220v 1- 50hz ac supply, 5 steps speed regulation as aproved by engineer in charge with 12 months warrenty. mr high speed 100w., supply of mfd capacitors 2.5 mfd/440v/plww/28x52 having plastic casing/copper wire terminal isi mark suitable to work on 220/240 volt, 50hz a.c 1- supply etc as reqd. (mr), supply of mfd capacitors 3.15 mfd/440v/plww/28x52 having plastic casing/copper wire terminal isi mark suitable to work on 220/240 volt, 50hz a.c 1- supply etc as reqd. (mr), supplying of wire less door bell having tune duration 3 sec, range upto 100 m in open air tunes 25 selectable polyphonic tunes, volume options 3 working radio frequency 433.33 mhz, operated by one pc 12 v 23 a battery( included) suitable to fix on wall as required by engineer in charge. mr, supplying of ding dong door bell having time duration 3 seconds, sound range > 50 m, white colour suitable to fix on wall as required by engineer in charge. mr, supplying of 6a extention board, pvc/metal body, 16a spike guard and having 4 nos 6a socket outlet , one switch with 4 mtr copper wire with power cord 0.75mm(3 core)as required as approved by engineer in charge mr, supplying of food warmer, hot case made of heavy carbon steel body, with toughened glass, fitted with tubular elements, adjustable thermostat and temerature switch ranging upto 150 degree celsius wattage 650-800 watt suitable to work on 230v 50hz ac supply with minimun dimension 63 x 47 x 26 cm (2 layer ) fitted with isi mark heavy duty moulded plug complete as required with 1 year warranty as approved by engineer in charge, supplying of 15/16 a modular switch, one way, isi marked to be used on the existing modular plate and switch box etc as required, supply of 15/16 amp 3 pin plug top heavy duty isi marked suitable to work on 220/240v , 50hz ac supply single phase etc as required. make mr, supplying of 6 pin 15/16 a modular socket outlet, isi marked to be used on the existing modular plate and switch box etc as required, supply of heat convector with 3 heat setting 600/1200/2000 watts, adjustable thermostat for desirable temperature, cool touch handle for easy mobility, adjustable height. warranty 02 years, etc. as required as approved by engineer in charge, supplying of insulation tape roll 0.125 mm size & length 6.5 mtr long as required(mr

Central Government And Public Sector

CTN :43054604

05 Jan, 2026 16.68 Lacs

East Singhbhum - Jharkhand

Tender For corrigendum : supply of operation and comprehensive maintenance of ems at garamnala te build jsr d d--acom of em services as per spec and inventory etc. attached., replacement 100amps 4 pole isolator, replacement 63amps 4 pole mcb, replacement 32amps 3 pole mcb, replacement 40-63amps dp mcb, replacement 6-32a spmcb , replacement 100 amps 415v hrc fuse links- din type , replacement 125 amps 415v hrc fuse links- din type , replacement 63 amps 415v porcelain fuse unit, supplying and drawing 3x1.5sqmm wireing, supplying and drawing 2x1.5sqmm, supplying and drawing 3x4.0sqmm, sf pvc junction box along with 150 amp 4 way connectors , suppllying 4x10 sqmm , supplying 2x6sqmm , laying of cable in ground, laying of cable on wall surface , laying of cable in the existing rcc/ hume/ metal pipe, s/f of 40 mm dia g.i pipe medium class i as per nit., s/m end term. with brass gland and alum lugs 4 x 10 sq. mm , sm end term. with brass gland and alumi lugs 2 x 6 sq. mm , repl. 63 amps 415 volts tpn sdfu with hrc fuses , repl. 125 amps 415 volts tpn sdfu with din type hrc fuses, repl. 250amps 415 volts tpn sdfu with din type hrc fuses, repl 63 amps 415 volts tpn sdfu in sheet , s/f 36 /40-watt fluorescent tube rods, s/f starter for fl. fittings , s/f 9 /10-watt led lamp (b22), s/f 12/15-watt led lamp (b22/e27), s/f 20/22w ultra bright led retrofit tube light , s/f 24w led battype high eff 115 lm/w, replacement angle/batten holder, replacement 36/40 w fl tube light holder, replacement 36/40 w fl tube light starter , replacement ceiling rose, replacement 5/6amps 250 volts 3 pin plug top, 15/16amps 250 volts 3 pin plug top, replacement 6 /10 amps 1 way piano type switch , replacement 16 amps 1 way piano type switch , replacement 6 amps 3 pin type socket, replacement 16 amps 3 pin type socket, rewinding of 1200mm/1400mm ceiling fan etc. as required., repl stepped type electronic fan regulator (switch type), rep 2.25 mfd 440 volts capacitor for ceiling fan, bearings for ceiling fans etc as required (make skf/ss), rewinding 380mm 1500 rpm heavy duty exhaust fans, supply and replacement of 45 watt street light, supply and replacement of 27 watt street light, s/f diesel filter with o ring (primary), s/f lub oil filter with o ring, s/f diesel filter with o ring (secondary), s/f engine oil(mobil), sevicing by authorised dealer /oem for 200kva dg set

Central Government And Public Sector

CTN :43095507

05 Jan, 2026 21.95 Lacs

East Singhbhum - Jharkhand

Tender For corrigendum : tender for supply of operation and comprehensive maintenance of ems at kadma te build jsr d d - as per item no-1 of sh-i sor in sec-3 part c of atc , replacement 100amps 4 pole isolator , replacement 63amps 4 pole mcb , replacement 32amps 3 pole mcb , replacement 40-63amps dp mcb , replacement 6-32a spmcb , replacement 100 amps 415v hrc fuse links- din type , replacement 125 amps 415v hrc fuse links- din type , replacement 63 amps 415v porcelain fuse unit , supplying and drawing 3x1.5sqmm wireing , supplying and drawing 2x1.5sqmm , supplying and drawing 3x4.0sqmm , sf pvc junction box along with 150 amp 4 way connectors , suppllying xlpe 1.1 kv al 4x10 sqmm cable , suppllying xlpe 1.1 kv al 2x6 sqmm cable , laying of xlpe cable in ground , laying of xlpe cable on wall surface , laying of cable existing rcc/ hume/ metal pipe , sh 40 mm dia g.i pipe medium class ias per nit. , sm end term with brass gland and alum lugs 4 x 10 sq. mm , sm end term with brass gland and alumi lugs 2 x 6 sq. mm , repl. 63 amps 415 volts tpn sdfu with hrc fuses , repl. 125 amps 415 volts tpn sdfu with din type hrc fuses , repl. 250amps 415 volts tpn sdfu with din type hrc fuses , repl. 400a fp mccb , 36ka overload rel , repl 63 amps 415 volts tpn sdfu in sheet , s/f 36 /40-watt fluorescent tube rods , s/f starter for fl. fittings , s/f 9 /10-watt led lamp (b22) , s/f 12/15-watt led lamp (b22/e27) , s/f 20/22w ultra bright led retrofit tube light , s/f 24w led battype with very high eff 115 lm/w , replacement angle/batten holder , replacement 36/40 w fl tube light holder , replacement 36/40 w fl tube light starter , replacement ceiling rose , replacement 5/6amps 250 volts 3 pin plug top , 15/16amps 250 volts 3 pin plug top , replacement 6 /10 amps 1 way piano type switch , replacement 16 amps 1 way piano type switch , replacement 6 amps 3 pin type socket , replacement 16 amps 3 pin type socket , rewinding of 1200mm/1400mm ceiling fan etc. as required. , repl stepped type electronic fan regulator (switch type) , rep 2.25 mfd 440 volts capacitor for ceiling fan , bearings for ceiling fans etc. as required (make skf/ss) , rewinding 380mm 1500 rpm 230 v heavy duty exhaust fans , supply and replacement of 45 watt street light , supply and replacement of 27 watt street light , dehyd filt & testing of existing trasformer , supplying of new transformer oil , replacement gasket of transformer , replacement lt side stud bush , painting of transformer with good quality synthetic paint , s/f diesel filter with o ring (primary) 160kva d e/a set , s/f lub oil filter with o ring 160kva d e/a set , s/f diesel filter with o ring (secondary) 160kva d e/a set , s/f engine oil(mobil) 160kva d e/a set , sevicing by authorised dealer /oem for160kva dg set

CTN :43252526

09 Jan, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of push button black , spring , pipe nut , hexagon head screw , piston rod 1 2 94.4 mm , piston rod 1 2 112.4 mm , hexagon head screw , braacket for unloading mechanism , nut , cone , dowty ring , dowty ring , refrigerant pressure gauges , low pressure cutout , zinc plug , v-belts , indication lamp lens , fuse , contact kit for starters , auxiliary contactor , indicating lamp red led type , lamp assembly , phase failure relay , toggle switch , door limit switch , space heater 60w 230v ac , motor protection relay mpr 300 8-22a , power contactor 12a , motor protection relay 300 1-2.75 , relay , timer , voltmeter , control transformer 415/230 vse 500 va , fuse 32a , fuse 6a , bulb for indication lamp , high pressure low pressure and oil pressure cutouts , dial type thermometers , neoprene inch o inch ring , grease cup , hex. head bolts & nuts (for srl no. 6) , drain train defrost heater , drain pan defrost heater , condenser zinc plugs , condenser zinc plug 1 2 , suction line globe valve , solenoid valve (llsv) , thermostat for cold room , nab valve 50mm , gun metal valve , oil separator , accel make shell & tube condenser , danfoss make oil separator with inlet and outlet connection , dowty rings for compressor , v-belts , v-belt for seawater pump , gasket set for compressor , set of sealing rings , set of sealing ring for smc-2-65v , half section bearing for crank shaft , bushing for piston pin , piston pin (guide pin) , scrapper ring , split pin , cylinder liner , unloading cylinder housing , crank case heater element , three way solenoid valve-230v , suc & oil pressure gauges for r-22 , low pressure switch , high pressure switch , thermostatic expansion valve , pressure gauges (water) , cooling fan for compressor motor , fan motor for product cooler 0.5hp , soft starter , contact kit for contactor , hrc fuse 32 amps , push buttons , v contact element for p b s , bulbs for indication lamps , lens for indication lamp , lens for indication lamp , lens for indication lamp , lens for indication lamp , lens for indication lamp , open spanner set , ring end spanner set , continuity tester , hammer 2 kg , tube cutter , gasket cutter , oil charging hose , charging manifold (modofied) , nitrogen / freon cylinder adopters , allen key set , crank case heater assembly , thermostatic expansion valve , three way solenoid valve -230 v , refrigerant pipes made of copper , high pressure-low pressure and oil pressure cutouts , thermostatic expansion valve complete on plant , stem type thermometer , o.p.cut out , l.p.cut out , h.p.cut out , thermostats , thermostat for cold room , thermostat for cool room , forced air-cooling unit fintex-eqvt- make for cold room , shock mounts for compressor , shock mounts for control panel , shock mounts for cooler , high pressure-low pressure and oil pressure gauges , sea water inlet / outlet gun metal valves , allen bolt , sdnr valve 32mm , coupling piece , gasket , magnetic plug assembly , oil charging valve assembly , neoprene inch o inch ring , unloading cylinder for single pipe connection , oil strainer , bushing with collar std , castle nut , piston ring , split pin , unloading cylinder housing , coupling piece , coupling pin , gasket set for 6-65 compressor , coil defrost heater (brass tublar) , coil defrost heater (brass tublar) , suction stop valve 1x1 8inch , discharge stop valve 1x1 8inch , liquid line sight glass , valve spring , back pressure valve , liquide line filter drier , filter drier catchall , shock mounts for ahu , liquid line solinoid valve , sdnr valve 65 mm , thermometer (0 to 50 c) , liquid sight glass 7/8inch , ammeter 0-125 amp , fuse 2 amp control fuse , fuse 125 amp bolted type , ahu motor (7.5 kw 415v 50hz 3 phase 2 pole) , charging line , gasket kit , suction cover , capacity control solenoid valve , flow switch , oil pressure gauge , thermostatic expansion valve , low pressure gauge , pressure transimitter , dail gauge , oil pressure cut out , limi

CTN :43208516

24 Dec, 2025 2.13 Lacs

Chandigarh - Chandigarh

Tender For maintenance of e.i in rb at chandigarh. (addition/ alteration of e.i in house no. 83, sector-23, house no. 320 and 3947, sector-22, chandigarh). - dsr item no. 1.15rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group a., group b., dsr item no. 2.18 supplying and fixing 20amps, 240 volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required., dsr item no. 1.16rewiring for twin control light point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required., dsr item no. 1.17supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, 3 x 4 sq. mm, dsr item no.1.21supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 25mm, dsr item no.1.23supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required., 5/6 amps switch, 2 way 5/6 a switch, 3 pin 5/6 a. socket outlet, dsr item no. 1.29 supplying and fixing metal box of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required., dsr item no. 1.30 supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required., dsr item no. 1.33supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., dsr item no.1.38 supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required., dsr item no.2.3 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/ isolator), 12 way, double door, dsr item no. 2.4 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (but without mcb/ rccb/ isolator)., 4 way (4 + 12) double door, dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, double pole, triple pole and neutral, supply and erection of electronic step type socket type fan regulator in existing b.l. sheet including making connection and petty material reqd. to complete the job. the fan regulator should be of anchor panta / havells reo/ gold medal essenza make only., supply and erection of b.l. holde

CTN :43261015

09 Jan, 2026 NA

Gwalior - Madhya Pradesh

Tender For tender for supply of refrigerant gas 410c , refrigerant gas 407c , led flood light 200 watt , led street light 60watt , led bulb 09w , led bulb 07w , led batten 4ft long 20w , cable pvc copper conductor , cable pvc aluminium conductor , submersible cable flat , submersible cable flat , mccb , mccb , mccb , mcb , mcb , mcb , mcb , mcb , mcb , ml -4 power contactor , power contactor 4 pole 25 amp , gi pipe medium grade 80mm , gi pipe medium grade 50mm , offload changeover switch in sheet metal enclosure , offload changeover switch in sheet metal enclosure , onload changeover switch in sheet metal enclosure , star delta starter fully automatic 3 phase , sluice valve pn 1.6 150mm , sluice valve pn 1.6 100mm , sluice valve pn 1.6 80mm , heat shrinkable straight through joint kit , heat shrinkable straight through joint kit , lead wool , pvc flexible cable twin twisted copper conductor , cable pvc copper conductor single core , cable twin core flexible , pvc copper wire single core , pvc copper wire single core , pvc copper wire single core , modular socket , modular switch , modular switch , plug top , switch piano flush type single pole , plug top , industrial type plug & socket spn , spindle and nut gun metal for sluice valve , butterfly valve , butterfly valve , spindle and nut gun metal , butterfly valve , gate valve brass , gate valve brass , gate valve brass , gate valve brass , gate valve brass , cp brass ball valve , spindle and nut gun metal for sluice valve , cp brass ball valve , cp brass ball valve , cp brass ball valve , cotton waste , lead pig , led star bulb , rubber mating , gi wire , electronic step type regulator two module , hrc fuse , tape insulation , tape insulation , rubber sheet neoprene rubber sheet , over load relay , tinned copper fuse wire , tinned copper fuse wire , tinned copper fuse wire , tyton joint for di pipe line , tyton joint for di pipe line , distilled water , hrc fuse 160 amp , hrc fuse 125 amp , hrc fuse 63 amp , spunyarn , lamp holder pvc insulated body , lamp holder pvc insulated body pendent type , hacksaw blade isi marked , nut & bolts , nut & bolts , nut & bolts , nut & bolts , gland packing , gland packing , gland packing , gland packing , tape teflon , pvc gang box for switch socket , capacitor , ct rating , m seal , rubber sheet neoprene rubber sheet , capacitor , electric rubber hand gloves , water test kit , ceiling rose 3 terminal , rawal plug pvc type , aluminium ferrule , aluminium lugs , copper lugs , aluminium ferrule , aluminium lugs , aluminium lugs , aluminium ferrule , aluminium ferrule , cp bib cock , pvc bib cock , pvc bib cock , cp angle cock , pvc angle cock , pvc connection , float valve , pvc flushing kit , pvc lid for plastic water tank , gi socket , glass pane plain , glass pane plain , floor spring for aluminium door , plywood , stainless steel door handle , stainless steel door handle , butt hinges ms , butt hinges ms , lock for aluminum door , bathroom cabinate double mirror white colour with sliding bolt , pvc corner self , looking mirror , steel screw , steel screw , steel screw , door stopper brass , tiles piece , power contactor , power contactor , gate valve brass , butterfly valve

CTN :43261157

09 Jan, 2026 NA

Gwalior - Madhya Pradesh

Tender For supply of misc item - led 36-watt down light, lt ug armoured cable xlpe insulated with aluminium conductor, cable pvc copper conductor twin core, mccb, mcb, onload changeover switch, onload changeover switch in sheet metal enclosure 415v 4 pole, 200a, dol starter 3 phase 7.5 hp

CTN :43206377

30 Dec, 2025 NA

Rupnagar - Punjab

Tender For e.i for setting up of work station system in the audit branch of administrative office in p.u campus, sector-14, chandigarh - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls/hffr pvc insulated copper conductor single core cable etc. as required (dsr 1.8), group c (dsr 1.8.3), rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable and 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/pvc conduit including dismantling as required (dsr 1.15), group c (dsr 1.15.3), supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required (dsr 1.17), 3 x 2.5 sq. mm (dsr 1.17.12), 3 x 4 sq. mm (dsr 1.17.21), supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required (dsr 1.21), 25mm (dsr 1.21.2), supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required (dsr 1.22), 75 mm x 75 mm x 60 mm deep (dsr 1.22.1), supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (dsr 1.24), 5/6 a switch (dsr 1.24.1), 3 pin 5/6 a socket outlet (dsr 1.24.4), supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. (dsr 1.28), 3 module (dsr 1.28.2), 6 module (dsr 1.28.4), 8 module (dsr 1.28.5), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required (dsr 1.31), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required (dsr 1.32), supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (dsr 2.4), 4 way (4 + 12), double door (dsr 2.4.1), supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.(dsr 2.10), single pole (dsr 2.10.1), supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required. (dsr 2.16, providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (dsr 5.18), supplying, drawing, installation, testing and commissioning of cat6a utp 4 pair, 23 awg solid copper cable in existing conduit/ on surface, u/ftp, lszh, non-plenum, horizontal (solid) cable suitable for high speed data networking application supporting upto 10gbps over a 100 meter channel. the 4 unshielded twisted pairs (utp) cable with color coded insulation for easy indentification should have flame properties i.e. flammability test - iec 60332-1, smoke density - iec 61034, lszh standards compliance: ansi/tia- 568 c.2, iso/iec 11801

Corporations And Associations And Others

CTN :43228189

25 Dec, 2025 1.49 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at pul pehladpur ward no. 179 in central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hp max output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml. weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration ,on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle : should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only. certification : must have valid en certificaton, petrol operated pole prunnerengine : single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 cc power output : should be minimum 1.2 hpweight (dry without cutting attachment & fuel ): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capcity (ml): must have minimum 200 ml.clutch : clutch shoe linining should be metal only.guide bar length : minimum 30cm guide bar and chain : should have same manufacture only .chain type : every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max.output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain ( cm ) : should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - extended. sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle - extended poistion : should not be more than 5.5 m/s2certification : must have tuv certification with test standard en iso 11680., hedge trimmerengine: 2- stroke - single cylinder air cooled.engine displacement: should be between 20-25 ccpower output: should be minimunm 1 hpfuel tank capacity: minimum 400 mlweight: should not be more than 6.0 kgclutch: clutch linning should be metal only.handle: must have rotating multi-function handleanti vibration system: must have spring loaded technology for anti vibration system design: should have double sided blade with tooth spacing minimum 35mm bar length: minimum 600 mmblade: should have chrome plated -anti corrsion. stroke rate ( l/min): minimum 3000 vibration level m/s2 at right handle: should not be more than 3.5 m/s2.sound pressure level (db..(a)): should not be more than 95certification: should have tuv with en iso 10517:2009, lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

State Government

CTN :43254830

27 Dec, 2025 NA

Jamshedpur - Jharkhand

Tender For supply and installation of related furnishing materials hanger , brand new ceiling of hanger , carpeting , waterproof tent with brand new fabric of , size-10 x 10 ft. , bonquet table with table cloth & frill , double table with cover & napkin , bonquet chair with cover & ribbon , single seater sofa , special wooden chair , centre table , podium with event branding , 3 ft height stage for the pannel discussion with 2 nos. of , staircase & steel railing of size 40 ft x 20 ft , 4. ft height stage for the cultural program with 2 nos, of staircase & steel railing of size 40 ft x 20 ft , welcome box gate , thematic welcome gate with decoration , thematic stage backdrop , colourful draping & celling work in the open area , wooden flooring , walling on wooden frame , german pagoda , flower decoration , dustbin , mojo barricading , flower pot , fire extinguisher , colourful flags , electrical work , light pole with 8 nos. 200 wt. led white light , colourful light decoration in & around the venue rice light & , colour led metal light , 5/15 amp plug board , led screen for 03 days , mist fan , standing fan , led tube lights 22 wt. , cabling/wiring and installation of pannel box , pa system for speech & pannel discussion to cover a area of , 10000 sq.ft. , sound system for cultural program , stage truss with light arragements

Ms Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government And Public Sector

Corporations And Associations And Others

State Government