Latest pier Tenders | Government pier Tenders

State Government

CTN :45497851

16 Jul, 2026 65.31 Crore

Jabalpur - Madhya Pradesh

Tender For corrigendum : construction of viaduct with pile foundation, rcc pier, rcc or psc girder and reconstruction of re wall with the replacement of backfill and ground improvements in the remaining approaches of rob at km 28.200 in the jabalpur to hiran river section of

Central Government/Public Sector

CTN :45719626

18 Jul, 2026 40.00 Lacs

Jodhpur - Rajasthan

Tender For repair/ replacement of lt cable, lt panel and connected items in domestic area (excluding camp area), su site 1a and 1b at af stn jodhpur - excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and getting out in soft/ loose soil complete all as specified and directed., returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil.complete all as specified and directed., removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in any type of soils.complete all as specified and directed., m&l for sand cushioning for xlpe cable with tibba sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) and punning down to 180mm to provide a required cover complete all as specified and directed by the engineer-in-charge.note:- punned thickness only shall be measured and paid., m&l for protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class b bricks complete all as specified and directed by engr-in-charge., supplying and laying un-reinforced precast concrete cable cover, class lv, type i, flat, size 250mm x 150mm x 40mm confirming to is - 5820 complete all as specified and as directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm, 4 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm, 4 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm, 4 core laid in gi pipe complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 95 sqmm, 3.5 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 150 sqmm, 3.5 core complete all as specified and directed., supply and laying of xlpe insulated, armoured, heavy duty, electric cable, laid in ground with aluminium conductor, 1100 volts grade, cross-sectional area 240 sqmm, 3.5 core complete all as specified and directed., taking down of lt cable any size from trech/ gi pipe/ walls/ on ground/ street light poles complete all as specified and directed., m&l for boring of holes under road, pavement, hard stansding by using manual method with 100mm hdpe pipe complete all as specified and directed by engineer-in-charge., s&f in repair mccb 400 amp, 4 pole, 415 v, 36 ka, thermal megnatic adjustable type complete all as specified and directed., s&f in repair mccb 250 amp, 4 pole, 415 v, 35 ka, thermal megnatic adjustab

Central Government/Public Sector

CTN :45709761

02 Jul, 2026 NA

Bangalore - Karnataka

Tender For rfq for upgradation of restrooms at t1 east pier

Central Government And Public Sector

CTN :45710683

04 Jul, 2026 3.96 Lacs

Dhanbad - Jharkhand

Tender For installation mtbm, tbm, rcc gauge post and painting/marking of gauge on bridge pier/gauge post at various sites under ubsd, cwc, maithon

CTN :45687131

07 Jul, 2026 5.03 Lacs

Cuttack - Odisha

Tender For repair to bridge over river rana on bilipada talabasta road_road_repair of abutment, pier shaft and deck slab bottom._at 0.600 km

Central Government/Public Sector

CTN :45697275

16 Jul, 2026 44.90 Lacs

Uttarakannada - Karnataka

Tender For comprehensive maintenance of drainage pumps, high/ low trade waste water pumps and water supply cope point at pier-1 nsry including connected allied work in tunnel services at nsry of naval base area karwar

CTN :45646671

06 Jul, 2026 40.00 Lacs

Kanpur - Uttar Pradesh

Tender For supply, installation, testing and commissioning of children s play equipment complete with foundation works, anchoring and allied civil works - hopping see saw area : 2.0 m x 0.5 m height : 1.0 meter leg support : 60mm odms hand railing : 32mm odms base : ms angle 35 x 35x 5 paint &coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible., frp pyramid swingarea : 3.0 m x 4.6 m height : 3.96 meter top bar : 60mm/ 75mm/ 90mm odms leg support : 60mm/ 75mm/ 90mm odms horizontal support : 32 mm odms swing seats : 2 nos frp seat 5mm thick accessories : 4 nos. swing clamp / gi chain 8mm paint & coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible, bike riderarea : 0.75 m x 0.3 m height : 0.75 meter stand : 90mm odms single pole handle : 25mm odms seating arrangement : ply with frp lamination movement &balancing : big spring. base plate : ms square plate 7 x 7 5mm paint &coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible., orbit climberarea : 2.4 m x 1.2 m height : 2.4 m vertical support : 60mm odms ladder : 25mm odms globe : 40mm odms inner frame : 32 mm odms paint & coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible, rotary thrill mgrarea : 1. 5 m diameter total height : 1. 0 m foundation pipe : 40mm odms centre pipe : 60mm odms connecting support : 32mm odms handle : 25mm odms seats : frp seats 3 mm thick bearing : heavy duty ball bearing (6312) paint & coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible, twister climberarea : 2.1 m x 2.4 m height : 2.1 m center support : 90mm odms vertical support : 40mm odms outer frame : 48 mm odms loops frame : 32 mm odms paint &coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible., small mgr platformarea : 1. 2 m diameter total height : 1. 0 m foundation pipe : 40mm odms centre pipe : 60mm odms outer frame : 32mm odms handle : 25mm odms base & seats : ms sheet 18 gej bearing : heavy duty ball bearing (6312) paint & coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible, duck mgrarea : 1. 5 m diameter total height : 1. 0 m foundation pipe : 40mm odms centre pipe : 60mm odms connecting support : 32mm odms handle : 25mm odms seats : frp duck - 4 nos. bearing : heavy duty ball bearing (6312) paint &coating :2 layers of reputed make paint or oven baked powder coating whichever is feasible., mountain climberarea : 2.1 m x 2.1 m height : 3.0 meter leg support : 48mm odms outer frame ( rings) : 32 mm. odms paint & coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible, rubber belt arch swingarea : 3.0 m x 1.5 m height : 2.4 meter top bar : 60mm odms leg support : 60mm odms horizontal support : 32mm odms swing seats : rubber belt seats 9mm thick accessories : swing clamp / s hook / gi chain 8mm paint & coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible, frp slide 10 ft.area : 4.2 m x 0.6 m. safe area : 5. 2 m x 1.6 m. platform height : 1.5 m slide length : 3.0 m slide thicnkess : 5 mm leg support : 48 mm odms pipe ladder & railing : 20mm & 25mm odms ladder steps : 2 x 1 rectangle pipe sq. platform : 2 x 2 size made with ms sheet 18 guage & ms angle 25*25*3 support paint & coating : 2 layers of reputed make paint or oven baked powder coating whichever is feasible, excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and removing from the site., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, grubbing up tree trunk including of trunk portion protrruding over ground digging out roots. fillings holes and

State Government

CTN :45635221

29 Jun, 2026 90.47 Lacs

Multi City - Karnataka

Tender For balance work in construction of pier for gate hoisting arrangement including providing power supply for gate operation & lighting arrangement over barrage across tunga bhadra river near suguru village (phase-ii) (catwalk,electrification and roof shelter)

corporations/Associations/Others

CTN :45624168

19 Jun, 2026 3.67 Crore

Saran - Bihar

Tender For demolition of old superstructure & construction of new superstructure including overall maintenance + patch repairing of abutment, pier & pier cap demolition of old superstructure & construction of new superstructure of h.l rcc bridge over daha river in 27th km of chhapra-manjhi-darauli-guthni road in saran district. (re-tender)

State Government

CTN :45425137

29 Jun, 2026 6.86 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of miscellaneous tp hardware and consumable fitting/fixtures etc. for corrective maintenance to jmrc- non bsr items, aerolite 450gm (epoxy rash and hardner adhesive make, aralditel aerolibelloctite bondthe), anchor fastener (10 mm), anchor fastener (6 mm), angle valve/brass dish angle valve stainless steel fish, arabite tube (180 gms) ( rasin and hardner adhesive make, arabitel aeroliteloctite bondthe), bend nose pillers, big disc brass spindle 3/4", black screw 1 inch (500 pcs.), black screw 1.5 inches (500 pcs), professional rotary hammer drill machine (make:bosch gbh 2-26 re or equivalenti, brass spindle with rubber washer (04 no.), claw hammer, cp napple (1 inch), cp nipple (1.5 inch), cp nipple (2 inch), cpvc ball valves 3/4 inches, cpvc socket 314 inches, cpvc solvent (20 gm each), curtain pipe (wall and hanging support holder, cylinder 60mm godrej dorset, cylinder 70mm godrej dorset, danfoss solenoid valve coll, door doser gliding bar type, door stopper, doorset/podrej europrofile cylinder lock)(80 mm), double side tape, dr. fixft waterproofing super latex compound (1kg), electric extension board (10 mtr wire, 3 sockets), electrical tape (steelgro, 30pcs), fevlquick (20 gms) (grade 203), feviquick (20 gms) (grade 463), float switch, gaskit for windows/epdm rubber deal for windows, gil end plug (0.5 inch), glass fibre measuring tap 30 mtr. length, hammer ll bit (10 mm), hammer dirfll bit (12 mm), hammer drill bit 6mm, hammer drill bit 8mm, hasp staple (latch) (100 mm), hasp staple (latch)(80 mm), heavy duty stainless steel lock for glass door thickness 10 mm to 12 mm, hex head bell-drilling roof screws with rubber sealing washer 12x65mm (200 pcs.), holdtite (50 grm each), hydraulic door closer (131 mark), key hive locks (drawer lock), l patti (2 inch), metal disc cutter blade (04 inch), mortise lock 70mm complete, m-deal 90/100gm, nose pier, padlock, pipe wrench 18", pu dotted hand gloves (make udyog or equivalent), pvc green carpert mat 12mm thick 1200mm * 750m =, pvc safety gloves size large, pvic solvent (100 gm each), retro reflective tape 3m make (50 mr.), ro op nipple, round casting clip (100 pcs.), screw bit, screw driver, screw extractor set, self taping (hexahead) (02 inch) (100 pcs.), self tapping screw (6-8mm top dila) 13 mm, belt tapping screw (6-8mm top dia) 19 mm, delf tapping screw (6-8mm top dia) 25 mm, self tapping screw (6-8mm top dia) 38 mm, self tapping screw (6-8mm top dia) 50 mm, self tapping screw (6-8mm top dia) 75 mm, top dia) 6.35 mpm belf-tappling screw (6-8mm, bilding/telescopic ladder, small clisc brass spindle sqrt(2), stainless steel frameless clamp (both side screw arrangement) , steel measuring tap 5 mtr. length, stone cutter disc (04 inch), talon tape, thinner, todi bag, tower bolt (6 inch), transparent extra strong virgin mlcl sheet film tirpal (120 to 1:50 gdmx50x 30 feet), universal pvc cistern handle with rod, wall plug/bcrew git 38mm, wall plug/bcrew git (32 mm), wall plug/screw git (50mm), wall plug/screw git (70mm), waste pipe, water meter 1" (rahul make), water meter 2" (rahul make), wd-40 (400420m), zoloto 32 mm forged brass ball valve 10088 of 10 marked

Pier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors