Latest nipples Tenders | Government nipples Tenders

CTN :44925811

18 Jun, 2026 NA

Nagpur - Maharashtra

Tender For bid to ras corrigendum : supply of lpg work e e - sitc of lpg cylinder adaptors , sitc of gi lpg pipeline installation , sitc of suraksha lpg hose , sitc of gas pressure gauge , sitc of non return valve , sitc of gi ball valves , sitc of three burner stove , sitc of lpg regulator , sitc of cylinder manifold cage , sitc of flexible ss pigtails , sitc of sitc of manifold header pipe , sitc of sitc of cylinder connecting nipples , sitc of pilot line with isolation valve , sitc of gas flow meter optional , sitc of exhaust fan , sitc of auto-clean chimney , sitc of inline duct fan , sitc of exhaust fan louver , sitc of gi ducting , scaffolding , four number ms steel table top finished by granite stone ) /bid number : gem/2026/b/7447123 * /dated: 17-04-2026 & & / bid document 1 / 24

Central Government/Public Sector

CTN :45528036

22 Jun, 2026 1.75 Crore

Sagar - Madhya Pradesh

Tender For supply of flow nozzle assembly with root valves and nipples-457 x 29.3618inch, a182 f91, 1500 rtj , flow nozzle assembly with root valves and nipples-88.9 x 11.133inch, a182grf91, 1500 rtj , flow nozzle assembly with root valves and nipples-114.3 x 8.564inch, a105, 600 rf , flow nozzle assembly with root valves and nipples-60.3 x 5.542inch, a105, 600 rf , flow nozzle assembly with root valves and nipples-168.3 x 10.976inch, a105, 600 rf , bi-directional venturi with root valves and nipples-219.1 x 8.188inch, a105, 300 rf , integral flow orifice assembly with manifold- 33.4 x 4.551 , a105, 600 rf , integral flow orifice assembly with manifold-48.3 x 5.081.5 , a105, 300 rf , integral flow orifice assembly with manifold-48.3 x 5.081.5 , a105, 600 rf , flow orifice assembly with root valves and nipples-48.3 x 7.141.5inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples-60.3 x 5.542inches, a105, 300 rf , flow orifice assembly with root valves and nipples-88.9 x 11.133inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples-114.3 x 6.02 4inches, a105, 300 rf , flow orifice assembly with root valves and nipples-168.3 x 3.406inches, a182f304, 300 rf , flow orifice assembly with root valves and nipples-219.1 x 20.628inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples- 219.1 x 3.768inches, a182f304, 300 rf , flow orifice assembly with root valves and nipples-323.8 x 4.5712inches, a182f304, 300 rf , spare - blind plate suitable for 1inch 300 rf -for s.no.8 above , spare - blind plate suitable for 1.5inch 300 rf -for s.no.9 above , spare - blind plate suitable for 1.5inch 600 rf -for s.no.10 above , spare - blind plate suitable for 1.5inch 1500 rtj -for s.no.12 above , spare - blind plate suitable for 2inch 300 rf -for s.no.13 above , spare - blind plate suitable for 3inch 1500 rtj -for s.no.17 above , spare - blind plate suitable for 4inch 300 rf -for s.no.18 above , spare - blind plate suitable for 6inch 300 rf -for s.no.20 above , spare - blind plate suitable for 8inch 1500 rtj -for s.no.22 above , spare - blind plate suitable for 8inch 300 rf -for s.no.23 above , spare - blind plate suitable for 12inch 300 rf -for s.no.26 above , condensate chamber moc is a106grb class-3000, ibr , condensate chamber moc is a106grb class-6000, ibr , condensate chamber moc is a335p22 class-6000, ibr , condensate chamber moc is a335p91 class-6000, ibr

State Government

CTN :45561678

22 Jun, 2026 1.80 Lacs

Ajmer - Rajasthan

Tender For rate contract for senetry items -0 brass (bibi cock 450 grams) , brass puss coke half inch , pvc ball coke set , pvc hair , pvc coke washer , half ton wasser , gi socket half inch , g.i. elbow half inch , gi peatwall half inch , gi nipple half inch / one inch , gi socket half inch , g.i. elba 1 inch , g.i. pete wall 1 inch , gi pin half inch , g.i. 1 inch , gi pipe half an inch per foot , gi pipe 1 inch per foot , gi pipe 2 inch , gi pipe 2.5 inch , union half inch , union 1 inch , cp sort body half inch , cp people body half inch , handle wall half inch , handle one inch , handle two inches , wheel wall half inch , wheel wall two inches , body face half inch , pilar cock half inch , surgical tape half inch , vase vesin 12" , vase vesin 18" , vase vesin 24" , cyston belt , angle stop cock half inch , t half inch , t one inch , t one and a half inches , perky nipples half inch / one inch , reducer one to half inch , reducer two to two and a half inches , reducer two to one and a half inches , reducer two to one inch , footwall two inches , footwall two and a half inches , union two inches , union two and a half inches , socket two inches , socket two and a half inches , nipple two inches one fit , nipple two and a half inches one fit , elbow one to half inch , band two inches , band two and a half inches

CTN :45576040

06 Jul, 2026 NA

Bokaro - Jharkhand

Tender For supply , installation , testing and commissioning of hydraulic oil injector pump complete suitable to build up hydraulic pressure up to 4000bar. each set consisting of following items: (1) oil injection pump pressure capacity 4000kg/sq.cm (2) pump bracket and special floor stand (3) feeder bottle and handle (4) high pressure tubing capacity 4000bar length 3 meter (5) adopter nipples (6) pressure gauge(0-4000bar)(7) carry case. make: precision, bega, gm industries, skf, fag. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45576232

13 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of set of barrel nipples for plumbing work as per drg. no. crw/sk-326 alt. 6, item no. 1 to 8 (quantity in one set=77 nos.). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45547144

06 Jul, 2026 NA

Liluah - West Bengal

Tender For supply set of hydrant valve consists of 1. forged brass valve of 1 inch size- 1 no. (specification: body, bonnet, ball, stemconfirming to forged brass is 6912 gr. flb and premium quality ptfe gland packing/seating2. gi nipple2x6 inch -1 no 3. gi reducer 2x1 inch-1 no. 4. gi nipple 1x3 inch -1 no.5. gi nipple 1x6 inch - 1 no. 6. gi bend 1x6 inch-1 no gi nipples of galvanized is 1239 pipe with bsp threads. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45306043

20 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di

Central Government/Public Sector

CTN :45492965

01 Jul, 2026 NA

Duliajan - Assam

Tender For tender for supply of pipe fittings nipples tees wing unions unions and stud bolt - nipple swadge npt size two inch x one inch x six and half inch , nipple swadge apilp size half inch x one fourth inch x three and half inch , tee equal 300 psi npt size half inch , tee equal 300 psi npt size one inch , tee equal fcs 3000 psi size four inch , union female 300 psi size one fourth inch , union wing mic four inch x 1000 psi , union wing rigid type four inch x 6000 psi , union hex black 700 psi size one fourth inch , union galvd bstpt 700 psi size one inch , bolt stud alloy steel f thd half inch x two and half inch

Central Government/Public Sector

CTN :44846184

12 Jun, 2026 6.69 Lacs

Gaya - Bihar

Tender For bid to ras supply of fire fighting equipments d d - dcp type fire extinguisher capacity 6 kg , fire hose cabinet , 25mm dia gunmetel gate valve , 25mm air release valve , 80mm dia butterfly valve , butterfly valve 100 mm , swinging type hose reel , 25mm dia gun metal globe valve and nozzle , 3 mm thick rubber gasket , 25mm dia socket union nipples lumpsum , 15mm dia ms socket and teflon tape lumpsum , single head stainless steel hydrant valve , packing gaskets , industrial type pressure gauges with gun metal or brass valves , adjustable rosette plate for 15mm dia powder coated , 80mm dia non return valve , 100mm dia non return valve , 68 degree centigrade upright sprinkler , 68 degree centigrade pendant sprinkler , 1000mm flexible drop , 1200mm flexible drop , 1500mm flexible drop , 150mm dia butterfly valve , paint

State Government

CTN :45455583

29 Jun, 2026 NA

Multi City - Gujarat

Tender For se 2322: supply for various size of upvc, gi and steel pipes, fittings and consumable of plumbing material for civil maintenance dept. on as and when requirement basis at gsecl,sshep, ekta nagar - upvc sch40 for cold water pipe 25 mm dia 1, teflon tap crown ,champion make or equivalent 10mtr, wash basin supply pipe with end socket, waste coupling for wash basin, upvc sch40 for cold water pipe 15 mm dia one half, wc seat cover, waste pipe for sink & urinal, upvc coupling one half and 1 heavy duty, upvc elbow one half and 1 heavy duty, upvc tee one half and 1 heavy duty, upvc mta one half and 1, upvc union one half and 1, upvc coupling with one side thread one half and 1, bib cock one half, stop cock male threads one half, pillar cock one half, end cap one half, upvc reducer 1,one half, swr pipes is 13592 for drain 110mm dia, g.i. socket steel coupling one half, heavy duty, g.i. socket steel coupling 1, heavy duty, union joint socket steel for 1, union joint socket steel for one half, g.i. elbow equal steel pipe fittings one half and 1, g.i. tee equal steel pipe fittings one half and 1, floor drain traps having round shape and made up of ms sheet with chrome polish, connection pipe with nut pvc metal braided pipe connection pipe with nuts, 15 mm angle stop valve conforming to is8931, latest, 15 mm bib taps conforming to is8931,latest, 15 mm piller tap conforming to is8931,latest, 1 inch and one half inch nominal size carbon steel screwed end, general purpose ball valve, one half inch hot finished seamless ,hfs barrel nipples steel pipes fitting, hot-finished seamless, hfs plug steel pipes fitting for one half and 1 inch

Nipples Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government