Latest outboard roller Tenders | Government outboard roller Tenders

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

CTN :45009306

02 May, 2026 NA

Palwal - Haryana

Tender For tender for purchase of complete cane rake carrier chain, complete main bagasse carrier chain, spares of inter carrier chain and bagasse carrier chain

corporations/Associations/Others

CTN :44925846

08 May, 2026 1.00 Crore

Multi City - Multi State

Tender For supply of chain and chain spares e e - per drawing , cane carrier chain side bar link carbon steel hardened and tempered suitable for 40 tonnes breaking load , attachment link , material grade en9 suitable for 60 tonnes, 229 mm pitch rake carrier chain as per drawing , chain bagasse carrier en9 case harden roller en19 side plate, link ss410 pin pitch 200 as2 agmt pin of cs harden 20mncr5 tempd every 4th link for 60 tbl.drawing , pin material grade ss410 duly hardened tempered and ground suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , bush , material grade ss410 suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , roller of material grade en9 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , inner link of material grade en19 suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , outer link attachment of material grade en19 suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , outer link round of material grade en19 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , outer link slotted of material grade en19 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , as2 swilled arrangement with pin of carbon stee 20mncr5 hardened and tempered suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , spare pin of carbon steel 20mncr5 of above swilled arrangement with split pin suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , cane carrier chain fabricated type with 200 mm standard pitched is8465 with case hardened 41cr4 roller, en353 pin and bush suitable for 60 tonnes breaking load.as per drawing , cane carrier slat, 6 mm thk 2040 lg material gr. e250, is 2062-2011 as per drawing , chain bush duly case hardened, tempered ground en353 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , roller plain duly case hardened, 41cr4 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , pin with castle nut with galvanised split pin, duly case hardened, tempered and ground, en-353 suitable for 60 tonnes, 200 mm pitch cane carrier chain as per drawing , inner attachment link, made of 41cr4 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , outer link round made of 41 cr4 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , chain outer link slotted made of 41cr4 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , forged steel block type rake carrier chain 229 mm pitched with castle nut locking arrangement ss bush and ss pin of ss410 material, suitable for 80 tonnes breaking load.as per drawing , pin thread with castle nut , material grade ss410 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , small bush , material grade ss410 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , big bush , material grade ss410 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , bush , material grade ss410 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , forged attachment link, material grade en9 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , chain bagasse carrier with en 353 case hardened roller, 41 cr4 side plate side link en 353 pin, pitch 200 with as2 swil agmt pin of cs 20mncr5 hardened and tempd every 4th link for 60 tbl. drawing , pin material grade en353 duly hardened, tempered and ground suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , bush plain , material grade en353 suitable for 60 tonnes, 200 mm pitch bagasse carrier chain //bid details 2 / 39 as per drawing , roller of material grade 41cr4 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , inner link of material grade 41cr4 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , outer link attachment of material grade 42cr4 suit