Latest organic solvent Tenders | Government organic solvent Tenders

CTN :45672529

10 Jul, 2026 1.50 Lacs

Sultanpur - Uttar Pradesh

Tender For supply of lab chemical d d - basic lead sub acetate , organic solvent , bromo thymol blue powder , conc sulphuric acid , conc hydrochloric acid , sodium hydroxide , phosphoric acid , potasium per magnet , dextrose glucose pure , commercial hydrochloric acid , brix hydrometer 0 bata 10 , brix hydrometer 10 bata 20 , tharmameter 0 bata 120 centrigrate , universal indicator bata 500 ml , thymol blue bata 100 ml , buffer solution 500 ml , fehling a solution 500 ml , fehling b solution 500 ml , p h indicator paper , electronic weighing scale 500 gram , beaker 100 ml , conical flask 250 ml , test tube small , test tube big , test tube stand , plastic bucket 7 point 5 ltr , filter paper 18 point 5 cm q , knife of rapipol extractor per set , wattman filter paper 46x57 , alumnium mug 250 ml , plastic bata steel small dise , oven , muricuric chloride , plastic cylinder 100 ml , plastic cylinder 500 ml , plastic cylinder 1000 ml , meashuring flask 250 ml

CTN :45354346

23 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of establishment of watermanship training centre including electrrical engineer equipment - 1.1. modular construction, easy/ fast installation/ anti-skid surface/ uv protected/ more stable/ excellent buoyancy. 1.2. dimensions-8ft x 6.5ft x 1.5ft (length x width x height). 1.3. buoyancy-1000 kg. 1.4. railings- ms railings epoxy coated with nut and bolts. 2.1 hand held fire extinguisher (2 nos). 2.2. obm 90 hp suzuki outboard motor with accessories (fuel tank, steering remote system propeller, toolkit) & manufacture recommended list of spares (mrls). 3.1. dimensions-4.7m x 2.1m x 0.50m (length x width x buoyancy dia), 05 x chambers and 08 x person capacity. 3.2. hull construction fiberglass, u.v. resistance gelcoat, epoxy resin with vacuum infusion system and sandwich core material. 3.3. engine-90hp 4 stroke remote control engine with steering system. 3.4. accessories - pair of oars, foot pump (electric & manual), repair kit. 4.1. open covered mechanical storage shed (30 ft x 40 ft x 15ft). 4.2. profile sheet 40x30, iron pipe 3x3 inch, parlin 2x2 inch, brick wall 100ftx36inch and 08 x tube light. 5.1. rcc ramp 4m wide x 12m long, rcc pilar 12x12 inch, steell rat 18mm and 12mm. 5.2. reinforced concrete (m25) with non-slip finish. 5.3. ramp rcc thickness 6 inch

CTN :45384469

16 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For purchase of chemicals - purchase of chemicals, diluent for dna extractionsize 500mla diluent used in dna extraction is typically te buffer (10 mm tris-hcl, 1 mm edta, ph ~8.0) or nuclease-free water, used to dissolve and dilute extracted dna. tris maintains a stable ph, while edta chelates divalent cations (e.g., mg ), thereby inhibiting dnase activity and protecting dna from degradation. the diluent must be sterile and free of nucleases to ensure the integrity of dna for downstream applications such as pcr, sequencing, and cloning., luria bertani mediumsize 500gluria bertani medium is a nutrient-rich growth medium commonly used for culturing bacteria such as escherichia coli and agrobacterium tumefaciens. it contains tryptone (10 g/l), yeast extract (5 g/l), and sodium chloride (10 g/l), which provide essential nutrients, vitamins, and osmotic balance for bacterial growth. lb medium supports rapid cell growth and is widely used in molecular biology for cloning, plasmid propagation, and transformation experiments. for solid media, agar (15g/l) is added., chloroform (high analytical reagent grade) size 2.5lchloroform (high analytical reagent grade) is a high-purity organic solvent used in dna extraction, particularly in phenol chloroform methods, to separate proteins and other contaminants from nucleic acids. it enhances phase separation by forming a distinct organic layer, allowing dna to remain in the aqueous phase. due to its toxicity and volatility, it must be handled under a fume hood with proper safety precautions., depcsize 25mldepc is a chemical used to inactivate rnases in water and laboratory solutions, making them suitable for rna work. it modifies histidine residues in proteins, thereby deactivating rnase enzymes that can degrade rna. depc-treated solutions are typically incubated and then autoclaved to remove residual depc, ensuring they are safe for use in downstream applications such as rna extraction and cdna synthesis., tb green master mixsize 200rnxtb green master mix is a ready-to-use reagent used in real-time pcr (qpcr) for dna amplification and detection. it contains tb green dye (a double-stranded dna-binding fluorescent dye), dna polymerase, dntps, mg , and reaction buffer. the dye binds to amplified double-stranded dna and emits fluorescence, allowing real-time monitoring of pcr amplification. it is commonly used for gene expression analysis and quantification of dna., dna loading dyesize 10 inchdna loading dye is a solution added to dna samples before agarose gel electrophoresis. it contains tracking dyes (such as bromophenol blue and xylene cyanol) that allow monitoring of dna migration during the run, and a dense agent (such as glycerol or sucrose) that helps the sample sink into the wells. it may also include edta to protect dna from nuclease degradation., metaloopa metal loop is a reusable laboratory tool made of platinum or nichrome wire, used for transferring and inoculating microorganisms onto culture media. it is sterilized by heating in a flame until red hot before and after use to prevent contamination. it is commonly used in microbiology for streaking plates and handling bacterial cultures.

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

corporations/Associations/Others

CTN :45151624

18 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

Organic Solvent Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others