Latest nipples Tenders | Government nipples Tenders

Central Government/Public Sector

CTN :45473373

06 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of swinging link pin for connecting body to bogie to drg.no.aaa05092,alt 'a' and spec.no.is:5517-93,amendment 1 & 2 or latest 31 ni1o cr3 mo6 forged, mdts -166 rev.02 or latest and mdts 150 rev-nil or latest, along with swinging nut to drg. no. aaa05090, alt 'c'- 1 no. the firm shall fulfil the manufacturing facility as per rcf str mdst-155 or latest. [rcf p.l.no: 33500186 ] special condition : 1) threaded portions to be properly covered by corrugated paper of semicraft and 5 ply. 2) nut to be tied with screw as a set. 3) item to be stacked properly and packed in suitable steel pallet. 4) each pallet shall bestenciled or with rigidly fixed identification label. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45743779

03 Jul, 2026 NA

Jhajha - Bihar

Tender For supply of connecting lever assly. to m/s. escorts drg. no. 3kb 4325( consisting of 07 items) of m/s escorts make parking brake system of emus/memus, m/s escorts drg./pt.no. and qty. required per set are mentioned as follows;- (1) desc.- lever-m/s escorts drg./pt. no.-3 kb 4322-qty./set 1 no. (2) lever arm- 4 kb 4323-2 nos. (3) pin-4 kb 4324- 1 no. (4) link- 4 kb 4321-2 nos. (5) split pin 5x 32- is:549 -4 nos. (6) plain washer 22 is: 2016-6 nos. (7) pin -4 kb 4374-1 no. escorts drg. no. 3kb4325 spec:escorts drg.no. 3kb4325. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45743859

20 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of hand brake connecting link with bush (bg and mg) to drg. no. wa/bg-1190, alt.1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45561321

20 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For corrigendum : supply of hand brake connecting link with bush (bg and mg) to drg. no. wa/bg-1190, alt.1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45528036

04 Jul, 2026 1.75 Crore

Sagar - Madhya Pradesh

Tender For corrigendum : supply of flow nozzle assembly with root valves and nipples-457 x 29.3618inch, a182 f91, 1500 rtj , flow nozzle assembly with root valves and nipples-88.9 x 11.133inch, a182grf91, 1500 rtj , flow nozzle assembly with root valves and nipples-114.3 x 8.564inch, a105, 600 rf , flow nozzle assembly with root valves and nipples-60.3 x 5.542inch, a105, 600 rf , flow nozzle assembly with root valves and nipples-168.3 x 10.976inch, a105, 600 rf , bi-directional venturi with root valves and nipples-219.1 x 8.188inch, a105, 300 rf , integral flow orifice assembly with manifold- 33.4 x 4.551 , a105, 600 rf , integral flow orifice assembly with manifold-48.3 x 5.081.5 , a105, 300 rf , integral flow orifice assembly with manifold-48.3 x 5.081.5 , a105, 600 rf , flow orifice assembly with root valves and nipples-48.3 x 7.141.5inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples-60.3 x 5.542inches, a105, 300 rf , flow orifice assembly with root valves and nipples-88.9 x 11.133inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples-114.3 x 6.02 4inches, a105, 300 rf , flow orifice assembly with root valves and nipples-168.3 x 3.406inches, a182f304, 300 rf , flow orifice assembly with root valves and nipples-219.1 x 20.628inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples- 219.1 x 3.768inches, a182f304, 300 rf , flow orifice assembly with root valves and nipples-323.8 x 4.5712inches, a182f304, 300 rf , spare - blind plate suitable for 1inch 300 rf -for s.no.8 above , spare - blind plate suitable for 1.5inch 300 rf -for s.no.9 above , spare - blind plate suitable for 1.5inch 600 rf -for s.no.10 above , spare - blind plate suitable for 1.5inch 1500 rtj -for s.no.12 above , spare - blind plate suitable for 2inch 300 rf -for s.no.13 above , spare - blind plate suitable for 3inch 1500 rtj -for s.no.17 above , spare - blind plate suitable for 4inch 300 rf -for s.no.18 above , spare - blind plate suitable for 6inch 300 rf -for s.no.20 above , spare - blind plate suitable for 8inch 1500 rtj -for s.no.22 above , spare - blind plate suitable for 8inch 300 rf -for s.no.23 above , spare - blind plate suitable for 12inch 300 rf -for s.no.26 above , condensate chamber moc is a106grb class-3000, ibr , condensate chamber moc is a106grb class-6000, ibr , condensate chamber moc is a335p22 class-6000, ibr , condensate chamber moc is a335p91 class-6000, ibr

Central Government/Public Sector

CTN :45318042

03 Jul, 2026 NA

Koraput - Odisha

Tender For bid to ras bid to ras corrigendum : tender for supply of forming and machining 70 lines sheet metal components with hal material - stopper ring , adjusting washer , adjusting washer , bracket , flange , flange , flange , flange , flange , gasket , adapter , adapter , ribs , rib , rib , rib , fin , locking ring , gasket , gasket , screen , screen , screen , screen , screen , locking plate , net , bearing screen , bearing shield , gasket , gasket , gasket , net , gasket , gasket , gasket , conical net , gasket , gasket , net , bracket , packing , gasket , connecting link , ring , connecting link , ring , stand profile , bracket , bracket , bracket , bracket , gasket , net , flange , flange , tape , gasket , bracket , gasket , cover plate , plate , lock washer , gasket , fin , front wall , bracket , rib , bracket , base , cover plate , flange

CTN :45737625

30 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For hose connection for 3/4 inch bore in the length of 1100mm & 4 nos. of duplex nipples, (hose end fitting shall be one end fixed & other swivel type ) specification as per sae 100r 1, testcertificate for various test as per sae j343 shall be submitted along with supply. the house ends shall be provided with crimping suitable for high pressure confirming to that of house. the end fitting (male & female flareless type) shall be made from is-2062e250c, steel & shall be zinc electroplated to is:1573 grade-2, the manufactures identification marks and month and year of manufacture shall be suitable printed or engraved, end fittings and adaptor threads should confirm to is-554, used in icf bogie of 1400 hp demu/dpc [ warranty period: 30 months after the date of delivery ] ]

CTN :45715657

15 Jul, 2026 17.38 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For tender for supply of erection and fabrication work b c c - juice/water scale ke weight channel bed mein se gale/kamzor channel ko kaatkar hatana. poorvanusar naya banakar lagana evam trial dena. , juice weighing scale ke filling tank ke rods ki kamzor/gali guides ko naya banakar lagana. , juice. maceration water evam final molasses ke weighing scale tank ke gale/kamzor bottom cone ko kaatkar purane anusar naya bottom cone lagana va poorn trial dena. , juice weighing system ke measured juice receiving tank ki gali/kamzor bottom evam side plates ko kaatkar hatana evam nirdeshanusar purani/nai plate lagakar leak.proof trial dena. , raw juice pump par lage catcher ko kaatkar hatana tatha naya catcher fabricate kar yathasthan lagakar samast connection poorv ki bhanti karna evam leak.proof trial dena. , pan. quad body evam vapour line juice heaters ki hydraulic testing ke liye inlet evam outlet ke vapour pipes mein cutting karke plate ke blind weld karna tatha hydraulic uparant blind kaatkar hatana evam vapour pipe ko punah andar va bahar se leak.proof weld karna. , semi kestner. vapour cell. quad body juice heater. vapour line juice heater ke condensate bottles tatha syrup receiving bottles ke cells ko kaatkar ceiling baffle plate ke kamzor hisse. bottom plate ke kamzor hisse athva cell ke kamzor hisse ko badalkar condensate bottles/syrup receiving bottles ki vanchhit marammat kar jal bharav parikshan dena. , juice heater mein lage ayatakaar juice entry box ko dismantle karna. gale/kamzor charon nipples badalna. double beat valves ki fitting hetu dono flanges lagana. box ki marammat kar box fit karna evam double beat valve fit karke leak.proof parikshan dena. , sabhi juice heaters ki gali hui sampoorn partition plate ko kaatkar bahar nikalna va nai 8/10 mm plate lagakar gili hui ring ko leak.proof welding karna tatha lagi hui tubes ko bachakar santoshjanak trial dena. , juice heaters mein dono taraf partition plate ki kamzor m.s. strip ko dismantle karna. kate face par grinding kar nai 25 mm x 5 mm ki m.s. strip banakar lagana evam rubber fit karna. , juice sulphiter ke recovery tower ke gale/kamzor bottom cone ko kaatkar 10/12 mm moti m.s. plate se sample anusar naya cone fabricate kar yathasthan fit kar leak.proof welding karna. , juice sulphiter ke base ke charon side ke gale/kamzor horizontal beams ki vanchhit strengthening hetu unke andar 12 mm moti plate lagakar majbooti pradan karna. , juice/syrup sulphiter ke kamzor bottom cones evam top cones ko dismantle kar sample anusar naya banakar fit karna. tatha andar va bahar se leak.proof welding kar santoshjanak jal bharav evam trial dena. , syrup sulphiter ke tower ki gali/kamzor baffle plates/jaliyon ko bahar nikalna. vanchhit marammat kar yathasthan fit kar leak.proof trial dena. , syrup pump se syrup sulphiter tak dono pumps ki delivery ki dono lines ko neeche utarkar garam karke. bhali bhanti safai karna. gali hui pipe line badalkar valve. bend. nipple ityadi lagakar punah lines ko fit karna evam leak.proof trial dena. , syrup/juice sulphiter ke upar lage recovery tower ko utarkar gali shell ko nirdeshanusar nai/purani plate se shell taiyar kar fit karna evam tower ko punah yathasthan lagakar leak.proof trial dena. , juice/syrup sulphiter/clarifier ke kamzor shell ke kamzor bhag ko kaatkar hatana. nirdeshanusar nai/purani 10/12 mm plate se banakar yathasthan lagakar andar va bahar se leak.proof welding kar trial dena. , sulphur bhatti (juice/syrup) ke gale/kamzor secondary gas cooler ko kaatkar hatana. 10/12 mm moti plate se purane ke anusar naya cooler fabricate kar yathasthan fit kar samast connection poorv ki bhanti kar leak.proof gas trial dena. , sulphur bhatti station par juice/syrup hetu sthapit sulphur bhattiyon ke gas coolers ke gale/kamzor cooling pipes ko kaatkar hatana. purane anusar naye pipes taiyar kar poorv ki bhanti fit kar leak.proof trial dena. , sulphur bhattiyon ke gale gas headers ko kaatkar hatana. purane anusar naye headers taiyar kar lagana. , sulphu

CTN :45717001

13 Jul, 2026 5.61 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.

CTN :45716565

13 Jul, 2026 1.08 Lacs

Bulandshahr - Uttar Pradesh

Tender For tender for supply of spare for stitching machin -looper drive liver assembly for stitching machine model no 80000 dx , shaft for looper rocker stud for stitching machine model no 80000 dx , needle lever ball link for stitching machine model no 80000 dx , feed lift camp with block for stitching machine model no 80000 dx , lopper stand complete holder for stitching machine model no 80000 dx , looper for stitching machine model no 80000 dx , screw set for stitching machine model no 80000 dx , arm shaft for stitching machine model no 80000 dx , bush set for stitching machine model no 80000 dx , connecting stud complete for stitching machine model no 80000 dx , pressure foot assembly for stitching machine model no 80000 dx , crank for feed shaft connection for stitching machine model no 80000 dx , thread tension assembly for stitching machine model no 80000 dx , rocker for looper drive lever shaft for stitching machine model no 80000 dx , looper bar crank rod assembly for stitching machine model no 80000 dx , main crank shaft assembly for stitching machine model no 80000 dx , needle lever assembly for stitching machine model no 80000 dx , needle bar stud connection assembly for stitching machine model no 80000 dx , main housing with bearing for stitching machine model no 80000 dx , liver for looper drive ecc for stitching machine model no 80000 dx , assembly for needle liver bar for stitching machine model no 80000 dx , return roller for slate conveyer , return roller with shaft for slate conveyer , counter sunk screw complete 1/4 inch x 1 1/2 inch , slate complete for slate conveyer , return roller shaft with coller , throat plate for stitching machine model no 80000 dx

Nipples Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector