Latest overhead line item Tenders | Government overhead line item Tenders

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :43033958

17 Dec, 2025 NA

Mahamayanagar - Uttar Pradesh

Tender For corrigendum : the work of shifting of line full deposite scheem at various place under edd-sadabad hathras. - safe carriage of following material from electricty store center hts to pit site of work through the kacha and pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, t&p, etc. which required for proper completion of work.(distance 00-50 kms.), 8.5/9 mtr. long pcc poles., 9/11 mtr. s.t. poles, acsr weasel conductor, earthing complete, shackle insulator, stay set complete, teoff channel, 33/11 kv pin insulator with pin, disc insulator with disc fitting, f bracket, 11 kv x-arm, 50/95/120 sqmm. ab cable, suspension clamp, dead end clamp, distribution box with clamp, pearcing connector, guarding angle with clamp, g.i wire 6/8/10 swg, neutral cum earth wire, cable jointing kit, 11 kv xlpe cable, 25 kva t/f, 63 kva t/f, 100 kva t/f, errection of following poles including cutting of kharanja/mettalic road/concrete portion while digging pit & complete h.t./l.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work., pcc poles 8.5/9 mtr., stp 9.0/11 mtr., errection and grouting of stays as per respo norms and as per direction of supervising engineer. grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost., fixing of earthing rod as per respo norms and as per direction of supervising engineer., safe installation of following new/repaired cousted t/f on newly constructed double pole in proper alignment direction & making all ht/lt connection., 25 kva t/f, 63 kva t/f, 100 kva t/f, laying, sagging and stringing and jumpering / binding etc. of new & old acsr weasal conductor / gi in 11 kv / lt lines as per respo manual and as per direction of supervising engineer., acsr weasal conductor, 50/95/120 sqmm. ab cable, xlpe cable, providing & fixing of following clamps, 11 kv x arms clamps for stp/pcc pole, nut,bolt & washer, 11 kv f clamp for stp/pcc pole, earthwire clamps, lt clamp with nut & bolt, cable jointing kit, cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer, guarding/reguarding of 11 kv line by laying, stringing, sagging and binding of 2 nos. parallel gi wire 6 swg after providing, fabrication and fixing of guarding angle and fabrication and fixing of x-guards (tillis) of gi wire at distance of 3 mtr., installation of extra t on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, t&p etc, required for proper completion of work. the "t" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material., dismentlling and removal of existing line from the various area, dismentlling of pole stp/pcc, back cartage, acsr weasel conductor scrap, iron scrap

State Government

CTN :43110076

26 Dec, 2025 10.00 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of electricals items various units at ndvsu, adhartal, jablpur (3rd call) - supply of electrical items approved list. make- polycab, havells, finolex, kei industries, rr kabel, sreenath, taparia, bosch, copper wire - 1 mm, copper wire - 1.5 mm, copper wire - 2.5 mm, copper wire - 4. mm, copper wire - 6. mm, copper wire - 10 mm, aluminium wire - 2.5 mm, aluminium wire - 10 mm, aluminium wire - 6 mm, pvc pipe x 10 , pvc pipe fitting l bow and bend, pvc pipe fitting t bend, pvc pipe fitting bend, ceiling led 2 x 2 , ceiling led 9 x 9 , ceiling led 6 x 6 , led flood light - 35 watt, led flood light - 60 watt, led flood light - 90 watt, led flood light - 200 watt, led street light 90 watt, led street light 60 watt, led bulb - 5 watt, led bulb - 9 watt, led bulb - 12 watt, led bulb - 18 watt, led bulb - 40 watt, lmv lamp - 90 watt, tube road t-5 (ftl tube light ), led batten light - 22 watt, main switch 63 amp, main switch 100 amp, main switch 200 amp, mcb 10 amp, mcb 16 amp, mcb 25 amp, mcb 32 amp, mcb 63 amp, mcb 100 amp, mcb 200 amp, spn 63 amp, spn 100 amp, spn 200 amp, change over, kit kat - 16 amp., kit kat - 32 amp., kit kat - 63 amp., kit kat - 100 amp., starter (three phase) 3 hp,, starter (three phase) 5 hp,, starter (three phase) 7.5 hp,, pvc casing inch, pvc casing 1 inch ( 1 ), pvc casing 1 inch ( ), pvc casing fittings - l bow - inch, pvc casing fittings - l bow 1 inch, pvc casing fittings - l bow - 1 inch, pvc casing fittings - t band - inch, pvc casing fittings - t band 1 inch, pvc casing fittings - t band - 1 inch, pvc casing nails, sheddle, sheddle1mm, sheddle2mm, sheddle 3 mm, sheddle4mm, sheddle5mm, sheddle6mm, sheddle 7 mm, sheddle8mm, sheddle9mm, sheddle10mm, sheddle 11 mm, sheddle 12 mm, sheddle13mm, sheddle14mm, sheddle 15 mm, sheddlepona inch, sheddle 1 inch, grip 6mm, pannel board, cable alluminium 1/2/3/3 core, cable alluminium - armored 1 phase 10sqmm, cable alluminium - armored 3 phase 25 sqmm, cable alluminium - armored 3 phase 50 sqmm, cable alluminium - armored 3 phase 70 sqmm, cable alluminium p p d cable 10mm, armored cable 1/2/3/3 core, armored cable - 3 phase 25 sqmm, armored cable - 3 phase 50 sqmm, armored cable - 3 phase 70 sqmm, joint kit ( 33/11 ), insulation tape ( 25 nos. tape each box ), rubber tape (lt.), 11 kv xlpe cable 3 core 3phase ( 3x35-50 sqmm), 11 kv xlpealuminium cable 3 core 3phase ( 3x70-90 sqmm), lighting resistant 33 kv, gum boot ( size 7 nub.), gum boot ( size 8 nub.), gum boot ( size 9 nub.), hand gloves heavy duty ( l.t.), ceiling fan ( 1200 mm sweep ), ceiling fan ( 1400 mm sweep ), wall fan -, exhaust fan - 9 , exhaust fan - 12 , exhaust fan - 18 , socket flush type - 6 amp, socket flush type - 16 amp, socket modular type 16 amp, switch flush type - 6 amp, switch flush type - 16 amp, switch modular type 6 amp, switch modular type 16 amp, angel holder, batton holder, pendant holder, remote cell, remote cell bell, pvc combined box - 3 module, pvc combined box - 6 module, combine switch socket 16 amp, ht cable air bunch -33kv 95 sqmm, fasteners - 3 , fasteners - 4 , fasteners - 6 , bus bar - 100 amp, cut out - 32 amp, cut out - 63 amp, jhulafor electric pole, dio fuse 33kv, regulator - electronic heavy duty modular, p.p. cable 10 mm, hammer bid - 6 mm, flexible pipe (1/3 ), t.p.n. 32 amp, t.p.n. 63 amp, holder, 3 pin top ceramic, pinchis ( taparia ), tester, screw driver ( four head ), pin insulator, disc insulator, shackle insulator, earth road, lightning arrester ( arrester), ac box, aluminium wire -4 mm, cut out -300 amp, cut out -200 amp, pvc pipe 1 inch, regulator - electronic heavy duty non modular, regulator - switch type modular, copper choke, electronic choke, condenser 2.5 mfd, condenser 3.15 mfd, condenser 4 mfd, condenser 8 mfd, condenser 10 mfd, extension board 6 amp., extension board 16 amp., open modular pvc box 3, open modular pvc box 4, open modular pvc box 6, open modular pvc box 8, open modular pvc box 12, open modular pvc box 18, stabilizer ac com

Central Government And Public Sector

CTN :43116013

30 Dec, 2025 18.98 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For purchase of spares from the original manufacturer for 11kv vcbs (model vm12) of bhel make. - closing unit assembly, tripping unit assembly, motor cut-off limit switch assembly, mechanism shaft assembly, tripping spring assembly, closing spring set, top pole head, bottom pole head, spring charge motor 220v (ac/dc), operating coil 220v (dc), vcb support insulator ø118, panel / busbar support insulator ø75, lever for vi, drive link, d-lever assembly, centering ring, spherical rod end, spacer tube, support rod, compression spring, aux switch 16 way, emergency tripping assembly, plug & socket assembly (male + female)-32 pin (indoelectricals make), slow closing handle, motor charging handle, packer cu, flexible connection up to 1600a, bearing, rollers, dashpot, set of clips, indicator, truck nylon wheels, nylon rollers for shutter lifting, bolt for truck wheel, jaw contact assembly up to 1600a, jaw contact square cu packer, manual knob push button (red), manual knob push button (green), damping rubber pad, auxiliary rod, swing bolt, actuating arrangement, cam shaft for rack-in/out, 52c/d auxiliary bracket, vcb interphase barrier, jaw contact polycarbonate shroud up to 2500a, insulating coupler, door gasket (4.4 mtr/panel), door lock assembly, door glass, interpanel busbar smc sheet barrier, shutter arrangement, limit switch test/service, tripping lever/knob, cleat, nut, insulating screw m6x22, rear cover polyamide handle, packer (round), al spacer (round), support insulator 095, support channel, busbar screw (special), steel stud, clamp plate, packer, link plate inplace of droppers al, barrier, sealing cover, busbar joint pvc shroud, support channel round packer, earthing connection, pvc sleeve l/f 0.4x104 for 75wd busbar, pvc sleeve 38p for wiring, space heaters 75w, bolt hex m12x75-8.8, bolt hex m12x65-8.8, nut hex m12x8, washer spg-12-st, washer mcd 13-st, screw hex m8x30-8.8, washer spg-8-st, washer mcd 8.4-st, nut hex m8-8, m20 bolts for support insulator, nylon m5 screw, nylon m5 nut, screw hex m6x20-8.8, washer spg lock 5cb-6-5t, washer mcd 6.4-st, nut hex m6-8, bolt hex m16x65-8.8, washer spg lock scb 16-st, washer mcd 17-st, thol/con 220vdc thermal overload relay with power, contactor having 1nc aux. contact., dc diode plate, barrier for top fixed contact, barrier for bottom fixed contact, large barrier between ct

corporations/Associations/Others

CTN :43132787

23 Dec, 2025 4.72 Lacs

Kanchipuram - Tamil Nadu

Tender For 33kv polymer comp pin insulator

corporations/Associations/Others

CTN :43098368

23 Dec, 2025 1.99 Lacs

Tirunelveli - Tamil Nadu

Tender For procurement of lt pin 3500nos and lt pin insulator 3400 nos

corporations/Associations/Others

CTN :43100237

23 Dec, 2025 64.26 Lacs

Vellore - Tamil Nadu

Tender For supply of 33kv polymer composite pin insulator

State Government

CTN :43067134

05 Jan, 2026 NA

Rupnagar - Punjab

Tender For tel consumable spares 2025 - tel consumable spares 2025, focus ring (oem part no. es1d10-309946-12), ring insulator a7 la4-8 (oem part no. es1d05-300188-12), ring insulator a7 la-q (oem part no. es1d05-300190-12), upper electrode (oem part no. es1d10-204338-13), o ring fluorine (door) (oem part no. 027-102291-1), o ring fluorine (gate) (oem part no. 027-002625-1), o ring viton (oem part no. 027-001710-1), o ring viton (oem part no. 027-001662-1), o-ring viton as568-281 blk (oem part no. 027-101034-1), 04-1721-1285 1500mm (rf strap) (oem part no. 071-001250-1), o-ring fluorine d0270 p-14 blk (oem part no. 027-000847-1), o-ring fluorine d0270 as568a-107 blk (oem part no. 027-001571-1), plug..(drm2) (oem part no. es1d10-401106-12), screw..blind 1 (drm2) (oem part no. es1d10-401935-12), plug s.r. (drm2) (oem part no. es1d10-402088-11), pin adjust(drm2) (oem part no. es1d10-404285-11), window shield depo (y2o3 coated) (oem part no. es1d05-400022-14)

corporations/Associations/Others

CTN :43082810

20 Dec, 2025 NA

Pudukkottai - Tamil Nadu

Tender For supply of 4500nos of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure pole [excluding c

corporations/Associations/Others

CTN :43082906

22 Dec, 2025 NA

Thoothukudi - Tamil Nadu

Tender For supply of 33kv polymer composite pin insulator with pin

Overhead Line Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors