Latest non return valves Tenders | Government non return valves Tenders

State Government

CTN :45732621

02 Jul, 2026 47.2 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - fixing of c.i. valves hydrants, fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (non return) valves

State Government

CTN :45732637

02 Jul, 2026 49.2 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (non return)valves, l filter media providing, lowering, laying in trenches, aligning, fixing in position and jointing, na ci/ductile iron pipes and specials providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron.

CTN :45609248

06 Jul, 2026 NA

Medchal-T - Telangana

Tender For corrigendum : 1-1/2" inch lpg control valve without actuator , 3/4" inch pilot lpg regulator inlet pressure 7 psi max outlet pressure range 18 to 40 mbar , 1/2" inch pressure balance ratio regulator for lpg service , uv sensor for lpg burner flame detection , dn40 main gas regulator for lpg service 5 bar max inlet pressure outlet pressure range 85-180 mbar , ignition electrode for heater , pilot burner without ignition rod , 1-1/2 inch solenoid valve normally closed auto reset fofc with cpi switch for lpg service 240 volts , dn25 pressure relief valve for lpg service

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45419346

01 Jul, 2026 NA

Purnia - Bihar

Tender For bid to ras bid to ras supply of safety items at purnea lpg plant c c - windsocks doublelinen clothwater proof , hand glove lowtemperature rbr 30 degr , handgloves pvc 18inyellow , cotton handgloves , goggles panoramic view chemicalsplash , goggle protective uv protection , gogglesud 50 antifog , goggles uee132wg arc welding , goggles gascutting , ear plugrbr , earmuff universalsoundlevel 135dba , safety shoes , safety toe guard , safetyhelmet hdpe , face shield and safetyhelmet , n95 mask reusable , barricadingtape 2mmx3in , trafficcone conical pu , safetybelt harness polyamide manufactur , blanket water gel , spark arrestorsize 6in , spark arrestorsize 3in , spark arrestorsize 2in , spark arrestorsize 4in , tester breathalcoholmodel 701d victory , hhmd , flp led withenclosure torchvolt 1 point 5v , co2 gas cartridgefor dcp 9 kg fireexti , co2 cartridge for75kg fireextinguisher , inspectionmirror steelsize 610 x 305mm , jet nozzle ss 63mm , universalmultipurposenozzle gunmetal s , vlv sol norgrensingle pilot 5 by 2 , quartz bulbss range 79degc 1 by2 in , nozzle sprinkler size 1 by 2indifferent t , supply of flp esdpush buttons , flp break glassunit , sply of pressureswitch 010 kg flp , sply of pressureswitch 010 kg nonflp , sply of pressureswitch 030 kg , relayvalve 81 point 521166079refueller , siren handoperatedrange 1 point 6km , electrical sirenmin 3 km kirag , sply of lock key , champion gasket , co2 fireextinguisher hosewith handle , dcp fireextinguisher hose , double headhydrant malehosing coupler , fire hydrant linestrainer 6 inch diawi , fire hydrant linestrainer 10 inchdia w , fire extinguisherlock pin , half inch fitting withnipple both side , dcp fireextinguisherpowder , handpump for hsdlifting , enamel paint redsea green lightblue , double endedopen wrench set8x9 to 30x3 , adjustablewrench 36x300 mm , cs ball valve size15 mm , pressure guagedia 100 mm 40 kgss , pressure guagedia 150 mm 30 kgss , pressure guagedia 150 mm 16 kgss , pressure guagedia 50 mm 42 kgss , pressure guagedia 50 mm 16 kgss g , pressure guagedia 100 mm 21 kg ss , pressure guagedia 50 mm 150 kgss , m s pipe size halfinch , m s pipe size 25 mm , ms elbow size halfinch , m s elbow size 25mm , ss float valvesize 50 mm withball , c s gate valve size25 mm , reducer size 25 x15 mm , d e open wrench non sparking 24x26 al br , d e ring wrench non sparking 21x23 al br , d e ring wrench non sparking 24x26 al br , safetyrespiratory face mask single ca , double endedopen wrench set24x27 ss , double ended ringwrench set 24x27ss , double endedopen wrench set14x15 ss , double ended ringwrench set 14x15ss , double endedopen wrench set18x19 ss , double ended ringwrench set 18x19ss , double endedopen wrench set20x22 ss , double ended ringwrench set 20x22ss , allen key set witht shaped holder chrom

State Government

CTN :45705842

30 Jun, 2026 NA

Pinjore - Haryana

Tender For fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 1. 80 mm i/d, fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 2. 100 mm i/d ,fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 2. 100 mm i/d ,ilter media providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45704170

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45702947

30 Jun, 2026 NA

Rohtak - Haryana

Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 development of tube well according to clause 9.3 of is: 2800-1991 (part-i) as amended up to date and specifications attached and as directed by the engineer-in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required for the work. 1. compressor 450cfm x 250 psi , installation of shallow/medium/deep tubewells as per is 2800:1991 electric logging of tube well. , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 2. 15 hp motor

Central Government / Public Sector

CTN :45500142

03 Jul, 2026 NA

Secunderabad - Telangana

Tender For corrigendum : supply of swing check type reflux (non-return] valves for water work purpose - is 5312 (q3)

Central Government/Public Sector

CTN :45692570

06 Jul, 2026 5.00 Lacs

Dhubri - Assam

Tender For supply of items related to repairing and maintenance of ac on rate contract basis - pcb board out doorunit, pcb board indoor unit, out door stand, out door fan motor, indoor blower motor, coper pipe, coper pipe, remote, battery, 3pintop, pipe insulation foam tubing, air conditioner heat insulationtube,polyethylene foamtubeclosedcell retardant, pipe insulation foam tubing, air conditioner heat insulationtube,polyethylene foam tube closed cell retardant, rollingtape, 4corewire, gasr-22, gasr-32, gasr-410, compressor, compressor, compressor, sensor, sensor, ambient sensor, sensor, refrigerant leak detector, fastener nut bolt, whitecement, butanegas/lpg, coper brazing rod, capasitor, capasitor, capasitor, copernut, digitalclamp multimeter, noseplier, combinationplier, screw driver, adjustable wrench, adjustable wrench, l-key, minigas welding machine, lpg brazingtorch, swaging tool, tubecutter, tube bender, measuring tap, hummer, hummer, flashlight/hand lamp, core removetool, flaring tool kit, drillbit, charginghoser410ar32 r404a r134a, refrigerant gas chargingpipe, r-22 valve, thread seal, scale level, drill machine, tools box, tool bag

Non Return Valves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government / Public Sector

Central Government/Public Sector