Latest paint enamel Tenders | Government paint enamel Tenders

Central Government / Public Sector

CTN :41360136

21 Aug, 2025 NA

Digboi - Assam

Tender For supply of dpk25p068g accessories for ht motor : : - item 10 oil free air compressor -20 lit , item 20 spray paint gun with accessories , item 30 oxygen pack including filled cylinder , item 40 bearing pusher, hydraulic unit 10ton , item 50 hydraulic pump for puller,skf, tmhs 100 , item 60 hydraulic mobile floor crane,5 ton,10 ft , item 70 shackle d , cs, capacity 1 ton , item 80 shackle d , cs, capacity 3 ton , item 90 sling,flat webbing,eye loop,1tx1mtr , item 100 sling,flat webbing,eye loop,3tx3mtr , item 110 hand trolley,four wheel,capacity 2mt , item 120 hand operated grease gun , item 130 grease gun with flexible pipe

Central Government/Public Sector

CTN :41368670

08 Sep, 2025 NA

Mumbai - Maharashtra

Tender For supply of paint enamel synthetic interior finishing, signal red to isc no. 537 of is 5 : 2007 (re-affirmed - 2022) for railway coaches confirming to is 133 : 2023 (sixth revision) along with additional requirement of icf/md/spec - 052, issue status 02, rev 01 dtd. 26-05-2006 under rdso amendment no. 1a (rev. 1.0 effective from june 2020) as an additional requirement. packing in 20 ltrs. new non-returnable m.s. drums to is 2552 : 1989 (re-affirmed - 2018) with amendment no. 1 of 1999, gr. b2 [ warrantyperiod: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :41367811

16 Aug, 2025 NA

Samastipur - Bihar

Tender For supply of paint enamel synthetic interior finishing smoke grey to isc : 692 of is:5/2007 to is: 133/2023 along with additional stipulation as per icf specification no. icf/md/spec-052, issue status 02, revision 01 date 26.05.2006. (item packed in 20 ltrs new & sound non-returnable m.s. drums to is: 2552/89 grade b-ii). [ warranty period: 30 months after the date of delivery ]

CTN :41362179

16 Aug, 2025 NA

Haridwar - Uttarakhand

Tender For supply of timber teak 60 inch x 5 inch x 5 inch 0 pt 86 cft , timber teak 10 inch x 10 inch x 10 inch 0 pt 57 cft , timber teak 14 inch x 8 inch x 12 inch 0 pt 12 cft , sanding belt no 100 , sanding belt no 60 , emery paper 100 no , favicol sh 500gm , steel screw 4 inch long and 3mm thick star head , pu matt polish , pu sealer , pu thinner , yellow mitti as per sample , emery paper 320 no , emery paper 400 no , emery paper 600 no , stainer teak colour , golden powder , pu gloss polish , ms angle 50x50x3mm , ms flat 2 inch x 5mm , nut bolt 1 pt 5 inch x 8mm , duress waterproof plywood 8 ft x4 ft x12mm , timber marandi 10 ft x 2 inch x 1 pt 5 inch as per sample , nail 2 pt 5 inch no 16 , nail 3 inch no 16 , nail 1 pt 5 inch no 16 , steel screw 1 inch x 4mm star head , gloves leather as per sample , gloves rubber as per sample , wire brush as per sample , binding wire , drift pin , nylon rope 6mm yellow , cutting plier , white paint , red paint , og paint , waste cotton cloth as per sample , cement , sand fine , painting brush 1 inch , turpentine oil , isolator tpn 63 amp , mcb iron box 4 way , pvc ms single core 6 sqmm copper wire , change over switch rev fwd 16 amp 3 phase , switch fuse unit 100 amp

CTN :41329140

18 Aug, 2025 6.86 Lacs

Multi City - Karnataka

Tender For construction of nrlm shed in tadasa gp - labour charges for handing errection of rcc rings etc t, transportation charges of materials beyond 5 km at 10% t, fabrication charges tadasa, cost of 6.5mm m.s. coil tadasa, rcc cap 1000 mm dia, 100 mm thick t, trap for tadasa, indian type water closet of size 580 mm of specified make with footrests t, add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material t, lead or pvc connection pipe 32mm dia (for wash basin) t, c.i. / m.s. brackets for flushing cistern t, brass stop cock t, cp brass waste 32 mm of standard pattern t, cp brass chain with plug t, copper plated brass piller tap 15mm t, white vitreous china clay flat back wash basin size 550x400mm t, handling loading and unloading 3% on material t, labour charges for lifting and placing in position and making connection at 7% on material t, polyenthylene water storage tank of specified capacity l t, pvc pipe of 10kgcum,110 mm t, pvc pipes t, pvc pipe of 4kgpercum,75 mm t, polythylene pipes high density 32mm external dia t, add 5% for fittings and wastage charges t, licenced plumber with tools t, add cement sand and grit 1% on material t, mathi/nandi wood planks for panels 25 mm thick t, hom of machinaries for planing t, add cutting and other wastage 5% t, honnewood planks for panels 20 mm thick tadasa, honne wood tadasa, unit cost as per the specification t, add brush at 1% on cost of paint t, enamel metal paint t, add handling , loading and unloading at 2% on material t, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint t, ready mix primer paint (ready mix red lead paint) t, add hom of welding and grinding machine at4% on material t, welder grade i t, fitter claass t, ms flat t, m.s rods t, add hom of welding and grinding machine at2% on material t, fabricator t, five point five zero mm thick plain glass, chrominum plated screws t, cleat angles t, alluminium handles - 15 mm t, alluminium tower bolt - 20 cm t, pvc edge beading t, rubber beading for shutters beading t, nylon rollers t, aluminium window frame section 1.20 mm thick t, lime t, painter class i t, add brush, putty, sand paper, roller at 5% on cost of paint t, plastic emulsion paint tadasa, vitrified tiles 600x600 mm t, white cement t, ceramic tiles 30 x 30 cms t, add sundries charges at 2 % on material t, add handling , loading and unloading at 1% on material t, casurina poles 100 - 150 mm t, mason class i (with tools) t, solid concrete blocks (40into20into20 cms)-5.00 n/sqmm t, add providing and removing scaffolding at 3% on labour t, formwork, centering & scaffolding for chejjas, canopy & other architectural projections of minor sections t, formwork, centering & scaffolding for columns & piers t, centering,scaffolding for beams t, formwork, centering & scaffolding for roof slab t, mixer (concrete small used in culvert) tadasa, boulders tadasa, bond stone 20 x 20 x 45 cm tadasa, size stone 20 x 20 x 25 cms tadasa, broken stone aggregate 40 mm size tadasa, add watering charges at 1 % on material tadasa, hom of vibrator 0.71 days tadasa, mixer (concrete) - 1 cum capacity tadasa, plasticizer / super plasticizer tadasa, portland cement tadasa, coarse sand (zone iii) tadasa, broken stone aggregate 12 mm to 10 mm size tadasa, broken stone aggregate 20 mm size tadasa, add watering charges at 1 % on labour tadasa, add sundries charges at 1 % on labour tadasa, over head & other miscellaneous charges tadasa, add sundries charges at 1 % on material tadasa, binding wire tadasa, tmt bars fe 500 tadasa

corporations/Associations/Others

CTN :41192873

11 Aug, 2025 2.10 Lacs

Haveri - Karnataka

Tender For corrigendum : dma/hvr/2025-26/water supply materials annual maitainance/ts - for 25 mm dia gi collar , for 32 mm dia gi collar , for 50 mm dia gi collar , electro fusion coupler 63 mm, electro fusion coupler 75 mm, electro fusion coupler 90 mm, electro fusion tee 63 mm , electro fusion tee 75 mm , electro fusion tee 90 mm , electro fusion elbow 63 mm , electro fusion elbow 75 mm , electro fusion elbow 90 mm , electro fusion reducer 90x63 mm , electro fusion reducer 75x63 mm , stainer 80 mm, m.s. flange 3 inch, cpv fta 0.5, cpve elbow brass 0.5 , compression mta 63 mm , compression mta 75 mm, compression mta 90 mm , pvc insulated cable of flat 3 core (sheathed) 1x3x1.5 sqm, sqm pvc insulated cable of flat 3 core (sheathed) 1x3x2.5, pvc insulated cable of flat 3 core (sheathed) 1x3x4 sqm, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000 3phase, ss bowl and impeller with low volt motor as per specifications,6.50 hp - 135 lpm at 110 m equals to 12 stg outlet dia - 2.00 inch , gi union 20.88.4 32 mm nominal bore , gi union 20.88.6 50 mm nominal bore , for 20 mm dia gi collar , pvc tee 180 mm dia , pvc tee 200 mm dia , pvc bend 25 mm dia , pvc bend 32 mm dia , pvc bend 40 mm dia , pvc bend 63 mm dia , pvc bend 180 mm dia , pvc bend 200 mm dia , pvc service saddles 25 mm dia , pvc service saddles 32 mm dia , pvc service saddles 110 mm dia , pvc service saddles 140 mm dia , pvc service saddles 160 mm dia , pvc service saddles 180 mm dia , pvc service saddles 200 mm dia , pvc reducer 25 mm dia, pvc reducer 32 mm dia , pvc reducer 40 mm dia , pvc reducer 140 mm dia , pvc reducer 160 mm dia , pvc reducer 180 mm dia , pvc reducer 200 mm dia , chlorinated polyvinyl - chloride (cpvc) pipe 32 mm nominal dia. , brass bib-cock 15 mm dia , brass bib-cock 20 mm dia , coconut broom stick , coir brushes , enamel paint , pvc couplers 25mm dia , dry distemper , nuts and bolts , ms flanges of 100mm dia and 8mm thick. , ms flanges of 150mm dia and 12mm thick. , pvc couplers 32mm dia , ms flanges of 200mm dia and 16mm thick. , ms flanges of 250mm dia and 16mm thick. , ms flanges of 300mm dia and 16mm thick. , providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications 2 hp 1.5kw-25 stage, electrical & automation aluminum alloy dol starter, power 4 horsepower 3phase l&t,siemens equvilent, electrical & automation aluminum alloy dol starter, power 4 horsepower single phase l&t,siemens equvilent, pvc couplers 40mm dia , pvc couplers 50mm dia , pvc couplers 90mm dia , pvc couplers 160mm dia , pvc couplers 180mm dia , pvc tee 32 mm dia, pvc tee 140 mm dia , for 20 mm dia gi elbow , for 25 mm dia gi elbow , for 32 mm dia gi elbow , for 50 mm dia gi elbow , for 20 mm dia gi bend , for 25 mm dia gi bend , for 32 mm dia gi bend , for 50 mm dia gi bend , for 20 mm dia gi tee , for 25 mm dia gi tee , for 32 mm dia gi tee , for 50 mm dia gi tee , for 20 mm dia gi socket , for 25 mm dia gi socket , for 32 mm dia gi socket , for 50 mm dia gi socket , for 15 mm dia gm gland cocks , for 20 mm dia gm gland cocks , providing and laying of warning tape / caution tape / detector tape for hdpe pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant iss with latest amendments with appurtenances., complete, size 50 mm gate valve, size 50 mm non-return valve, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm nominal dia. , chlorinated polyvinyl - chloride (cpvc) pipe 25 mm nominal dia. , medium duty gi pipe of 32mm dia , medium duty gi pipe of 50mm dia , pvc pipes of 6 kg/cm2 for 110mm(1.894) , pvc pipes of 6 kg/cm2 for 160mm(3.923) , pvc pipes of 6 kg/cm2 for 200mm(6.233) , rcc pipe np3 600 mm dia & 2.5 m long , rubber gasket sbr quality 450mm dia. , upvc pipe is 16098 sn 4 - 110mm dia , hdpe pipe grade pe80-pn6.0, 75mm , hdpe pipe grade pe80-pn6.0, 90mm , hdpe pipe grade pe80-pn6.0, 110mm , providing and fixing ms

CTN :41345988

16 Aug, 2025 NA

Chamoli - Uttarakhand

Tender For supply of manufacturing and supply of structural items of fol shed of size 4200 x 3200 x 3000 mm using mild steel structure , side walls stores using 0.60mm of ppgl sheets , roofing sheets as per ts , ms doors as per ts , self screw for fixing of roof size as reqd on site. , star screw full thread 25 mm isi mark , nuts and bolts 8mm dia 60mm to 120mm long with washer , gi j hook 8mm with 1 nut 2 bitumin washer and limped washer , rivit of 500 nos , led tube light complete set 18w 4 feet long , switch piano flush type , pvc switch board 6 inch x4 inch , pvc casing and capping of size 25 mm , wire single core copper conductor 2.5 sqmm , mcb 10 amp sp , armoured cable10 sqmm 4 core copper , lt panel board factory fabricated , shelves for storage 2100 mm x 450 mm x 750mm , insulation tape 45 mtr with isi mark , change over switch 100 amp 04 pole , ceiling rose. , service wire 10 sq mm flat 2 core aluminium connector cable , gi wire 14swg , fire extinguisher 6 kgs abc dry powder stored pressure type , paint for touch up green , paint for touch up black , distemper , plywood as per ts , scantling teak wood size 140 to 160 inch , frp storage tank conforming to ul 1316 of capacity 5kl with standard accessories , wire single core copper conductor 2.5 sq mm , pvc pipe 100 mm dia , gi elbow 20mm , gi gate valve connector , gi socket 20mm with thread , gi union 20mm , pvc flexible hose pipe 20 mm dia , lightening conductor made of copper tube with five copper prongs of length 15 cm with complete stores , industrial fuel transfer pump automation grade , provision of fire extinguisher 50 kgs abc dry powder stored pressure type trolley mounted. , hdpe tarpaulin of size 30 feet x 30 feet , ordinary portland cement grade 43 , coarse sand , stone aggregate 20 mm , stone aggregate 40 to 60 mm , 10 mm tmt bar , connected stores as per final design ) /bid number : gem/2025/b/6534418 * /dated: 05-08-2025 & & / bid document 1 / 42

CTN :41330366

16 Aug, 2025 NA

Panchkula - Haryana

Tender For tender for supply of green net cloth 90 % , enamel white paint , enamel yellow paint , tarpin oil for paint , side drum painting , tenor drum painting

CTN :41342863

19 Aug, 2025 8.37 Lacs

Haveri - Karnataka

Tender For supply of materials to nrlm shed work under mgnrega for sammasagi gram panchayath hangal taluk haveri dist - miscellaneous or contingencies charges_smsgi1, electrification_smsgi1, lumpsum materials_smsgi1, display board / cib_smsgi1, broken stone aggregate 40 mm size_smsgi1, bond stone 20 x 20 x 45 cm_smsgi1, rubble stones_smsgi1, solid concrete block (40 15x20 cms) 5.00 n or sqmm_smsgi1, jungle wood runners and planks_smsgi1, casurina poles 75 to 100 mm dia_smsgi1, casurina poles 100 to 150 mm_smsgi1, silver oak or equivalent planks 38 mm thick_smsgi1, binding wire_smsgi1, tmt bars fe 500_smsgi1, mathior nandi wood planks for panels 25 mm thick_smsgi1, hom of machinaries for planing_smsgi1, add cutting and other wastage 5 percentage_smsgi1, honnewood planks for panels 20 mm thick_smsgi1, honne wood_smsgi1, add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint_smsgi1, ready mix primer paint (ready mix red lead paint)_smsgi1, fitter class i_smsgi1, z section_smsgi1, reeded glass 2 mm thick_smsgi1, tw beading for fixing glass_smsgi1, stays_smsgi1, hinges 5 heavy duty_smsgi1, handles_smsgi1, ms clamps_smsgi1, mullion section_smsgi1, t section_smsgi1, add brush, putty, glue at 5 percentage on cost of paint_smsgi1, whitening_smsgi1, dry distemper_smsgi1, add brush, putty, sand paper at 2 percentage on co stof paint_smsgi1, water proofing cement paint_smsgi1, mason class ii (with tools)_smsgi1, add providing and removing scaffolding at 3 percentage on labour_smsgi1, painter class i_smsgi1, add brush, putty, sand paper at 3 percentage on co stof paint_smsgi1, enamel paint_smsgi1, vitrified tiles 600x600 mm_smsgi1, white cement_smsgi1, ceramic tiles 30 x 30 cms_smsgi1, add watering charges at 1 percentage on labour_smsgi1, add white cement for pointing at 2 percentage on material_smsgi1, add handling , loading and unloading at 2 percentage material_smsgi1, mixer (concrete small used in culvert)_smsgi1, border tiles 30 x 10 cms_smsgi1, glazed tiles 300x450_smsgi1, mason class i (with tools)_smsgi1, s or p trap 100mm _smsgi1, indian type water closet of size 580 mm of specified make with footrests_smsgi1, add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material_smsgi1, lead or pvc connection pipe 32mm dia (for wash basin)_smsgi1, c.i. m.s. brackets for flushing cistern_smsgi1, brass stop cock_smsgi1, cp brass waste 32 mm of standard pattern_smsgi1, cp brass chain with plug_smsgi1, copper plated brass piller tap 15mm_smsgi1, white vitreous china clay flat back wash basin size 550x400mm_smsgi1, handling loading and unloading 3 percentage on material_smsgi1, labour charges for lifting and placing in position and making connection at 7 percentage on material_smsgi1, polyenthylene water storage tank of specified capacity l_smsgi1, pvc pipe of 10kg cum,110 mm_smsgi1, pvc pipe of 6kg cum,63 mm_smsgi1, pvc pipe of 4kg cum,75 mm_smsgi1, polythylene pipes high density 32mm external dia_smsgi1, add 5 percentage for fittings and wastage charges_smsgi1, licenced plumber with tools_smsgi1, add cement sand and grit 1 percentage on material_smsgi1, bib cock 20mm nominal bore_smsgi1, tools and plants at 2 percentage on material_smsgi1, hom of cutting and grinding machine_smsgi1, mechanic class ii mechanic hmp grade i or eme grade_smsgi1, add_smsgi1, hom of welding and grinding machine_smsgi1, welder grade i_smsgi1, corbon electrodes_smsgi1, rms gusset plate_smsgi1, ms pipes of 80 mm to 100 mm dia_smsgi1, unit cost as per the specification_smsgi1, labour charges for handing errection of rcc rings etc. at 5 percentage_smsgi1, transportation charges of materials beyond 5 km at 10 percentage_smsgi1, fabrication charges_smsgi1, cost of 6.5mm m.s. coil_smsgi1, add watering charges at 1 percentage on material_smsgi1, hom of vibrator 0.71 days_smsgi1, mixer (concrete) 1 cum capacity_smsgi1, plasticizer or super plasticizer_smsgi1, portland cement_smsgi1, coarse sand (zone iii)_smsgi

State Government

CTN :41023796

21 Aug, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of miscellaneous consumables for unit coh and routine maintenance work at emd-2-tg wtps,gsecl. - ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, godrej make 7 lever door lock, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, polyester webbing sling, swl 5000 kg x 3 mtr, impact wrench power/battery operated, cordless screw driver power/battery operated, flat cable 3 corex4 sqmm with copper conductor for submersible motor, painting brush size 3" (75 mm), painting brush size-38 mm, allen key set of size : 1/16" (inch) to 3/8" (inch), allen key set of size 1.5 to 10 mm, rusting clean brush, wire brush round 1.1/2", plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., hand drill machine size 13mm, britelite 1200 meters long rang torch rechargeable led flashlight with charger., drill bit set it/addision,size;2 mm to 10 mm., pvc hand gloves acid/alkali proof size 16" (yelow colour), esab earthing clamp, washing powder ( 1 kg pack ), transparant tumbler 1 ltr, pvc buckets-15ltr, painting brush size 2" (50 mm), self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, dr. back make backtol red in 1 lit. tin varnish, light gray paint size 4 liters light gray paint size >> 1 liter., rotary selector switch capacity-12amp ,3 way no-off 3 position 60 degree,kaycee make cat no-2t16c, test leads (probes) for digital multimeter, auxiliary relay re-300 coil voltage 250v dc, jyoti make re-300 plug in type relay , coil voltage 240 v,50hz ac with led indication & 4 change over contact having 10 amp rating., plastic tool box with organizer product no.:- ptb 16 (195 x 240 x 435), integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - red., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - green., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - amber., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - white., integral led type solid state indicating lamp with lamp holder & lens for 230 v dc +/- 10 percent panel cutout, 30.4 mm dia colour blue, start push button c & s make type- rb2-ba3+rb2-bz10 (rcb2-ba3)., mushroom head stop pushbutton turn to release c& s make,type- rb2-bs54+rb2-bz10 (rcb2-bs54)., contact element -1no. code rb2be101 make c&s, contact element, 1 nc contact, c and s cat. no. rb2-be-102, 250 v ac/dc control supply switch, capacity-16amp,type-base mount., multifunction multirange timer type:-micon225 0.1 sec -10 hrs., 24/240 vac/dc, cat no: 2a5dt5, 2c/o make:-l&t, manila rope, size: 16 mm dia, manila jute rope size 12 mm, auxiliary relay of jyoti make re-300 with led indication, 4 c/o contacts for 110v ac., jyoti make re-300 plug in type relay , coil voltage 24 v,dc with led indication & 4 change over contact having 10 amp rating.

Paint Enamel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government