Get complete information related to latest Paint Finishing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Paint Finishing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Paint Finishing Tenders.
Tender For tn 1310/3a dated 05.04.2025 5. painting, finishing, and repair work at the office of the chief engineer/superintending engineer, saharanpur, pwd, saharanpur.
Tender For laying of tiles, weathering course, roof tiles, painting in the classrooms and maintenance works in old building in boys higher secondary school in ward no. 15 in gobichettipalayam municipality.
Tender For repair, maintenance and painting of ground floor and first floor of cad administrative building and water proofing on roof of ig office, ofd and mp board office in cad administrative building dadabari, kota for year 2025-26
Tender For supply of paint pre-treatment primer(etching primer) colour- red oxide(no. 446) to is: 5: 2004 type spraying to , paint priming chlorinated rubber type spraying to specn. def stan-80-72/3, colour red oxide (no. 446) , paintfinishing chlorinated rubber type spraying to specn. def stan-80-72/3, colour deep bronze gree
Tender For name of work : providing 7 no of works in therkku kalugumalai panchayat - providing cc road with drainage (42m) at 2nd north street in kooladevanpatti village at therku kalugumalai panchayat, earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per ss 20b, cement concrete 1:4:8 mix using 40mm iss hbg metal including all cost and conveyance and all labour charges etc., complete, centering charges for pcc works including all cost and conveyance all materials to site etc., complete., cement concrete 1:3:6mix using 20 mm iss hbg metal including all cost and conveyance and all labour charges etc., complete, plain cement concrete 1:2:4 (one cement, two m.sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers., plastering with cement mortar 1:5 (one cement and five m.sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers., construction of cremation shed at samathuva burial ground in koolaidevanpatti village at therkukalugumalai panchayat, earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,, cement concrete 1:4:8 mix using 40mm iss metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum., cement concrete 1:2:4 mix using 20mm iss metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum, refilling the basement with excavated earth other than sand complying the standard specification, collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard specifications, brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete for 10cum, supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for r c c column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete., supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all r.c.c works including cost and conveyance of all materials to site, reinforced cement concrete 1:1.5:3 mix using 20mm iss metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum., dadooing of walls with white glazed tiles of size 15 cm x15cmx6mm laid in cm 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10sqm., plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm., plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm., exterior emulsion painting two coats with best approved quality and colour paint over one coat of base c
Tender For corrigendum : tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk , dalmiya under job no 2503 op bc bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric wt.as per store list att , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 8mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 10mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 12mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie make-tata , sail , jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite , dr fixit , fevicol , quick setting compound make-pidilite , fevicol , quick fix , cement based paint snowcem make-berger , asian , nerolac , oil bound distemper washable quality of proprietary brand of make-nerolac , berger , asian , birla white wall care putty water resistant white cement make-nerolac , berger , asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer specification as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix , jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5-2004 make-berger , asian , nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal , hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame make-jindal , hindalco aluminium as per store list att , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed make-jindal , hindalco aluminium section weig
Tender For corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold, ambuja,ultratech,acc,jk,dalmiya under job no 2633 ug comd bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 maketata,sail,jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric as per store list attached , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 8mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 10mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 12mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie maketata,sail,jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite,dr fixit, fevicol , quick setting compound makepidilite,fevicol,quick fix , cement based paint snowcem make-berger,asian,nerolac , oil bound distemper washable quality of proprietary brand of makenerolac,berger,asian , birla white wall care putty water resistant white cement make-nerolac,berger,asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer and as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix,jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5- 2004 make-berger,asian,nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal,hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame of size 1000mm x 1000mm including all as per store list attached , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed as per store list attached , ms anchor bolt, suitable for rcc work, 12mm dia, 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm