Latest mv panel board Tenders | Government mv panel board Tenders

corporations/Associations/Others

CTN :40884410

14 Jul, 2025 18.26 Lacs

Moradabad - Uttar Pradesh

Tender For supply and installation of furniture for scada control room at 33/11 kv s/s company baag distt. moradabad under moradabad smart city project distt. moradabad. - supply and fxing combind 5 user console desk size 5500mmx800mmx750mm operator control desk will have following features: 1- profile structure of operator desk will be of 3mm thick extruded aluminium with supporting crca top & bottom frame. colour: as per approval. 2- tabletop is made of 25mm mdf board. colour: as per approval 3- separate horz. cable routing wire baskets for power & data cables will be provided 4- power distribution sockets (each user stations will be provided with 2 nos separate pdb units (1 for main & 1 for ups line) each pdb unit will have 6 points of 5/15a sockets with mcb. 5- 25mm mdf board side panels (fixed side panels). colour: as per approval. 6- 18mm mdf front & back modesty panel/shutter (openable with hinge and locks). 7- cpu sliding tray and back modesty will be made of powder coated crca sheet. colour: as per approval.8- 2 nos of exhaust fan will be provided for adequate heat management for each section.9- ventilation louvers will be provided on both front & rear modesty with air filters.10- retractable key board tray will be provided in each section. 11- cpu will be mounted on cpu sliding tray.12- hinges for the doors shall be provided. 13- earthing busbar will be provided. 14- cfl/led lamp will be provided for internal illumination. 15- per console 2 nos. 10 amp dp mcb (total 10 nos.) siemens/havells make complete with wiring and fitting will be provided. 16- per console 2 nos. 6 way pdu 5/15 power socket (total 10 nos.) complete with wiring and fitting will be provided. 17- per console 2 nos fan (total 10 nos.) rexnord make complete with wiring and fitting will be provided. 18- per console 2 nos toggle swich for fan (total 10 nos.) complete with wiring and fittings will be provided. 19- per console 2 nos, data socket (rj45) (total 10 nos.) d-link/legrand make complete with wiring and fitting will be provided, 20- per console 02 nos telephone socket (rj11) (total 10nos.) d-link/legrand make complete with wiring and fitting will be provided, 21- per console 1 nos keyboard tray (total 5 nos) ebco/innofit/harmoni make complete with all manner will be provided. 22- per consol 2 nos monitor arm (total10 nos) innofit/harmoni make complete with all manner will be provided. 23- looping will be provided for both type of power supply . all specification include the cost of all material , labour , t&p and other nessesary things required for proper completion of work. colour of lamination of table top , side , front ,back shutter and profile & frame is as per approved by e/i nsi (other important specification in annexure (1) attached as pdf), supply and fxing combind 4 user console desk size 4000mmx800mmx750mm, operator control desk will following features: 1- profile structure of operator desk will be of 3mm thick extruded aluminium with supporting crca top & bottom frame. colour: as per approval. 2- tabletop is made of 25mm mdf board. colour: as per approval 3- separate horz. cable routing wire baskets for power & data cables will be provided. 4- power distribution sockets (each user stations will be provided with 2 nos separate pdb units (1 for main & 1 for ups line) each pdb unit will have 6 points of 5/15a sockets with mcb. 5- 25mm mdf board side panels (fixed side panels). colour: as per approval. 6- 18mm mdf front & back modesty panel/shutter (openable with hinge and locks). 7- cpu sliding tray and back modesty will be made of powder coated crca sheet. colour: as per approval.8- 2 nos of exhaust fan will be provided for adequate heat management for each section.9- ventilation louvers will be provided on both front & rear modesty with air filters.10- retractable key board tray will be provided in each section. 11- cpu will be mounted on cpu sliding tray.12- hinges for the doors shall be provided.

CTN :40972900

18 Jul, 2025 10.00 Lacs

Ambasamudram - Tamil Nadu

Tender For supply of street lights materials for the year 2025-26 in manimutharu town panchayat - 4 feet flourescent tube light, 40w copper choke, 40w tube light starter, 36w / 40w tubelight electronic choke, tube light side lock holder, insluation gum tape roll - isi, 1/18 vir copper wire [1/44] [90mtr], 3/20 cts copper wire [3/36] [90mtr], 7/20 cts copper wire [7/34] [90mtr], 7/16 cts copper wire [7/67] [90mtr], 19/16 cts copper wire [19/51] [90mtr], 1.5 sq.mm 3 core copper cable, 2.5 sq.mm 3 core copper cable, 4 sq.mm 3 core copper cable, 6 sq.mm 3 core copper cable, 10 sq.mm 3 core copper cable, 16 sq.mm 3 core copper cable, 36w 4pin lamp holder, 36w lamp clip, 24w t5 holder, led fitting top protection glass - street light, led fitting top protection glass - flood light, 20 / 25 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 32 / 40 mm 1 no gi bend pipe, with 2nos of pole clamps with bolts and nuts, 6amps to 32 amps sp mcb, 40amps 2pole isolator, 63amps 4pole isolator, 32a d.p switch, mcb box, fuse unit 16 amps 240v, fuse unit 32 amps 415v, fuse unit 63 amps 415v, fuse unit 100 amps 415v (heavy duty), fuse unit 200 amps 415v (heavy duty), fuse unit 300 amps 415v (heavy duty), fuse unit 400 amps 415v (heavy duty), fuse unit 500 amps 415v (heavy duty), main switches spn 32 amps, main switches tpn 32 amps, main switches tpn 63 amps, main switches tpn 100 amps, main switches tpn 315 amps, 63a 4pmc changeover switch, 100a 4pmc changeover switch, automatic on/off street light timer switch with 24hrs 7 days programable digital timer clock, 40 amps 4 pole contactor with coil, mcb switch and connector fully wired with all accessories, street light meter/main box with wooden board, main switch, fuse carrier fully wired with all accessories, electronic 7 days 24 hrs programable ditial timer clock, 63 amps 4 pole contact with coil, 220v - 250v contactor coil, power capacitor, 9w led bulb, 15w led bulb, 30w led lamp, 24w t5 power saver lamp, 2x24w t5 power saver choke, 36w 4 pin non retrofit type cfl power saver lamp, 36w 4 pin non retrofit type cfl power saver choke, 20w high bright led 4 feet light, 20w led power saver street light fitting, 25w led power saver street light fitting, 30w led power saver street light fitting, 36w led power saver street light fitting, 50w led power saver street light fitting, 60w led power saver street light fitting, 80w led power saver street light fitting, 120w led power saver street light fitting, 150w led power saver street light fitting, 100w led power saver flood light fittings, 150w led power saver flood light fittings, 200w led power saver flood light fittings, 40w all-in-one solar led street light fittings, 60w all-in-one solar led street light fittings, 80w all-in-one solar led street light fittings, 18w to 25w led chip board, 30w to 36w led chip board, 45w to 60w led chip board, 72w to 90w led chip board, 120w to 200w led chip board, 18w to 25w led heavy duty electronic driver, 30w to 36w led heavy duty electronic driver, 45w to 60w led heavy duty electronic driver, 72w to 90w led heavy duty electronic driver, 120w to 200w led heavy duty electronic driver, 10 kv surge protector, 48` ceiling fan with all accessories, d.o.l motor starter up-to 10 hp, 10metre hot dip galvanised octogonal pole with round ring arm and 4nos of strong 5feet anchor bolts, templates, and nuts etc.. complete set, 1 hp to 10hp single phase control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 5 hp to 7.5hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., 10 hp to 25hp three phase fasd - auto-start / dry run protection control panel with contactor, relay, auto-start preventor, volt meter, amps meter, etc.. complete in a suitable powder coated enclosure., service charges automatic on/off stree

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830502

16 Jul, 2025 6.14 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

Central Government/Public Sector

CTN :40937607

28 Jul, 2025 7.42 Lacs

Tezpur - Assam

Tender For providing metering panel board for residential qtr. (type-ii/ block-ii), type-iii/block-i and ii), type-iv and type-iv (spl), laying of power cables from the main feeder of sub-station to electric control room, main control room to womens hostel

State Government

CTN :40907200

18 Jul, 2025 8.71 Lacs

Ernakulam - Kerala

Tender For replacement of obsolete mv panel boards at marine science campus, cusat

Central Government And Public Sector

CTN :40290231

04 Jul, 2025 NA

Surat - Gujarat

Tender For corrigendum : supply of swan make analytical instruments - make- swan item code- a-87.531.310 - photometer module for silica- v2 -version 2- , make- swan item code- a82.542.010 item description- 6-way valve module complete , make- swan item code- a-82.519.036 item descriptionsolenoid valve compatible for 2 wire , make- swan item code- a-82.519.031 item description- solenoid valve compatible for 3 wire , make- swan item code-a86.191.151 item description- tube 2.29 mm in frame for periclip pump , make- swan item code-a82214930 item description- revolver with rollers -5- for periclip with 3 channels , make- swan item code-a-86.191.891 item description- tubing kit reagent ami silica , make- swan item code-a-86.191.871 item description- tubing kit to suction lance- v2 -version-2- 150.00 , make- swan item code-a-82.811.021 item description- reagent filter , makeswan item code-a-85.142.400 item description- silica standard solution , make- swan item code-a-83.595.120 item description- outer tube with o-ring for flow cell , makeswan item code-silica reagents item description- 1 yr reagent set , make- swan item code-a-82.939.010 item description- sealing kit for reagent bottle , make- swan item code-a-85.141.400 item description- sodium standard solution 1000ppm in 100ml bottle , make- swan item codea-87.729.010 item description- etching kit for swansensor , make- swan item code-a-87.892.400 item descriptionelectrolyte for swansensor sodium reference- 100ml , make- swan item code-c-82.880.010 item description- air filter, 2 pcs. , make- swan item code-a-82.519.031 item description- solenoid valve compatible for 3 wire , makeswan item code-a-82.930.020 item description- calibration bottle pe, 1 liter -pe stands for material description- , make swan item code-a-83.590.041 item description- spare part set for ami sodium p -p stands for model description- , make- swan item code-a-86.170.031 item descriptiontubing kit for ami sodium p on single stream mounting panel -dimensions 280x850mm- , make- swan item code-a87.027.020 item description- swansensor nt5k 0.8m , make- swan item code-a-87.150.100 item descriptionswansensor ph fl - version ami sodium -fl stands for model description- , make- swan item code-a-87.720.010 item description- swansensor sodium screw plug , makeswan item code-a-87.840.100 item descriptionswansensor reference na , make- swan item code-a87.932.020 item description- swan bubble unit , makeswan item code-sodium reagents item description- one year reagent set , make- swan item code-e-10.603.910 item description- print ami v2.6 ac, main pcb for ami-2 transmitter , make- swan item code-e-10.668.710 item description- pcb amisod v1.x, electronic board -front endfor ami sodium a by p , make- swan item code-e11.135.830 item description- print ami microcon v3.x, pcb ami microcon , make- swan item code-a-82.250.100 item description- diffusion tubing hydrazine , make- swan item code-a-87.450.020 item description- hydrazine sensor pt by pt with rotor, bnc -pt by pt stands for temperature sensor description- , make- swan item code-a-87.850.100 item description- trides reference electrode screw plug , make- swan item code-a-87.931.040 item descriptionswansensor hall- d-7.5, 1m, sleeves , make- swan item code-a-83.555.070 item description- flow cell hydrazine , make- swan item code-a-86.170.050 item descriptiontubings from dipa bottle to overflow cell including adapters , make- swan item code-a-86.110.010 item descriptionwaste tubing, pvc, 20x15 mm, 2 meter , make- swan item code-a-86.130.010 item description- silicone tubing 9x6 mm by 3 meter , make- swan item code-a-83.591.030 item description- needle knob for flow control valve- 2 o-rings , make- swan item code-one year reagent set item description- one year reagent set , make- swan item code-a-83.590.030 item description- cleaning set , makeswan item code-e-10.603.910 item description- print ami v2.6 ac , make- swan item code-e-10.737.010 item description- pcb amihyd v1.x, elect

CTN :40539961

04 Jul, 2025 NA

Pithoragarh - Uttarakhand

Tender For bid to ras supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggrega

CTN :40540699

04 Jul, 2025 NA

Pithoragarh - Uttarakhand

Tender For bid to ras corrigendum : supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 ,

Mv Panel Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government And Public Sector