Latest paint finishing Tenders | Government paint finishing Tenders

Central Government And Public Sector

CTN :40065386

08 May, 2025 18.28 Lacs

Bellary - Karnataka

Tender For tender for supply of carefully removing the veneering wall etc. , after proper documentation bringing them down at a height of 2.50 mtr , stocking for reuse , erecting and removing of supports at down properly etc. , complete. , carefully removal of core filling in between stone masonry veneer wall and stacking the useful materials and conveyance of debris to a far away from the monument premises , etc.complete , excavation/scientific clearance of earth deposit to retrieve fallen architectural stone elements and to expose the buried plinth and original floor & drainage system , including stacking useful stones and disposing of the excavated earth after proper screening outside the temple complex , etc.complete. , carefully resetting the old available veneer stone and new stone in original position in lime mortar 1in2 including necessary pointing the stone joints in same mortar with suitable colour oxides , curing , as per the standard specifications and as directed etc. complete. , construction of brick work for corefilling and in the edges with country bricks specially made as per requirement in lime mortar 1in2 , curing etc. , complete. , providing apron and pathwaty using new stone flooring slabs of size 1.20m to 0.90m in length 0.60m to 0.45m in breadth and 3inch to 4inch thick properly dressing as per the old available clues setting in lime mortar 1in1.5 above the foundation concerete and pointing the stone joints with lime mortar 1in2 curing etc.complete. , supplying and making of new veneer stone with good quality of new stones properly dressing all sides and architectural designs as per the available clues in the place of damaged and missing members etc.complete. , disposal of waste and unserviceable materials outside temple premises , stacking the stone members and leveling the undulated area , etc.complete. 1.disposal of building rubbish or malba or similar unserviceable , dismantled or waste materials 100 cum 2. removal and stacking of store members 75 cum 3. for leveling the area-creation of parking space approximately size of 80m x 6m x 0.50m 240 cum

State Government

CTN :40074280

07 May, 2025 19.95 Lacs

Gwalior - Madhya Pradesh

Tender For repair and maintenance and other work water supply, sanitary fitting, white wash, colour wash and painting work in old high court section under h.q.2 sub division gwalior

State Government

CTN :40084843

11 May, 2025 50.00 Lacs

Raipur - Chhattisgarh

Tender For white washing, colour washing, distempering & painting work of res. and non residential building, rajbhawan section, under construction sub division-2, raipur

State Government

CTN :40085709

11 May, 2025 20.00 Lacs

Raipur - Chhattisgarh

Tender For white washing, colour washing, distempering & painting work of res. and non residential building at medical college, state health and physiotherapy college, i.t.i section, under construction sub division-2, raipur

State Government

CTN :39813548

01 May, 2025 5.07 Lacs

Rajkot - Gujarat

Tender For corrigendum : gi roofing work for sdn store room, colour work and other miscellaneous work for vavdi sdn under rajkot city division 3

State Government

CTN :40093298

03 May, 2025 7.53 Lacs

Bhavnagar - Gujarat

Tender For repairing of lti building gariyadhar (pro. water tank, colour work, plumbing work, wire fancing & , expansion joint work).

State Government

CTN :40059532

28 Apr, 2025 16.85 Lacs

Godhra - Gujarat

Tender For special repair to multi storey building phase-i collector office at godhra dist. panchmahal (repairs to toilet, drainage, colour work)

State Government

CTN :40073627

06 May, 2025 3.50 Lacs

Dhar - Madhya Pradesh

Tender For iti item - basic electrical er. book scvt, work shop calulation & science electrical book scvt, work shop calulation & science mechenical book scvt, basic er. drwaing electrical book, basic er. drwaing mecheical book, employer ability skill book, carpainter trade theory book, wire man trade theory book, tracter mechenic trade theory book, fan regulator, aluminum wire 6mm isi mark, aluminum wire 8 mm isi mark, pander holder, casin patti pvc 1 inch, casin patti pvc 1.5 inch, copper wire isi mark celeve insulation, warnish, cotton tap, cilive no. 1 to 7, steel screw 16 by 4, wood polish warnish, copper wire 1.5 mm, copper wire 2.5mm, flaxible wire 25/36, soldring wire, soldring flux, tap isi mark, cotton weste, engine oil crb, drill machine chakkra 5 inch sut with key, lawan remover bush cutter machine carben brush, grinder wheel ( smoth wheel ), oil filter isi mark, disel filter, touch wood polish, wiper, plastic grip, polish, brush kalam, butten holder, fan regulator resistance, bell push switch, ciling rose, angle holder, water colour camel, bombay kill(nail)3 inch, biranji 3 by 4 inch, drill burma, keel 1 inch 2 inch 3 inch, fevicol, sent paper rezmal 0 to 60 no., roll paper 80 no isi, laboratry ovum ilament 500 watt, drill machine 13mm armecher carbon brush, lakdi beat 6 mm to 12 mm, grinder patte 36 40 60 80 no., grinder dick, cutter machine patta 5 inch, grinder patte loha ghisne ka, circuler saw machine cutter 08 inch, circuler saw machine rande ki blade 13 inch, ply 18 mm 4 by 8 isi, ply 12 mm 4 by 8 isi, pipe 2 inch 20 feet long, angle 2 inch 10 ft long, door mate, thinner, prakar, drawing copy, practical copy, cane chair, jangal lakadi satkata babul neem etc, sanmica 4x8, fan bearing 6201/6202, pvc paper 5, 7 no, fan condenser 2.5 mfd, welding electrodes size 2.90 by 3.50mm, tractor fuel pipe line all size, v belt machine all size, nut bolt all size, machin screw all size, half treat steel screw all size

State Government

CTN :40059764

12 May, 2025 26.82 Crore

Dahod - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka jhalod dist dahod under taluka panchayat, jhalod dist dahod under mgnrega (annual unit rate)-, , brick aggregate (single size):40 mm nominal size , stone aggregate(single size):63 mm nominal size , stone aggregate(single size):50 mm nominal size , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , stone aggregate(single size): 10 mm nominal size , stone aggregate(single size): 06 mm nominal size , safeda ballies 125 mm diameter , paving bitumen of grade vg 10 of approved quality , bitumen grade pmb - 40 , premoulded joing filler 12 mm thick , coal tar , blasting powder , brick bats , wire brush , soft brush , portland cement , white cement , coal (steam) , brass handles 125 mm with plate 175x32 mm , brass handles 100 mm with plate 150x32 mm mm , brass door latch 300x16x5x mm (0.380 kg) , brass door latch 250x16x5 mm (0.350 kg) , brass screws 20 mm , nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide , , cement concrete jali 50 mm thick , cement concrete jali 40 mm thick , cement concrete jali 25 mm thick , kerosene oil , unslaked lime , marble dust/ powder , acrylic distemper ist quality, having voc content less than 50 gm/litre , exterior primer , moorum , dry distemper , oil bound washable distemper/ acrylic distemper , linseed oil (double boiled) , distemper primer , acid proof paint (chocolate or black) , anticorrosive bituminous paint (black) , black japan , enamel paint , plastic emulsion paint , water proofing cement paint , ordinary varnish , superior copal varnish , superior spar varnish , black colour dark shade pigment , rolling shutter made of 80x1.25 mm machine rolled laths , coarse sand (zone iii) , fine sand (zone iv) , galvanised steel plain sheets , mild steel round bar 12 mm dia and below , mild steel round bar above 12 mm dia , , twisted steel/deformed bars , mild steel square bars , structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness , flats exceeding 10 mm in thickness , mild steel plates , mild steel hooks , mild steel rivets , galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , galvanised steel j or l hooks 8 mm dia , galvanished steel barbed wire , stone for masonry work , stone for pitching 15 cm x 22.5 cm , stone dust , precast terrazzo tiles 22 mm thick (light shade) , precast terrazzo tiles 22 mm thick (dark shade) , g.i limpet washer , bitumen washer , g.i. plain washer thick , water proofing materials , wire mesh (rabbit) , chequered terrazzo tiles 22 mm thick (light shade) , chequered terrazzo tiles 22 mm thick (dark shade) , diesel oil , 18 mm thick flamed finish granite stone slab , brass bib-cock-15 mm dia , brass stop-cock 15 mm dia , c.i. cover and frame 300x300 mm inside , c.i. grating 100x100 mm , , twisted steel/deformed bars , mild steel square bars , structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness , flats exceeding 10 mm in thickness , mild steel plates , mild steel hooks , mild steel rivets , galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , galvanised steel j or l hooks 8 mm dia , galvanished steel barbed wire , stone for masonry work , stone for pitching 15 cm , 22.5 cm , stone dust , precast terrazzo tiles 22 mm thick (light shade) , precast terrazzo tiles 22 mm thick (dark shade) , g.i limpet washer , bitumen washer , g.i. plain washer thick , water proofing materials , wire mesh (rabbit) , chequered terrazzo tiles 22 mm thick (light shade) , chequered terrazzo tiles 22 mm thick (dark shade) , diesel oil , 18 mm thick flamed finish granite stone slab , brass bib-cock-15 mm dia , brass stop-cock 15 mm dia , c.i. cover and frame 300x300 mm inside , c.i. grating 100x100 mm , s.c.i. gully or nahani grating 100 mm dia , vitreous china pedestal

State Government

CTN :40044754

23 Apr, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

Paint Finishing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors