Latest paint enamel Tenders | Government paint enamel Tenders

Central Government/Public Sector

CTN :40037931

19 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of paint enamel synthetic exterior finishing "mid burnswick green"

CTN :40031392

07 May, 2025 NA

Durg - Chhattisgarh

Tender For tender for supply of paints for structural - paint syn enm is 2932 smoke grey20lt pkg , paint synth enamel is 2932 enamel synth , paint syn enm is 2932 clr black 4l pkg , paint syn enamel is2932 uc sm red signal , paint synth enamel glossy green opal , is 2932 enamel synth uc sm white grey , paint enamel synth uc sm blue light

Central Government/Public Sector

CTN :40026743

28 Apr, 2025 NA

Solapur - Maharashtra

Tender For supply of paint enamel synthetic exterior finishing, %u201ccolour %u2013white%u201d for railway coaches confirming to is 8662: 2024 and rdso amendment no. 1 (rev. 0) for pigment content as an additional requirement to is 8662: 2024 w.e.f. 01.08.2016 with additional requirement of icf/md/ spec-045 issue status 02 rev. 03 dated 14.06.2007 and rdso amendment no. 1a (rev. 1.0, effective f rom june - 2020) as an additional requirement. packing in 20 ltrs. new non-returnable m.s. drums to is 2552: 1989 (re-affirmed %u2013 2018), with amendment no. 1 of 1999, gr. b2. [ warranty period: 1 2 months after the date of delivery ]

Central Government/Public Sector

CTN :40026759

15 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of paint enamel synthetic exterior finishing "red oxide" (isc 446) and to is.8662/ 04 and to icf specn icf/md/specn-045, issue status 02, rev.03 with amendment dated 22.04. 08 wet opacity as per nth certificate. the pigment content shall be 6% minimum (by mass ) as per rdso letter no. m&c/pcn/i/vol.ii dt.12.05.16 as per rdso amendment no.1. packed i n 20 litres new and sound non-returnable m.s.drums to is.2552/89 amend.no.1. (reaffirm ed 2001) gr.b2. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40028377

23 Apr, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of paint,enamel synthetic exterior finishing signal red (isc:537 of is.5-2007) to specification: is:8662/2004 (second rev) reaffirm ed 2019 or latest with rdso amendment no.1 (revision 0) for pigment content as an additional requirement to is: 8662/2004 w.e.f 01.08.16 with additional requirements of icf/md/spec. -045 issue status -02 rev. no. 03 dt.24/06/2007 and rdso amendment no.1a (rev.1.0) from june- 2020 as an additional requirement. packed in 20 litres new and sound non-returnable ms drums to is 2552/89, reaffirmed 2018, gr.b2. [ w arranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :39993213

02 May, 2025 NA

Bangalore - Karnataka

Tender For supply of enamel paint , glossy enamel paint , enamel red oxide primer , enamel thinner

Central Government/Public Sector

CTN :40000441

03 May, 2025 1.50 Lacs

Kudligi - Karnataka

Tender For supply of paint-, , , enamel paint (including pigment/colours) , , exterier emulsion paint (including pigment /colours) , , interior emulsion paint (including pigment /colours) , , exterier wall primer , , interior wall primer , , metal primer , , wood primer , , white distemper , , black board paint , , stainer , , asian paint damp proof ultra | , , terrace water leakage solution | roof waterproofing , , enamel thinner , , cem , , plaster of paris , , brush , , wall care putty , , interior roller , , exterior roller , , set roller , , set roller , , putty blade , , putty blade

CTN :39774434

16 Apr, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold or ambuja or ultratech or acc or jk or dalmia , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , coarse aggregate 40 to 63 mm graded , stone boulders 9 inch to 12 inch , mild steel bars of size 8 mm dia conform to is 432 part 1 1982 tmt bar make tata or sail or jsw , water proofing compound conform to is 2645 2003 make pidilite or dr fixit or fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs roll , gi binding wire tata sail jsw , cement base paint scowcem make berger or asian or nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bag of size15 inch x 30 inch , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5 2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , ismb hot rolled ms 200 x 100x 4m make tata or sail jsw , prefeb mild door steel of size 750x 1800mm double shutter outer frame isa 40x40x6mm and door shutter isa 35x35x5mm isa 30x30x3mm 0 point 75 m x 1 point 8 m double shutter tata sail jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make tata or sail or jsw , loop holes 780 x 300 mm make tata or sail or jsw , loop holes 1000 x 300 mm make tata or sail or jsw , loop holes 1250 x 350 mm make tata or sail or jsw , ventilator steel 600x450 mm isa 30x30x3mmand 1 mm isa 35x35x6mm and tower bolt 8mm dia 75 mm long make tata sail jsw , wooden plank for shuttering ii class wood of size 3 x0 point 3 x0 point 026 m , wooden scantling various size , nails various sizes , air terminatoin single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block made of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , galvanised iron strip 32x6mm , funnel fitted with 20mm dia gi pipe 1 point 5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with ms frame , charcoal , salt , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto or polycab or finolex

CTN :39774435

16 Apr, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold or ambuja or ultratech or acc or jk or dalmia , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , coarse aggregate 40 to 63 mm graded , stone boulders 9 inch to 12 inch , mild steel bars of size 8 mm dia conform to is 432 part 1 1982 tmt bar make tata or sail or jsw , water proofing compound conform to is 2645 2003 make pidilite or dr fixit or fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs roll , gi binding wire tata sail jsw , cement base paint scowcem make berger or asian or nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bag of size15 inch x 30 inch , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5 2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw , ismb hot rolled ms 200 x 100x 4m make tata or sail jsw , prefeb mild door steel of size 750x 1800mm double shutter outer frame isa 40x40x6mm and door shutter isa 35x35x5mm isa 30x30x3mm 0 point 75 m x 1 point 8 m double shutter tata sail jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make tata or sail or jsw , loop holes 780 x 300 mm make tata or sail or jsw , loop holes 1000 x 300 mm make tata or sail or jsw , loop holes 1250 x 350 mm make tata or sail or jsw , ventilator steel 600x450 mm isa 30x30x3mmand 1 mm isa 35x35x6mm and tower bolt 8mm dia 75 mm long make tata sail jsw , wooden plank for shuttering ii class wood of size 3 x0 point 3 x0 point 026 m , wooden scantling various size , nails various sizes , air terminatoin single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block made of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , galvanised iron strip 32x6mm , funnel fitted with 20mm dia gi pipe 1 point 5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with ms frame , charcoal , salt , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto or polycab or finolex

CTN :39711513

16 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk , dalmiya under job no 2506 svl pd with ohp as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , water proofing compund conforming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll , gi binding wire tata , sail , jsw , cement based paint snowcem make-berger , asian , nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags khaki colour of size 30 inch x 15 inch inside laminated interlocking stiched , weight of the each bag should not be less then 42-45 gms oblique bag , anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian , berger , neroloc , synthetic paint enamelled og conforming to is 5-2004 make-asian , berger , nerolac , thinner. make-nerolac , berger , asian , srt 2440 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , ismb hot rolled 200x100mm and 4 mtr long make-tata , sail , jsw , prefeb mild steel door of size 750x 1800mm double shutter , outer frame made out of isa 40x 40x6mm and door shutter frame make-tata , sail , jsw as per store list , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , loop holes 780 x 300 mm make-tata , sail , jsw , loop holes 1000 x 300 mm make-tata , sail , jsw , loop holes 1250 x 300 mm make-tata , sail , jsw , ventilator steel 600x450 mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal , tata , kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings , drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto , polycab , finolex. , charcoal , salt

Paint Enamel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector