Latest painting equipment Tenders | Government painting equipment Tenders

Central Government/Public Sector

CTN :45546948

02 Jul, 2026 NA

Mysore - Karnataka

Tender For corrigendum : supply of high pressure hose suitable for application of high viscous paints such as p u paints, high build epoxy paints, fluoropolymer (fluoroethylene) paints, enamel paints, primer paints, etc. material type: core polyamide reinforced cover polyurethane blue colour suitable for application of heavy duty airless spray painting equipment having 420 bar to 480 bar pressure. for chemical resistance to solvents and aggressivefluid along with suitable connector as per annexure-i in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or wagner only.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45604805

26 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coated with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm+/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capable of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertical position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tape and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the tape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place whilepaint applications inside the painting booth where automated spray painting operations are carried out using high pressurespray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condition 2) ten numbers shall be supplied as sample for conducting suitability tests. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45602290

09 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of countersink bit - 3 flute, csk bit with integrated pilot, body dia 10 mm, oal 33 to 37 mm, thread m6x1, countersink bit dia 3.0 x 90 deg, material m42, pilot dia 3.0 mm, body dia 10 mm, oal 33 to 37 mm, 3 flute, csk bit with integrated pilot, body dia 10 mm, oal 33 to 36 mm, thread m6x1, countersink bit dia 4.0 x 90 deg, 3 flute, csk bit with integrated pilot, angle 90 deg, countersink bit dia 5.0x90 deg, material m42, body dia 12 mm, body dia 14 to 16 mm, pilot length -7 to 10 mm, angle 90 deg, centric cone of cutter-120 deg, material m42, pilot dia 8.0 mm, oal 35 to 40 mm, thread m8x1, countersink bit dia 2.7x120 deg, material m42, csk bit with integrated pilot, pilot dia 2.7mm, pilot length 7 to 10 mm, angle 120 deg, centric cone of cutter-120 deg, countersink bit dia 5.0x90 deg, 3 flute, material m42, csk bit with integrated pilot, pilot dia 5.0 mm, body dia 12 mm, pilot length 10 mm, oal 37 mm, angle 90 deg, thread m8x1, centric cone of cutter-120 deg, countersink bit dia 6.0x90 deg, 3 flute, material m42, csk bit with integrated pilot, pilot dia 6.0 mm, body dia 14 to 16 mm, pilot length -7 to 10 mm, oal 35 mm, angle 90 deg, thread m8x1, centric cone of cutter-120 deg, countersink bit dia 8.0 x 90 deg, 3 flute, material m42, csk bit with integrated pilot, pilot dia 8.0 mm, body dia 20 mm, pilot length 7 to 10 mm, oal 35 to 40 mm, angle 90 deg, thread m8x1, centric cone of cutter-120 deg, countersink bit dia 2.7x120 deg, 3 flute, material m42, csk bit with integrated pilot, pilot dia 2.7mm, body dia 10 mm, pilot length 7 to 10 mm, oal 35 mm, angle 120 deg, thread m6x1, centric cone of cutter-120 deg, countersink bit dia 3.0x120 deg, flute, material m42, csk bit with integrated pilot, pilot dia 3.0 mm, body dia 10 mm, pilot length 7 to 10 mm, oal 35 mm, angle 120 deg, thread m6x1, centric cone of cutter-120 deg, countersink bit dia 4.0 x 120 deg, flute, material m42, csk bit with integrated pilot, pilot dia 4.0 mm, body dia 10 mm, pilot length 7 to 10 mm, oal 33 to 37 mm, angle 120 deg, thread m6x1, centric cone of cutter-120 deg, countersink bit dia 5.0 x 120 deg, flute, material m42, csk bit with integrated pilot, pilot dia 5.0 mm, body dia 12 to 14 mm, pilot length 7 to 10 mm, oal 33 to 40 mm, angle 120 deg, thread m8x1, centric cone of cutter-120 deg, countersink bit dia 6.0 x 120 deg, flute, material m42, csk bit with integrated pilot, pilot dia 6.0 mm, body dia 14 to 16 mm, pilot length 7 to 10 mm, oal 33 to 40 mm, angle 120 deg, thread m8x1, centric cone of cutter-120 deg, countersink bit dia 8.0 x 120 deg, 3 flute, material m42, csk bit with integrated pilot, pilot dia 8.0 mm, body dia 20 m, pilot length 7 to 10 mm, oal 35 to 40 mm, angle 120 deg, thread m8x1, centric cone of cutter-120 deg

CTN :45453454

30 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply, installation & commission of heavy duty airless spray painting equipment type rhino 70.150 or similar, suitable for marine paint application, high build epoxy paints, mio, zinc silicate, p.u. paints etc. consisting of the following items as mentioned in annexure-i and one set of maintenance spares required for pump rhino 70.150 or similar as mentioned in annexure-ii in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or equivalent as per technical specification annexure-i and annexure-ii. [ warranty period: 30 months after the date of delivery ] ]

CTN :45454090

30 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply, installation & commission of heavy duty airless spray painting equipment type rhino 70.150 or similar, suitable for marine paint application, high build epoxy paints, mio, zinc silicate, p.u. paints etc. consisting of the following items as mentioned in annexure-i and one set of maintenance spares required for pump rhino 70.150 or similar as mentioned in annexure-ii in the make: - vr coatings or tiger or graco or kremlin or jaguar or pilot or equivalent as per technical specification annexure-i and annexure-ii. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45184191

15 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coated with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm+/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capable of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertical position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tape and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the tape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place whilepaint applications inside the painting booth where automated spray painting operations are carried out using high pressurespray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condition 2) ten numbers shall be supplied as sample for conducting suitability tests. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45044993

21 May, 2026 NA

Bangalore - Karnataka

Tender For supply of nut plate drill motors : : - 405599066287 nut plate drill motor , 405599066384 additional accessories , 405599066481 drill cum countersink cutter , 405599066578 nut plate drill motor , 405599066675 additional accessories , 405599066772 drill cum countersink cutter , 405599066869 nut plate drill motor , 405599066966 additional accessories , 405599067063 drill cum countersink cutter

Central Government/Public Sector

CTN :40903234

11 Apr, 2026 NA

Vellore - Tamil Nadu

Tender For bid to ras supply of countersink cutter dia 25 x 60 deg , countersink cutter dia 31.5 x 60 deg , countersink cutter dia 40 x 60 deg , countersink cutter dia 50 x 60 deg , countersink cutter dia 63x 60 deg

CTN :44751584

07 Apr, 2026 NA

Mysore - Karnataka

Tender For supply of painting equipment s and other consumable items at bnpm premises, mysore. heavy duty burnishing polishing machine with , non-woven for metal, wood, rust removing , electric surface polisher with accessories , angle grinding machine , handheld pneumatic belt sander , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 320, fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 220, fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 36, rough) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 60, rough) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 80, medium) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 120, medium) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 400, very fine) , spindle mop wheel 50mm x 25mm x 6mm 5pcs (grit no 600, very fine) , wire tar brush set for drill 5 pcs brass steel , rotary brush wheels cup brush, wheel brush, end b , non-woven 6 x 2 inch (150mm x 50mm) abrasive flap wheel , non woven spindle mop wheel 50x50x6mm with 6 mm shaft 5pcs , non woven spindle mop wheel 50x25x6mm with 6 mm shaft 5pcs , non woven spindle mop wheel 25x25x6mm with , 6 mm shaft 5pcs , dry wall sander