Latest on load tap changer Tenders | Government on load tap changer Tenders

CTN :45505510

15 Jul, 2026 81.75 Lacs

Mehsana - Gujarat

Tender For corrigendum : research based pilot project [dynamic feeder voltage manager (dfvm)] for turnkey based work of design, development, supply, installation, testing & commissioning of 3-ph, 50 hz, 4000 kva, 12/12kv outdoor onan auto/power transformers equipped with on-load tap changer (oltc) with necessary infrastructure and protections, master controller and around 100 modems, control circuits with comprehensive maintenance contract for 05 (five years) after handing over the project

Central Government/Public Sector

CTN :45702784

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond & u/s 16 pins relays plug in type of various makes, sorts & sizes in full/part / broken in as is where is condition. pl no 98981560 note: 1) removal of plastic attachments are not permitted. 2) segregation is not permitted. location: inside new rsg ward bin v .

Central Government/Public Sector

CTN :45698581

20 Jul, 2026 NA

Sonpur - Bihar

Tender For supply of 21.6/30.24 mva, 132/27 kv, traction power transformer, onan/onaf with on load tap changer, 50 hz, single phase as per rdso specification no. ti/spc/psi/trnpwr 3201 with a and c -1, str: ti-str-014 rev-06 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45644778

20 Jul, 2026 NA

Sonpur - Bihar

Tender For corrigendum : supply of 21.6/30.24 mva, 132/27 kv, traction power transformer, onan/onaf with on load tap changer, 50 hz, single phase as per rdso specification no. ti/spc/psi/trnpwr 3201 with a and c -1, str: ti-str-014 rev-06 [ warranty period: 30 months after the date of delivery ] ]

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

CTN :45675374

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 1 control terminal block 16 mm 03 nos. 2 hp/lp cut out 05 nos. 3 scrap scroll compressor 10 nos. 4 scrap blower motor, 1.5 hp, 1400 rpm with top 18 nos. 5 scrap condenser fan motor, 1 hp, 1400 rpm with top 18 nos. 6 ss welded round guard 03 nos. 7 dryer filter (1.5¿ solder type) 29 nos. 8 hartige ( coupler) connector 24 pin 46 nos. 9 hartige ( coupler) connector 16 pin 20 nos. 10 dumper actuator 5 nos. 11 male female plug and socket for dumper actuator 5 nos. 12 pressure transmitter ( 0-10 bar) 20 nos. 13 pressure transmitter ( 0-40 bar) 26 nos. 14 glass bulb cartridge 130 degree 59 nos. 15 scrap esti switch assembly with cartridge 9 nos. 16 air heater set consisting 400 watt ( 15 nos.) coil with insulated backelite sheet 3 nos. 17 scrap low pressure control switch (auto reset) 38 nos. 18 scrap high pressure control switch (auto reset) 50 nos. 19 scrap control pressure switch (auto reset) 24 nos. 20 expansion valve 22 nos. 21 hp gauge (0-40 bar) 13 no. 22 lp gauge (0-10 bar) 13 no. 23 set point generator switch 5 nos. 24 top cover (part-i inside) 4 nos. 25 hygrostat 35-100% 8 nos. 26 scrap compressor contactor -type ls-1 bk 00 dc 110 volt 44 nos. 27 scrap condenser motor contactor -type 1.54k10e dc 110 volt 37 nos. 28 scrap blower motor contactor -type 1.54k10b dc 110 volt 27 nos. 29 dc-dc converter for flapper motor, 110 v/24 v , 1.5 amp 3 nos. 30 bottom cover (part-i inside) 4 nos. 31 electronic controller (srmc-20) 5 nos. 32 top cover (part-ii inside) 4 nos. 33 multifunctional monitoring relay, 750 volt 33 nos. 34 scrap dc-dc converter , 110 v/24 v, 20 amp/1.5 amp 20 nos. 35 return filter, fresh air cassette filter 73 nos. 36 scrap bush bearing clutch plate, commutator, carbon brush holder including carbon 4 nos. 37 bottom cover (part-ii outside) 4 nos. 38 b-check kit for dg 14 set 39 solenoid switch of self-starter 2 nos. total ferrous - 958 kg total copper - 71 kg

corporations/Associations/Others

CTN :45668361

29 Jun, 2026 NA

Multi City - Multi State

Tender For auction sale of canvas old,steel scrap,textile old,mss,mt scrap,eng assy etc.,helmet,steel scrap (ramp loading, mine plug),tarpauline old,fire ect o/s etc.,cover water proof,fire ext o/s etc.,fire ext 50 kgs,tarpauline o/s,blanket o/s etc.

corporations/Associations/Others

CTN :45648184

13 Jul, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For providing of operation and maintenance power house / power plant - carried out in connection with complete overhaulingof 15mva, 15.75/6.9kv uat-10a & 10b along with on load tap changer of 200mw unit no.10

Central Government/Public Sector

CTN :45265749

29 Jun, 2026 NA

Sonpur - Bihar

Tender For corrigendum : supply of 21.6/30.24 mva, 132/27 kv, traction power transformer, onan/onaf with on load tap changer, 50 hz, single phase as per rdso specification no. ti/spc/psi/trnpwr 3201 with a and c -1, str: ti-str-014 rev-06 [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45612116

22 Jun, 2026 NA

Multi City - Multi State

Tender For auction sale of bty 12v 180/200 ah etc.,canvas old,steel scrap,steel scrap (track link),textile old,mss,mfm,mt scrap,csa,washing plant,eng assy etc.,helmet,steel scrap (ramp loading, mine plug),tarpauline old,fire ect o/s etc.,cover water proof,fire ext o/s etc.,fire ext 50 kgs,tarpauline o/s,blanket o/s etc.

On Load Tap Changer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others