Latest pipe lifter Tenders | Government pipe lifter Tenders

CTN :45513462

20 Jun, 2026 1.50 Lacs

Leh - Jammu And Kashmir

Tender For hla , thermostate valve , oil pump , vane pump , nut or bolt , coolant hose pipe , lifter , assy coolant pipe , pump gear , injector nozzle return pipe , turbocharger , assy kit lined shoe rear , air cleaner hose , air cleaner filter , field coil assy , bush carrier , clutch plate assy

Central Government/Public Sector

CTN :45394106

10 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For corrigendum : supply of vertical lever for bogie open discharge hopper wagon bobrn (bmbs) drg.no.wd-09065-s-73, item no-26. material as per drawing. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45494566

10 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of vertical lever for bogie open discharge hopper wagon bobrn (bmbs) drg.no.wd-09065-s-73, item no-26. material as per drawing. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45358463

11 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of repairing and internal cleaning of esp inlet & outlet flue gas ducts; repairing fd fan discharge ducts, air heater, and eco. ash hopper patching in u # 3 during coh at cstps

State Government

CTN :45353493

11 Jun, 2026 NA

Dapodi - Maharashtra

Tender For rate contract for supply of handpump set and spare parts - supply of handpump set and spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting rod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll), front cover, handle for deepwell hand pump (is: 15500 part 4), stand assembly telescopic for deepwell hand pump, ring spanner 17*18, crank spanner 17*18, i.s.i.marked deepwell handpump set (india mark ii) confirming to i.s.15500 completes with head & handle assembly,water tank,telescopic stand assembly,cylinder assembly along with 12 nos. of 12mm x 3 mtr. length ms electrogalvanised connecting rods made of bright bar and 12 nos.of hot dip galvanised riser pipes 32mm n.b. x 3 mtr. long fitted with socket (made from seamless pipe or machined bar & galvanised) at one end and thread protector at another end.charges etc complete

corporations/Associations/Others

CTN :45331868

25 Jun, 2026 NA

Parichha - Uttar Pradesh

Tender For providing of custom bid for services - rotation and replacement of 200nb and 300 nb ci and ms pipeline of esp hopper and bottom discharge line vacuum line ash slurry disposal line during overhauling of unit 4 210 mw btps parichha

State Government

CTN :45287473

28 May, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of spares of bottom ash hopper feed gate, hydro ejectors and liners for clinker grinder during u#8 aoh at ash handling plant cstps, chandrapur. - 85tph liner pn be1440d-01, 85tph liner pn be1440d-02, feeder ejector ayems inlet liners, slight glass assly size-3/4" n3922, hopper driplex inspection glass 220 mm, macawber beekay gland follower, bearing cover (1 set = 4 nos.) be1435d, bearing block (1 set = 4 nos.)be1434d, spur gear be1437d, shaft stuffing block be1431d, gate liner for door frame thick 24 mm, gate liner thickness 14 mm, fed gate side guide plate pn be5064d, fed gate flood light assly be3749d-02, complete feed sump assembly with liner, throat & discharge piece(be 3261d-03), fed gate bracket,pin &piston rod clevis, feed gate cylinder assy pn be4865d, feed gate tecpro sys power cyl seal set, ahp basys fdgate guide rail, fed gate lower wedge be1121d-b, fed gate upper wedge be1121d-a

CTN :45144252

26 May, 2026 10.00 Lacs

Shahdol - Madhya Pradesh

Tender For annual tender of supply of water supply materials - water supply material, g.i pipe 1 inch, g.i pipe 2.inch, g.i pipe 3 inch, g.i socket 1 inch, g.i socket 1.25 inch long, g.i socket 2.inch, g.i socket 2.inch long, g.i socket 3 inch, g.i elbow 1 inch, g.i elbow 1.25 inch, g.i elbow 2.inch, g.i elbow 3 inch, g.i tee 1 inch, g.i tee 1.25 inch, g.i tee 2.inch, g.i tee 3 inch, hdpe pipe 1 inch, hdpe pipe 1.25 inch, hdpe pipe 2 inch, hdpe pipe 3 inch, hdpe nipple 1 inch, hdpe nipple 1.25 inch, hdpe nipple 2 inch, hdpe nipple 3 inch, hdpe equle tee 1 inch, hdpe equle tee 1.25 inch, hdpe equle tee 2 inch, hdpe equle tee 3 inch, hdpe elbow 1 inch, hdpe elbow 1.25 inch, hdpe elbow 2 inch, hdpe elbow 3 inch, hdpe bend 1 inch, hdpe bend 1.25 inch, hdpe bend 2 inch, hdpe bend 3 inch, s.s. clamp with nut bolt, 2 inches, a.c. pipe 4 inches, washer no. 2 and 3, brass elbow 1/2 inch, brass elbow 1 inch, brass elbow 3/4 inch, raw rubber, cable 2.5 mm and 6 mm (national/kisan/texmo), connection cable 4 mm / armored - isi, connection cable 6 mm / armored - isi, pvc saddle clamp set for pipe connection 1 inch, pvc saddle clamp set for pipe connection 1.25 inch, pvc saddle clamp set for pipe connection 2 inch, pvc saddle clamp set for pipe connection 3 inch, ms saddle clamp set for pipe connection 1 inch, ms saddle clamp set for pipe connection 1.25 inch, ms saddle clamp set for pipe connection 2 inch, ms saddle clamp set for pipe connection 3 inch, hose clamp s.s. 1 inch, hose clamp s.s. 1.25 inch, hose clamp s.s. 2 inch, hose clamp s.s. 3 inch, pvc socket 1 inch, pvc socket 1/2 inch, pvc socket 3/4 inch, pvc valve 1 inch, pvc valve 1/2 inch, pvc valve 3/4 inch, pvc tee 1 inch, pvc tee 2 inches, pvc teflon tape, pvc gate valve 1 inch (kisan/texmo), pvc gate valve 1/2 inch (kisan/texmo), pvc gate valve 2 inches (kisan/texmo), pvc gate valve 3/4 inch (kisan/texmo), pvc elbow 1 inch (kisan/texmo), pvc elbow 1/2 inch (kisan/texmo), pvc elbow 2 inches (kisan/texmo), pvc elbow 3/4 inch (kisan/texmo), pvc casing pipe plain pipe 100 mm (kasta/kisan), pvc pipe 1 inch (kisan/texmo), pvc pipe 1/2 inch (kisan/texmo), pvc pipe 3/4 inch (kisan/texmo), pvc pipe 1.25 inch (kisan/texmo), pipe wrench 12 inches, pipe wrench 14 inches, pipe wrench 16 inches, pipe lifter 2.25 inches, pipe die 1.25 inch, panel board 15 hp three phase bentex (automatic), patti clamp 1 inch (isi), patti clamp 1.25 inch (isi), patti clamp 2 inches (isi), patti clamp 3 inches (isi), rubber ring 80 mm (isi) 3 inches, rubber ring 100 mm (isi) 4 inches, rubber ring 125 mm (isi) 5 inches, rubber ring 150 mm (isi) 6 inches, rubber seat packing, rod die, c.i. flange 2 inches, c.i. flange 3 inches, c.i. flange 4 inches, c.i. reducer tee 100x100 mm (isi), c.i. reducer tee 80x100 mm (isi), c.i. reducer tee 100x100x150 mm (isi), c.i. reducer tee 80x80x100 mm (isi), c.i. tee 100x100x100 mm (isi), c.i. tee 100x100x80 mm (isi), c.i. tee 150x150x150 mm (isi), c.i. tee 80x80x100 mm (isi), c.i. tee 80x80x80 mm (isi), c.i. tail piece 100 mm (isi), solvent, white cement, water tank 500 liters (syntex/kisan/texmo), water tank 1000 liters (syntex/kisan/texmo), vice handpump no. 4, chain pulley block 3 tons, nut and bolt, tail piece 2, 3, and 4 inches, gate valve 1 inch, gate valve 2 inches, gate valve 3 inches, gate valve 4 inches, gate valve brass 1 inch - isi, gate valve brass 1/2 inch - isi, gate valve brass 3/4 inch - isi, gate valve brass 2 inches - isi, gland rope, end cap pvc 1 inch, end cap pvc 1/2 inch, end cap pvc 3/4 inch, d joint ci 3 inches, d joint ci 4 inches, d joint ci 6 inches, hdpe d joint 2.5 inches, hdpe d joint 3 inches, hdpe d joint 4 inches, hand grinder machine 1600 watt bosch 5 inch, hand grinder blade 5 inch and 6 inch, hammer machine 1500 watt 26 mm bosch, breaker machine demolition 5 kg, fusing machine, sluice valve 50 mm, sluice valve 75 mm, sluice valve 90 mm, sluice valve 110 mm, tee 75 mm, tee 90 mm, reducer socket gi 1.25 inch-1.5 inch, reducer socket gi 2 inch -1.25 inch, r

CTN :45144287

12 Jun, 2026 30.00 Lacs

Chatarpur - Madhya Pradesh

Tender For purchase of handpump repairing material under municipal council chhatarpur - head assembly with handle complete (as per isi), head assembly without handle (as per isi), handle assembly complete (as per isi), water tank assembly (as per isi), stand assembly (as per isi), third plate (as per isi), g.i. riger pipe 32 m.m. isi medium b class (3 meter), g.i. riger pipe 32 m.m. isi haevy c class (3 meters), chain with cupling (as per isi), 32 mm g.i. pipe socket (as per isi), 12 mm connecting rod (as per isi) (3 meter), 12 mm connecting rod socket (as per isi), ci cylinder body only (as per isi), ci cylinder assembly with brass asseseries complete, plunger rod for cylinder, upper valve assembly complete brass (as per isi), lower valve assembly complete brass (as per isi), rubber seeting for upper valve (as per isi), rubber seeting for lower valve (as per isi), valve guide (as per isi), spacer (as per isi), brass sleep (as per isi), rubber washer (as per isi), seeling ring (cap packing) of nitric rubber (as per isi), ci reducer cap (as per isi), nut bolt for handpump (as per isi), chain nut bolt tvs (as per isi), bolt for cover (as per isi), spacer for rubber washer (as per isi), pipe lifter for 32 mm (as per isi), pipe wise 3 no. size (as per isi), pipe wise 2 no. size (as per isi), hand pump rod die set (as per isi), pipe die set 32 mm, 32 mm dia u.p.v.c. riser pipe, 32 mm c.i. adopter set for u.p.v.c. pipe, 12 " pipe wrentch (taparia/j.k./ ambika), 18 " pipe wrentch (taparia/j.k./ ambika), 24 " pipe wrentch (taparia/j.k./ ambika), 36" pipe wrentch (taparia/j.k./ ambika), 16x17 ring spainer, 18x19 fix spainer, screw wrentch (taparia), 6204 bearing, distance piece, hexa blade, hexa frame, pipe tools, 2 tonnes chain block, 3 tonnes chain block, handle axle, 5 tonnes chain block

CTN :45228398

30 May, 2026 NA

Birbhum - West Bengal

Tender For procurement of bottom ash and wet ash spares for overhauling of unit 3 under ahp mm - nozzle for air washer (dry for fly ash system size: 5 mm dia,for ahp-ii, nozzle with insert # tip dia 9 mm of insert,moc-ss 410 (nozzle),ceramic,hardness 7708 mohs,ahp-i# for 10in wetting head,make-dcips,pn-6,7, inlet section fr wetting head10" of ahpi ( one side bevelled and others side plain (b/p),after 90 degree 10" elbow for wetting head. moc: durite 450bhn ), adaptor for collector tank ( one side bevelled and others side flanged with holes. mat: durite 450bhn ), adapter b/b # for ahp-i,below wetting head# for collection tank ( both sides bevelled. mat: durite 450bhn ), tail piece after combining tube,ahp-ifor ba slurry line,make-dcips ( one side bevelled and others side plain (b/p),after combining tube. moc: durite 550bhn ), complete assembly of jet pulsion p/p moc: durite 550 bhn for body,ss-410 for nozzle tip,ceramic 7 moh min for nozzle insert,cap.-60 t/h,pr.-10 kg/cm2 for ahp-i, combining tube # dcips make-dcips,part no.-1,moc: durite,550 bhn,for ahp-i ( hydrostatic test pressure at shop: 9 kg per sq cm (g). ), drain pit jet pump,ejector type # complete assy with water inlet elbow,pipe with flange,bolts and nuts and foundation bolts ( discharge rate of 35 # 50 cubic mtrs. / hour, horizontal distance of 150 # 160 mtrs with an elevation of 10 mtrs from gound level (0.00 mtrs), sump volume : 45 cubic mtrs. one no. orifice for discharge line with each of ejector jet pump is required with other accessories. ), ba hopper,feed sump/chute for bottom ash hopper, nozzle # of seal trough,for ba hopper,ahp-i# for ba hopper,ahp-i ( nozzle with holder. ), inspection window assembly looking glass dia 224 mm th 12 mm for ahp-ifor ba hopper, inspection window glass,200m # ( moc: borosilicate glass. ), shaft sleeve for clinker grinder for make-ucc/dcips,pno. 15 moc ss 410, 350 bhn, for ahp-i, cambolt,nut,locknut # moc-ss 410(cambolt) heat treated to rc 32-34,metric m 20 coarse a2-70,is 1363 (nut# for ba clinker grinder ( 1set=32 nos 1. moc: ss-420 (cam bolt) heat treated to rc 32-34. metric m20 coarse a2-70, is 1363 (nut). 2. 01 set: ), packing gland follower # moc: bronze ltb-2 is 318,for ahp-1 ( for ba excen crusher 1. part no.-12 2. moc: bronze, ltb:2 is:318 ), labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips ( for ba excen crusher 1. part no.-13 2. moc: ms is 2062 gr-a. ), chain # no of link-118,for ahp-i ( for clinker grinder of ahp-i. no of link: 118. ), small size sprocket for ahp-1 bktpp for gear box,for ahp-i, packing gland housing # moc: ci fg 220 is: 210,for ahp-i ( for ba excen crusher 1. part no.-9 2. moc: ci fg 220 is: 210. ), slinger for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582 ( for ba excen crusher 1. part no.-14 2. moc: ms is 2062 gr-a. ), cam for clinker grinder # heat treated & normalised for ahp-i# for moc:hi chrome alloy with 22% to 27% cr, gate face of feed gate # moc-ss 316 for ahp-i ( moc: ss - 316. including m12x65, csk hd soc. cap bolt, nut, washer. ), adjustable seating wedge # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate. moc: ms, is: 2062 gr a. ), roller # moc-steel.is:1030 for-ahp-i ( for feed gate of ba crusher. moc: steel, is: 1030. ), gland follower for indicator rod dcips of feed gate, ahp-i, guide angle l.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), guide angle r.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), indicator rod # moc-s.s,size: 21mm dia.(solid) and 1400 mm long with both ends threaded and nuts,stg-i# for bottom ash hopper feed gate

Pipe Lifter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

State Government