Latest painting equipment Tenders | Government painting equipment Tenders

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

Central Government/Public Sector

CTN :45546948

02 Jul, 2026 NA

Mysore - Karnataka

Tender For corrigendum : supply of high pressure hose suitable for application of high viscous paints such as p u paints, high build epoxy paints, fluoropolymer (fluoroethylene) paints, enamel paints, primer paints, etc. material type: core polyamide reinforced cover polyurethane blue colour suitable for application of heavy duty airless spray painting equipment having 420 bar to 480 bar pressure. for chemical resistance to solvents and aggressivefluid along with suitable connector as per annexure-i in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or wagner only.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45604805

26 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coated with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm+/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capable of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertical position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tape and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the tape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place whilepaint applications inside the painting booth where automated spray painting operations are carried out using high pressurespray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condition 2) ten numbers shall be supplied as sample for conducting suitability tests. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45453454

30 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply, installation & commission of heavy duty airless spray painting equipment type rhino 70.150 or similar, suitable for marine paint application, high build epoxy paints, mio, zinc silicate, p.u. paints etc. consisting of the following items as mentioned in annexure-i and one set of maintenance spares required for pump rhino 70.150 or similar as mentioned in annexure-ii in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or equivalent as per technical specification annexure-i and annexure-ii. [ warranty period: 30 months after the date of delivery ] ]

CTN :45454090

30 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply, installation & commission of heavy duty airless spray painting equipment type rhino 70.150 or similar, suitable for marine paint application, high build epoxy paints, mio, zinc silicate, p.u. paints etc. consisting of the following items as mentioned in annexure-i and one set of maintenance spares required for pump rhino 70.150 or similar as mentioned in annexure-ii in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or equivalent as per technical specification annexure-i and annexure-ii. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45184191

15 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coated with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm+/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capable of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertical position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tape and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the tape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place whilepaint applications inside the painting booth where automated spray painting operations are carried out using high pressurespray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condition 2) ten numbers shall be supplied as sample for conducting suitability tests. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45199569

08 Jun, 2026 NA

Multi City - Multi State

Tender For supply of spares for ht & lt system, flood, drainage and dewatering sump", - closing coil 110vdc (for 11kv hwx vcb), tripping coil 110v dc (for 11 kv hwx vcb), agni motors bangalore-, 91type:sg301s1 v: 220ac/dc w:150 a:1.6 rpm: 100 i.cl: f duty: s2-5 min, vaccum interrupter (vg2, for 11kv hwx vcb), epoxy body (for 11kv hwx vcb), 11kv hwx mechanism. with (110v dc coil & 230 v motor), 11kv gang operated (go) switch, 11kv 120 mm². straight through jointing kit., 11kv 120 mm² termination kit, 11kv 240 mm². straight through jointing kit., 11kv 240 mm². termination kit., hdz-70-401, she 48.131.370-05 s2:8 5, ac230-240v 50-60hz 380 w, 5000r/min 6.0 a,, closing coil (110v dc, hvx-o, 33kv vcb), tripping coil (110v dc, hvx-0, 33kv vcb), service & test position limit switchs, (hvx-0, 33kv vcb), camp, disc complete (hvx-0, 33kv vcb), spring charging drum assembly ((hvx-0, 33kv vcb), rack-in & rack-out screws (hvx-0,33 kv vcb), 33kv gang operated (go) switch, 33kv 240 sq mm. straight through jointing kit., 33kv 240 mm². termination kit., single phase surge arrest, 9kv, 10kv, float switch (level sensor) with cable, mounting screw and termanal box 16(8) a 250 v, t-80, pressure gauege 0-16 kg/cm³ en-837-1, power contactor mo 250, 250a, 3p, 240v ac coil, aux 2no+2nc contacts, mccb, with magnetic release mccb, with magnetic release dsine dn3-630m 630a, 3p 50ka, 415vc,, power contractor mnx250 250a, 3p, 240vac coil, aux 2no+2nc contacts, power contractor with 240vac coil mnx650 650a, 3p, 240vac coil, aux 2no+2nc contacts., power contractor with 240vac coil mnx300 300a, 3p, 240vac aux 2no+2nc contacts, power contractor with 240vac coil, mo110, 110a, 3p, power contractor with 240vac coil, aux 2no+2nc contacts, rto-4, 72-110a bimetal overload relay, direct mounting (class 10), 1no+1nc auxiliary contacts with build in spp (single phasing protection), bimetal overload relay mn12 135-255a bimetal overload relay, direct mounting (class 10), 1no+1nc auxiliary contacts with build in spp (single phasing protection), bimetal overload relay mn12 180-300a bimetal overload relay, direct mounting (class 10), 1no+1nc auxiliary contacts with build in spp(single phasing protection), 6a control fuse link 415v ac, type: pq8n ch2j 1myn563613-ead tripping relay (86) flush mounting, case size 1/2, contacts 4no+3nc hr with hr flag aux volt 220 v dc, tripping coil, mo1 220-250v dc/ac, eq96 moving iron ammeter: range: 0-500a 500/1a, 250/1a, 50hz., thermostat bater cord 20-17 15a, 250v, 50hz., relay cr-m220vdc 4 1svr405613r9000, panel door handle 11kv, station auxilliary board dyear), mccb operating handle ohg45h9k handle, shunt open. release, 220/240v e1/6-t8, led panel light om-x, 3/5w/230v, omega, omo 10 33kj o resistor 33k/10w, 5%-with bakelite, power pack with battery backup input: 230vac, output: 220v dc, 0.5a, fuse 3a, slow blow for power pack, supply:230vac, 24vdc,, electronic magnetic flow meter line size: 200nb output:4-20ma, 2-7000lpm, max.w. p: 16kg/cm³, alarm range: 0-

CTN :44751584

07 Apr, 2026 NA

Mysore - Karnataka

Tender For supply of painting equipment s and other consumable items at bnpm premises, mysore. heavy duty burnishing polishing machine with , non-woven for metal, wood, rust removing , electric surface polisher with accessories , angle grinding machine , handheld pneumatic belt sander , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 320, fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 220, fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 36, rough) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 60, rough) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 80, medium) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 120, medium) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 400, very fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 600, very fine) , wire tar brush set for drill 5 pcs brass steel , rotary brush wheels cup brush, wheel brush, end b , non-woven 6 x 2 inch (150mm x 50mm) abrasive flap wheel , non woven spindle mop wheel 50x50x6mm with 6 mm shaft 5pcs , non woven spindle mop wheel 50x25x6mm with 6 mm shaft 5pcs , non woven spindle mop wheel 25x25x6mm with , 6 mm shaft 5pcs , dry wall sander