Latest ms trusses Tenders | Government ms trusses Tenders

Central Government And Public Sector

CTN :44156215

14 Mar, 2026 42.62 Lacs

Chamba - Himachal Pradesh

Tender For supply of upper fixed labyrinth hincmr20meatb21206 rev b , upper rotating labyrinth hincmr20meatb32203 rev a , lower fixed labyrinth hincmr20meatb22212 rev c , facing plate lower for bottom ring in 10 segments hincmr20meatb22203 rev c , facing plate upper for top cover in 10 segments , breaking bolt for facing plate as per drawing , special screw m 12 to be fabricated as per drawing or sample , special bolt m30 item no 235 drawing no hincmr20meald50001 to be fabricated as per drawing or sample

Central Government/Public Sector

CTN :44060218

27 Feb, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of fabrication - taper pin as per drg. 46100402188/02 with matl. as per specn. aa10208/07 , valve shaft as per drg. 36140002396/01 with material as per specn. hy10770/02 , cover - packing gland (hy-960.01.a.12) - as per drg. 46149600397/01 with matl as per specn. aa10108/11 , bearing spacer (hy-358.00) - as per drg. 36100000666/03 with matl as per specn. aa10119/15 , valve lever - fabricated and m/cd item as per drg. hy-378.01.16/00 with matl as per drg.

Central Government/Public Sector

CTN :44031526

21 Feb, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 15 )items as given below ,[1] disman,corroded rain water pipe&gutter 40.000 to,[2] disman,sheet,cgi on roofing/walling 17500.000 m2,[3] clng,gutter,transpt to slag bank 3000.000 m,[4] fab,strl steel w/bolt,nut 60.000 to,[5] ern,fabricated strl steel wrk,item no4 60.000 to,[6] ern&fixg,sheet,cgi/frp 16000.000 m2,[7] disman,rain water pipe by gas cutting 100.000 m,[8] fab&ern,rain water pipe,ms 100.000 m,[9] cutg,cgi sheets 300.000 ea,[10] prvdg,fillet weld,thk6mm 100.000 m,[11] lifting,fab strl steel matl 60000.000 kg,[12] apply two coats primer clear epoxy paint 1200.000 m2,[13] labour chrg,mkg sheet curved,cgi 500.000 m2,[14] fixg,loose sheet,cgi 4000.000 m2,[15] clrg u/gnd drn pipe upto & incl 600 mm 200.000 m

Central Government/Public Sector

CTN :43987164

20 Feb, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap coach cut parts , foot step, guide, bracket, safety strap, pin, beam, wearing plate, compensating rings, round, bolt, hanger, destruction tube, ms sheet, plate, collar, pipes, angle, flat, strip, rod, round, suspension strap, valve, ctrb bearing and its parts,retaining ring, roll bar, lever, tube, spring, safety strap, ,rail piece, fabricated structure item, p way items and other similar items. with or without negligible non-ferrous attachment if any. [bin 24]

Central Government/Public Sector

CTN :43977935

09 Mar, 2026 NA

Erode - Tamil Nadu

Tender For fabricated bogie frame assembly with brake gear arrangement for wag7 as per rdso spec. no. vl spec-6 (rev.03) oct'2015 & str no. mp.str.vl-02.02.11 (rev.1) oct'2015 (htsc fab-11) and brake gear arrangement as per clw drg. no. 06/1/19/108 alt.4 (sheet no. 1) & 06/2/19/108 alt. nil (sheet no. 2), and with piping arrangement to drg no 06/1/20/1 alt 6. note : supply by sources only from ireps vendor directory: (1)fabricated bogie frame assembly with brake gear arrangement for wag7 - clw item id:-2101023. (2)for brake cylinder clw item id: 2100826 (3) for brake gear arrangement clw item id: 2101027.note: supply by sources as per clw id: 2101023 only. however, they should procure the brake cylinder exclusively from vendors approved for clw item id 2100826 and should procure the brake gear arrangement exclusively from vendors approved for clw item id 2101027 for use in the bogie frame assembly. the proof for the same, i.e.,purchase documents/test report to be submitted along with supply, otherwise, item will be rejected.

Central Government / Public Sector

CTN :43953749

26 Feb, 2026 NA

Multi City - Multi State

Tender For supply of light weight tent pre-fabricated water proof for art equipments & crane equipments.firms shall offer clause wise compliance for the attached specification, else their offer will be summarily rejected.annexure- atechnical specification of light weight tent prefabricated waterproof (for art equipment and crane equipment)s.no description value1. product dimension (lxwxh) (16-18ft)x(12-14ft)x(8ft)2. item weight max 30 kg3. shape rectangular/square4. occupancy 10 persons5. included components poles. connectors, pole bags, inner tent, outer sheet. tent pegs, pegs carry bags, tent wheel bag, manual, floor mat, door and window with mosquito net and other accessories required to erection and folding6. water resistance yes (2000 to 5000 mm)7. special features suitable for all seasons, wind resistance up to 20 kmph. easy to stand and assemble by 4 people within 10 minutes.8. tent material components:fly outer fabric 410 gsm og w.p.polyster viscose dope dyed to specification no.- pro/4369/fwppv/rip/tc-11/1(a) for dyed tent.linen inner - fabric green 205 gsm polyster viscose dope dyed as per specification no.-prov/s/4569/fabric green pv/tc-11/29(b). (for dope dyed tent)end curtain -410 gsm og w.p. polyster viscose dope dyed to specification no.-prov/4369/fwp pv/rip/tc-11/1(a) lined with fabric green 205 gsm polyster viscose dope dyed as per specification no.-prov/s/4369/fabric green pv/tc-11/2(b). (for dope dyed tent)metal component - as per specification no. cqa(gs)/us/467/(d)9. availability of tent report from nabl/ilac accredited or central government lab to prove conformity of products to specification. yes10. test report to be furnished to buyer on demand yes11. installation & demonstration at consignee location12. warranty as per irs condition

Central Government/Public Sector

CTN :43698963

07 Mar, 2026 2.99 Crore

Poonch - Jammu And Kashmir

Tender For provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led light fittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security light fitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, breaking capacity,

Ms Trusses Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector