Latest photo fluorometer Tenders | Government photo fluorometer Tenders

Central Government/Public Sector

CTN :41669684

23 Sep, 2025 NA

East Singhbhum - Jharkhand

Tender For annual repair and maintenance of 500 mm dia di pipeline from kharkai to turamdih : : - patrolling or inspection of di pipe line for checking leakage detecting from intake well cum pump house to turamdih area where pipe line exists with technical persons minimum one fitter with transport facility daily and including tightening of nuts and bolts where ever required for rectification of leakages observed during routine inspection. , attending as and when required major breakdown or rectifying leakage of di pipe line including fixing of necessary mechanical joint and all accessary within twelve hours information or notice for rectification till the resumption of the service including labour charges equipment tools and tackles but excluding cost of materials etc , overhauling charges of valves including change of gland packing if required with all labour charges for joints for following sizes of gate or sluice valve or butterfly valves for four hundred mm dia , overhauling charges of valves including change of gland packing if required with all labour charges for joints etc for following sizes of gate or sluice valve or butterfly valves for five hundred mm dia. , repairing of air valves including charges of float ball with all labour charges tools and tackles , earth work in excavation in trenches or drains including dressing saides and ramming of bottoms lift upto one point five metre including getting out the excavated soil and disposal of surplus excavated soil as directed all kinds of soil , return earth filling by available excavated earth excluding rock i trenches plinth sides of foundation etc in layers not exceeding twenty cm in depth consolidating each deposited layer by ramming allow for breading up lumes shrinkage etc watering lead upto fifty metre and lift upto one point five metre complete as directed by the eic. , clearing jungle including uprooting of rank vegetation grass bush wood trees and saplings of girth upto thirty cm measured height of one metre above ground level and removal of rubbishe upto a distance of fifty metre outside the periphery of the area cleared. , surface dressing of the ground including removing vegetation and in equalities not exceeding fifteen cm deep and disposal rubbish lead upto fifty metre and lift upto one point five metrea all kinds of soil. , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete , providing and laying in position cement concrete of specifieda grade excluding the cost of centering and shuttering all work up to plinth level one cement isto three coarse sand six graded stone aggregate twenty mm nominal size. , rcc work below and above plinth level up to floor five level one cement isto one point five coarse sand isto three graded stone aggegate twenty mm nominal size is to be provided. , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete. , centering and shuttering including strutting propping and removal of form for all heights. , 15mm thick cement plaster on rough side of single or half bricke wall of mix one cement isto six coarse sand to be provided. , neat cement punning , supply at site laying jointing including gasket nut bolts all complete miscellaneous di fittings like di bend mechanical joint tee gland packing all item as per is9523 for four hundred or five hundred mm dia di specials with spigot and flange combination like bend tee of class k12 suitable for push on jointing as per is9523 pipe all complete.

CTN :41712231

15 Sep, 2025 NA

Sealdah - West Bengal

Tender For supply of borescope - inspection equipment (q3)

Central Government/Public Sector

CTN :41666743

29 Sep, 2025 NA

Noida - Uttar Pradesh

Tender For procurement of acv auxiliary ard-25 spares - equipment: ac system, make / model:- sutrak carrier / tm 31 hd, primary filter- metal bowl, control cable series 40 (port) 28.0mtr, 4280 mm propeller pitch hose assembly 6. fittings @, 6800 mm propeller pitch hose assembly 5, fuel shut-off cable 24 mtrs, control cable series 40 (stbd) 24.5 mtr, hydraulic fluid low with plug and socket (electrotec), level sensor nmea 2000 3281-0321mm, out board strip 1, flexible exhaust link, standard closed segment, fwd landing skid rubber mount, filter drier, equipment: cpp system, make / model:- ghl uk, st/st rod end rh male m16 gar hw16rr, balanced steering cylinder kit 7065, 3010 mm propeller pitch hose assembly 4, 3220 mm propeller pitch hose assembly 1, long arm riveting plier, line mounted relief valve-rv10 26c3b n 15, taperlock bush aft lift fan (55mm dia) 3525-55, propeller layshaft bearing sleeve nut and tab washer, plumber block lip seal, key 18x10, key 20x12, key 18x11, transmission pulley, 6850 mm propeller pitch hose assembly 9, 4550 mm propeller pitch hose assembly 3, 1570 mm hose assembly 1. fittings @ 90 degree, 1520 mm hose assembly 3. fittings @ 110 degree, 2270 mm propeller pitch hose assembly 2, 1170 mm steering hose assembly 6, 1570 mm steering hose assembly 7, sleeve (h2313 ), eriks tpe r seal (85x120x12) 316 st/st, lock washer(mb13), 22313ek skf bearing, dowty seal 1/2" st/st, equipment:- deck / hull / skirt, sikaflex gun skeleton m301-075, rivet alum 4.8 x 19 mm, pop rivet alum 3.2 x 9.7mm, pop rivet 4.8 x 10mm/ 5 mm big head rivet/ rivets pop 4.8mm (ad66sb ), screw csk posi a2, nut/ nylock nut m6 a2/ m6 nut nylone, washer m6 penny a2/ m6 penny washer, standard craft tool kit, hull emergency repair kit contains: 1xalum sheet 2mm, standard open segments, skirt emergency repair kit, 4130 mm skirt shift assembly 4. bulkhead ram.stbd (h0021807), inboard 4mm cheveron strap, hose assly 3/8"(360 mm skirt shift hose), hose assly 3/8"(370 mm skirt shift hose), metal oval hatch, rapid link 14mm large mouth, hose assly 3/8" (240 mm skirt shift hose assly 7 valve-valve (h0021810), hydraulic cyclinder seal kit skirt system, d shackle 20mm ed621120, strop matrix inboard 5+f68mm (red), strop matrix inboard 4mm (red), round inspection hatch/ plastic round hatch, strop matrix outboard 4mm (black), rope strop 7/8 870mm, cold skirt bonding agent, strip shackle 8mm, d shackle 8mm, nut cap nylon 1/2" 05500 13cn, bridge plate, strop matrix outboard 5mm (black), vetus ufo stainless deck ventilator, skirt shift matrix assembaly, outer loop, inner loop, rivet alum pop, washer m8, m10 washer form b, rudder, elevator blade, 2830 mm skirt hose assembly 1. bulkhead - ram. port(h0021804), starboard inboard rudder, tie rod long, tie rod feedback, tie rod short, temperature switch, rod end m 12 (sme 45.12), rod end m8, inboard 5mm chevron strop, hose clamp, 8mm key pin shackle, 8mm bow shackle, equipment: lift fan, make / model :- ghl uk, shaft lift fan, fwd lift fan bearing, taper lock bush3020x50, washer spring m12, screw m12x30, taper lock bush 75 mm bore, bolt m8 x 25 hex hd a4, drive belt 14mgt-1610, aft lift fan bearing, lift fan shaft seals - aft, equipment:- steering, make / model:- accu steer hm-260, emergency steering hydropack, equipment:- electrical, make / model:- accu steer hm-260, strip led, orange beacon, light stern with assy/3541002 24v, light starboard side 24v 3541002(green), spare bulb, bulb (flap switch)en507026, spare bulb 02-90400006, essential supply isolator 24 v dc coil albright sw80-1907, canbus cable can-201

CTN :41653794

06 Sep, 2025 2.49 Lacs

Chungthang - Sikkim

Tender For construction of high altitude hill road to indo china border from muguthang (altitude 14832 ft) to 20r (altitude 15331 ft) having length 12.42 km in the state of sikkim under phase-ii (epc mode-iii) sh providing services of diesel inspection (scorpio, harrier or equipment) vehicle for executive engineer, brpd-i, cpwd, chungthang, north sikkim.

Central Government/Public Sector

CTN :41379127

08 Sep, 2025 1.08 Crore

Noida - Uttar Pradesh

Tender For corrigendum : etc works of 765kv ais pgcil raichur extn. substation includes receipt of equipment/material at site, unloading, inspection, verification, storage, up-keeping etc. at 765kv ais pgcil raichur extn. substation in karnataka

Central Government/Public Sector

CTN :41638998

26 Sep, 2025 2.27 Lacs

Dakshina Kannada - Karnataka

Tender For providing of custom bid for services - inspection testing certification of the mobile equipment eot cranes hoists and pressure vessels air receiver tanks including tools and tackles of all department of pellet plant unit and blast furnace unit kiocl limited pana..

Central Government / Public Sector

CTN :41655912

15 Sep, 2025 NA

Haldia - West Bengal

Tender For custom bid for services - 9040c25d03 annual rate contract for in situ machining of various equipments at haldia refinery-00010 cme10051xx in-situ flange machining of flanges (all types) charges to carry out in situ machining of gasket face flanges (all types of flanges) of heat exchanger/ pipe/ pipe fittings/ column manhole/ reactor manhole/ vessel manhole/ or any other equivalent equipment with skilled manpower & suitable equiment/ machinery. job includes supplying of all types of tools and tackles, jigs and fixtures, lifting arrangements, electrodes, welding equipment, pmi machine, machineries, all consumables, labour etc. and supervision to complete the work in all respects as per drawings and direction of the engineer-in-charge, including area preparation, taking clearance for hot jobs, area cleaning after completion of work, flushing wherever required. the scope includes all necessary jobs (including weld buid up) required to restore the flange face finish as per asme b16.5/ b16.47 as per drawing specifications. the machined surface flatness and/ aarh, as applicable, is to be maintained as per prevailing codes and standards. contractor to identify the flange metallurgy for electrode selection required for weld build up. contractor has to execute weld build up jobs under the inspection of inspection department iocl refinery. after completion of work, the flange has to pass through pressure testing. unit of measurement "inch-dia" denotes inch-dia of the circular / oval flanges. in case of oval flanges, the measurement highest flange dia of a particular flange will be considered., 00020 cme1005101 in-situ flange machining of flanges (all types), 00030 cme1005102 mobilisation and demobilization charges, 00040 1,856,238.- round the clock/ shutdown factor: for shutdown/ breakdown/ emergency jobs, where the jobs are required to be continued round the clock, a multiplication factor of 25% shall be adopted on rfq item 10 comprising of m&i common mechanical, instrumentaion & electrical sor items (item nos. starting with cme, cin & cel)., .

Central Government And Public Sector

CTN :41659790

23 Sep, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of borescope - inspection equipment (q3)

Central Government/Public Sector

CTN :41602303

06 Sep, 2025 NA

Angul - Odisha

Tender For supply of supply and supervision of e&c of utm (paut) as per specification , supply and supervision of e&c of tofd equipment for weld inspection

CTN :41602749

08 Sep, 2025 70.0 Thousand

Kolkata - West Bengal

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - electrical; periodic inspection and testing of electrical installations including vcbs transformers acbs etc; any other government approved labs /service providers

Photo Fluorometer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector