Get complete information related to latest Non Return Valves Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Non Return Valves Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Non Return Valves Tenders.
Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - fixing of c.i. valves hydrants, fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (nonreturn) valves
Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (nonreturn)valves, l filter media providing, lowering, laying in trenches, aligning, fixing in position and jointing, na ci/ductile iron pipes and specials providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron.
Tender For supply of spares of m/s elgi make air compressor model no. 132-8.0 against ssp-81 - maintenance kit 4000 hr, part no 412400929, maintenance kit 16000 hr, part no 412400940, o-ring tube bundle, part no b011307100005, gasket moisture separator, part no 415400434, gasket - mist separator, part no 413400481, o ring, part no 415400656, o ring, part no 990402910, mesh moisture separator, part no b000308380005/ old part no - 413400478, o-ring moisture separator, part no 415401498, rubber elbow ow2, part no 415305938, air filter eg200-250, part no b004700770037, ccva assy ss ow2, part no a410677, air oil separator spinon, part no b006700770010, o-ring id32.9 x 3.5, part no 015402685, o-ring id45.0 x 3.0, part no 035400047, separator hsg assy.,part no 015321611, mesh separator d75 x 80, part no 015404543, elbow connector-g1/4, part no 415401516, elbow connector-g1/2, part no 015403848, 1/4 bsp bonded sealwasher, part no 000959385, 3/8 bsp bonded sealwasher, part no 000959386, 1/2 bsp bonded sealwasher, part no 000959387, valve assy air vent nh1x, part no 41041x022, nylon tube 12x10mm white , part no 000919253, manifold solenoid valve, part no 415302072, oil filter element-75 lpm, part no x017503, kit auto drain valve ad-5, part no b001303900006, grease unirex , part no 015404151, pressure transmitter -1 to 1 bar, part no 018364572, pressure transmitter -1 to 3 bar, part no 018364573, pressure transmitter 0-6 bar, part no 008979018, pressure transmitter -1 to 6 bar, part no 00897902r, temp transmitter (0-150 c), part no 018400478, temp transmitter (0-300 c), part no 018400479, neuron -iv controller plc, part no 018364634, item wise boq
Tender For supply of spares of m/s elgi make air compressor model no. 132-8.0 against ssp-81- maintenance kit 4000 hr, part no 412400929 , maintenance kit 16000 hr, part no 412400940 , , o-ring tube bundle, part no b011307100005 , , gasket moisture separator, part no 415400434 , , gasket - mist separator, part no 413400481 , , o ring, part no 415400656 , , o ring, part no 990402910 , , mesh moisture separator, part no b000308380005/ old part no -413400478 , , o-ring moisture separator, part no 415401498 , , rubber elbow ow2, part no 415305938 , , air filter eg200-250, part no b004700770037 , , ccva assy ss ow2, part no a410677 , , air oil separator spinon, part no. b006700770010 , , o-ring id32.9 x 3.5, part no 015402685 , , o-ring id45.0 x 3.0, part no 035400047 , , separator hsg assy.,part no 015321611 , , mesh separator d75 x 80, part no 015404543 , , elbow connector-g1/4", part no 415401516 , , elbow connector-g1/2", part no 015403848 , , 1/4 bsp bonded sea washer, part no 000959385 , , 3/8 bsp bonded sea washer, part no 000959386 , , 1/2 bsp bonded sealwasher, part no 000959387 , , valve assy air vent nh1x, part no 41041x022 , , nylon tube 12x10mm white, part no 000919253 , , manifold solenoid valve, part no 415302072 , , oil filter element-75 lpm, part no x017503 , , kit auto drain valve ad-5, part no b001303900006 , , grease unirex, part no 015404151 , , pressure transmitter 1 to 1 bar, part no 018364572 , , pressure transmitter -1 to 3 bar, part no 018364573 , , pressure transmitter 0-6 bar, part no 008979018 , , pressure transmitter -1 to 6 bar, part no 00897902r , , temp transmitter (0-150 °c), part no 018400478 , , temp transmitter (0-300 °c), part no 018400479 , , neuron iv controller plc, part no 018364634
Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (nonreturn) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 development of tube well according to clause 9.3 of is: 2800-1991 (part-i) as amended up to date and specifications attached and as directed by the engineer-in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required for the work. 1. compressor 450cfm x 250 psi , installation of shallow/medium/deep tubewells as per is 2800:1991 electric logging of tube well. , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 2. 15 hp motor
Tender For fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 1. 80 mm i/d, fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 2. 100 mm i/d ,fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (nonreturn) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 2. 100 mm i/d ,ilter media providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm
Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (nonreturn) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm
Tender For corrigendum : procurement of trident pneumatics make auto drain valve spares for ahp - coil,trident,solenoid valve,edv-hd-11, timer w/ coil,ad1625,trident,edv-x-hd11, maintenance kit,edv-x-hd11-a,edv-x-hd1-1