Latest outgoing cable Tenders | Government outgoing cable Tenders

Central Government/Public Sector

CTN :45391523

04 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply, installation, testing and commissioning of 8way ip 54 rated vertical double door tpnmcb db ,a) 1 nos. of 200a, 36ka, fp, mccb as incomer, b) 3 nos. of 32a, 18ka, tp mcb and 6 nos. of 6a, sp, mcb and 9 nos. of 16a, sp, mcbs as outgoing, cable adapter with standard specifications. preferred make; l&t, c&s, havells, abb, or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45252253

12 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , install, replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , install, replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels

State Government

CTN :45359850

15 Jun, 2026 35.23 Lacs

Midnapore - West Bengal

Tender For construction of outgoing cable trench, development of switchyard and repair of control room building, boundary wall and other ancilary civil work at pirakata 33/11 kv sub-station under medinipur division, dist paschim medinipur

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

CTN :45335488

28 May, 2026 NA

Sonarpur-Wb - West Bengal

Tender For supply of customized junction box made of 14 swg g. i. sheet size: 450mm x 350mm x 250mm complete with hinged door and locking system and providing 4 bolt terminal arrangement - 100amp suitable for power distribution, providing 3 nos. cable entry/exit holes suitable for incoming & outgoing cables of size 50 sq.mm - 2 nos. and 35 sq.mm - 1 no. also scalable a space for 1 no. 63 amps. mccb, along with aluminium strip of size 2.5 mtrs. x 0.05 mtrs. 2 inch wide 2 nos. make: indigenous/similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45336865

11 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of double hole lug terminl for tm outgoing cable for 700hp/1400 hp demu/dpcdrg. no.loco/ws/aii drg. no. demu/et-1/a. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45338003

09 Jun, 2026 NA

Perambur - Tamil Nadu

Tender For design, manufacture and supply of digital programmable fully automatic star delta starter control panel suitable for 30 hp submersible pump, wall mounting type made up in sheet steel enclosure of 16 swg of power coated paint with the following electrical components/switchgears housed and neatly wiredusing multi stranded pvc insulated copper cable certified to is 694 or latest. the panel shall have provisionat the bottom for the entry and exit of incoming and outgoing cables as per detailed specification enclosed.supply along with warranty certificate for 12 months. [ warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45291258

02 Jun, 2026 NA

Bangalore - Karnataka

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - bsnl te nit no20 providing maintenance to 2x750kva transformer substation faulty 11kv outgoing cable in outdoor yard shelter for metering cubicle repairs to 5hp compress..

Central Government/Public Sector

CTN :45210232

16 Jun, 2026 NA

Abu Road - Rajasthan

Tender For dowsil 1080 rtv oxime sealant (dow chemical) for sealing of parting line, frame cover, outgoing cable brush, split field coils, gaps terminal pole bolts, armature, stator commutator etc. of tm andmaterial supply in 100 grams packing only. spec no.-mp.ib.en.02.06.09, rev.-02 with revised recommendation vide rdso letter no-sd.eng.misc, date- 09.09.2021 (revised para-5, s. no.-22) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Central Government/Public Sector

CTN :45284355

24 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of double hole lug terminal for tm outgoing cable to wm/dsl/aii drawing no. demu/et-1/a for 700/1400 hp demu/dpc [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Outgoing Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors