Latest ms trusses Tenders | Government ms trusses Tenders

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

CTN :45388423

15 Jun, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of excavation in trenches not exc 1 point 5 mtr wide and 1 point 5 mtr deep , excavation in trenches not exc 1 point 5 mtr wide and 2 mtr deep , returning filling spreading lavelling watering and well ramming , removing excavated material not exc 50 mtr , s and l 50mm outside dia double corrugated pipe , stret light bracket welded and fixing in position complete , supply and fix steel tubular pole 410 sp 22 , 20 mm stone aggregates , 40 mm stone aggregates , pvc insulated water proof 1point 5 sqmm 3 core copper cable , s and f repair of 5kw 3 phase authomatic street light timer switch , supply and fixing street light junction box size 260mm by 210mm by 116mm , wall mounted fan 400mm with all complete accessories , supply and fix water cooler capacity 80 litre , supply and fix deep freezer glass top 320 litres and having double door , supply and fix refrigerator capacity 310 litres bee 5 star , copper wire 1 point 5 sqmm 2c with all accessories , switch socket combination 3 pin 5 or 6a , supply and fix switch socket combination 5 in 1 and 5 or 16 amps , m and l for sub main wiring with 3 run of single core 2 point 5 sqmm , supply install testing and commissioning of 50 kva voltage stabilizer , m and l for pipe earthing galvanised steel 40mm bore , supply and fix on load change over switch 4 pole 100a 415 volt , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) * /bid number : gem/2026/b/7549042 + /dated: 01-06-2026 ' ' / bid document 1 / 25

CTN :45530810

22 Jun, 2026 NA

Faizabad - Uttar Pradesh

Tender For supply of led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , lighting pole or post and hardware - tubular street light poles (v2) (q3)

State Government

CTN :45530895

22 Jun, 2026 NA

Kakrapar - Gujarat

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2)

CTN :45513998

23 Jun, 2026 NA

Faizabad - Uttar Pradesh

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2)

CTN :45488935

30 Jun, 2026 41.38 Lacs

Murshidabad - West Bengal

Tender For procurement of esp spares for unit 4 esp overhauling during under ahp-em,stage ii during 2026,sgtpp - procurement of esp spares for unit 4 esp overhauling during under ahp em ,stage ii during 2026,sgtpp, ci bearing,collecting rapping ( plain bearing (ci) for crm & erm system,mat-is-210 gr-20 with 02 nos bolt, id-51 mm and 50 mm thickness. ), ci bearing for erm vertical shaft for esp dia-40mm. ( bush along with outer assembly. ), set ring for bush bearing for esp for 500mw esp, thrust bearing of em vertical rapping shaft ( mat-en-8. ), bottom bearing # of em rapping vertical shaft, major pin wheel big ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), minor pin wheel small ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), heating element for esp hopper for esp for 500mw esp. ( 440vac,for 500mw bhel esp, rating-500w. ), heating element for shaft insulator for esp for 500mw esp. ( for 500mw bhel esp, rating -1.0kw,type- breathing type tubular, 415v. ), heating element for support insulator for esp for 500mw esp., shaft insulator for esp for esp for 500mw esp. ( suitable for 500mw esp,make-m/s. bhel. ), support insulator, type-cylindrical for esp for 500mw esp ( od: 435 + 10 mm; id: 379 + 10 mm; height: 375 + 5 mm,for 500 mw bhel make esp. ), anvil for shock bar assembly #, inner arm for rapping hammer for esp moc-en 8 ( inner arm(ms) for rapping hammer suitable for m/s. bhel make esp ,2x500mw. ), emitting electrode for 500mw esp for esp model faa-9x45m-2x100150-2, hammer assembly,em rapping system # ( outer arm/hammer for eerm of 500 mw bhel make esp ), hammer assembly,col rapping system # ( outer arm/hammer for cerm of 500 mw bhel make esp ), pin insulator for disconnecting switch for esp c.no-71-999, crm horizontal shaft, dia-50mm for esp shaft 1-3 length -4250mmrnshaft 2-3 length -4650mmrnshaft 3-3 length -4790mm ( moc- en8, 400 mm pitch, as per drg. no: 2-79-725-04299 of 500mw bhel unit. section: 02,03 & 04. sleeve tube to be given seperate 04 nos. per set. ), shaft,end,d50xl940mm,en8 w/key&key slot for esp cerm shaft as per bhel drg no: 2-79-725-04299 ( moc: en8 ), shaft,eerm shaft,vertical,dia-40mm for esp 9900mm long,with sleeve,moc-en8 or080m40-bs970 or equivalent ( for 500 mw bhel make esp ), shaft,eerm shaft,horizontal,dia-50mm for esp 9270mm long,with sleeve and set rings,moc-en8 or080m40-bs970 or equivalent ( 03 parts(part-i with key,part-ii & part-iii) with 02 number set ring,02 number sleeve.bhel drawing no.-2-79-716-03812. ), gdrm d-50 shaft moc-en-8 with 19 holes for 500 mw esp serial no-faa-9x45m-2x100150-2 , 3 parts shaft with 19 holes.shaft with sleeve and set rings., big hammer for cerm shaft for 500 mw esp serial no-faa-9x45m-2x100150-2 drg no:2-79-725-04299

State Government

CTN :45507973

22 Jun, 2026 NA

Kakrapar - Gujarat

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2)

CTN :45485779

18 Jun, 2026 49.39 Lacs

Hardoi - Uttar Pradesh

Tender For supply of led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , lighting pole or post and hardware - tubular street light poles (v2) (q3)

Central Government/Public Sector

CTN :45473211

13 Jun, 2026 NA

Mumbai - Maharashtra

Tender For (supply)-supply of under frame swivelling type 200/180 watts led rolling in examination light arrangement duly housed in ms box with 20a, 230v dp mcb safety protection with minimum wall thickness of 2mm of suitable size with powder coated and twin glass fixing mounted with along with residual current protection operated on 190v-240v ac supply with load current 16a conforming to is 12640 (part 2):2008 iec61009-1:1996 or latest or latest with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 16a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5 and with 180/200 watts led flood light fitting with clamp set of 50mm pipe for the length of 750mm with 180 degree rotating arrangement with full set led flood light [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45475154

30 Jun, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and getting out in an

Ms Trusses Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector