Latest pipe union Tenders | Government pipe union Tenders

CTN :40819210

30 Jun, 2025 8.06 Lacs

Silvassa - Dadra And Nagar Haveli

Tender For providing and supplying furniture for type - v / c bungalow at tokarkhada - providing and supply of emerald leather-pure leather center tilt mechanism, upright position lock. ai die cast pedestal (office chair), providing and supply aristo tbl 1200 x 600 (office chair), providing and supply gayle coffee table black (teapoy), providing and supply victoria coffee table walnut, providing and supply 205 wicker outdoor sofa set (model no.gc-205), providing and supply 203 wicker outdoor sofa set, providing and supplying wicker swing (zula), providing laying artificial lawm(6 mm), supplying and stacking of good earth at site including royalty and carriage upto 5 km lead (earth measured in stacks will be reduced by 20% for payment)., providing mirror polish to wooden furniture, providing and fixing 5mm mirror glass with polish, providing and fixing 5 mm bracket for glass fixing, replacing of dining chair leather with labour charges, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead.(b) dence or hard soil, providing and laying cement concrete 1:3:6 ( 1-cement : 3- coarse sand : 6- hand broken stone aggregates 40 m nominal size) and curing complete excluding cost of framework in (a) foundation and plith, providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (a) foundation, footings, base of columns and mass concrete, brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:6 (1- cement : 6 -fine sand)(b) conventional + extra for brick work in superstructure above plinth level upto floor two level (b) conventional, providing 15mm thick cement plaster in single coat on rough (similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) cement mortar 1:3 (1-cement:3-sand), steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (a)in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like, providing corrugated g.i. sheet of class-3 roofing fixed with glavanished iron j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g.i. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and trusses.(1) 0.80 mm thick sheet., providing and fixing to wall ceiling and floor 10.0 kg. f/cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(g)110 mm, providing and supplying for washing machine as approved by and engineer in charge, providing and supplying for wooden box bed (king size) as approved by and engineer in charge, providing and supplying for mattras (ortho 6") as approved by and engineer in charge, providing and supplying for side table as approved by and engineer in charge, providing and supplying for pillow as approved by and engineer in charge

CTN :40794508

10 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of mod kit vehicular eqpt , driven disc , packing , pipe union union , gasket

Central Government/Public Sector

CTN :40754411

28 Jun, 2025 NA

Haridwar - Uttarakhand

Tender For supply of tees,equal aa7242308097 , bend 90 60.3x4 tp 1 w96413903678 , bend 90 degree gr 1 size 76.1x4 w96414900850 , bend 90 degree tp 1 size 139.7x2.6 w96415000020 , s.s.reducer pn40 size 33.7x21.3x2 w96415000446 , ss bend83.5deg,139.7x2.6,nb125 size nb125 w96415002740 , bend 90 deg. tp 1 size 33.7x2 w96415300288 , s.s.reducer pn40 size c21.3x13.5x2 w96415302590 , ss tee pn 40 size 137.7x139.7x4 w96415304054 , crosses equal aa7242315093 , ss bend 15 139.7x2.6 size 31500601090 w90415000955 , s.s.bend 86 deg.60.3x2.77 w96413508442 , bend 90 degree gr 1 size 48.3x3.2 w96413901683 , bend 90 degree gr 1 size 88.9x4 w96414900656 , bend 26 degree tp 1 size 139.7x2.6 w96415000055 , bend 90 degree gr.1 size 26.9x2.3 w96415300318 , neck pn40, var 01 w96415300563 , s.s.tee pn40 size 26.9x26.9x2 w96415302604 , ss reducer 139.7x4x114.3x3.6 w96415303260 , bend 90 degree tp 2 size 26.9x2 w96415000012 ) /bid number : gem/2025/b/6358377 * /dated: 18-06-2025 & & / bid document 1 / 35

CTN :40716645

25 Jun, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of supply of pipe fittings (elbow, tees, reducer, flanges, blind flanges and nut-bolt) as per annexure

CTN :40740265

08 Jul, 2025 16.98 Lacs

Lucknow - Uttar Pradesh

Tender For supply of elbow gi 15 mm , gate valve brass 20mm , plug gi 15mm , shower rose cp long arm 150x15mm , whb cp mixture brass 15mm , pvc lid for water tank 1000ltr , shower rose pvc 15 mm with arm , socket gi 20 mm , spindle brass for cp stop cock 15 mm , spindle stop cock concealed 15 mm , union socket gi 20 mm , angle valve two way cp brass , ball cock pvc 20 mm complete set , ball cock float with rod and valve 15 mm pvc , pillar tap pvc 15 mm , shower rose pvc 15 mm , spindle brass for cp bib cock 15 mm , spindle brass for pillar cock 15 mm , spindle brass for basin mixture 15 mm , spindle brass for angle valve 15 mm , stop cock concealed cp brass15 mm , elbow gi 20 mm , plug gi 15 mm , cl reducer bush 20x15 , cl ball valve 15 mm , cl ball valve 20 mm , elbow reducing 20x15 mm gi , long screw with gi nut 15x150 mm , long screw with gi nut 20x150 mm , tees gi equal 15 mm , tees gi equal 20 mm , tubing mg gi 25 mm , tubing mg gi 20 mm , union socket gi 15 mm , sluice valve 200 mm , sluice valve 250 mm , cl plug 25 mm , cl plug 40 mm , clamp ms 40x15 mm , cl ball valve 25 mm , elbow gi 25 mm , gate valve brass 25 mm , gi nipple 20x80 mm , gi nipple 25x80 mm , gl hexa nipple 15 mm , long screw with gi nut 25x150 mm , nipple gi 15x50 mm long , nipple gi 15x75 mm long , nipple gi 20x100 mm long , nipple gi 20x175 mm long , nipple gi 20x50 mm long , nipple gi 20x75 mm long , nipple gi 25x100 mm long , nipple gi 25x50 mm long , non return valve 15 mm , plug gi 20 mm , socket gi 15 mm , stop cock ci 15 mm , stop cock ci 20 mm , tee gi reducing 25x20 mm , tees gi equal 25 mm , tees gi reducing 20x15 mm , tubing gi 100 mm , tubing gi 50 mm , union socket gi 25 mm , gate valve brass 40 mm , tubing gi pipe mg 15 mm , tubing gi pipe mg 20 mm , elbow 40 mm , socket gi reducing 20x15 mm , socket gi reducing 25x15 mm , socket gi reducing 25x20 mm , elbow reducing 25x15 mm , tee joint 15 mm , sluice valve 80 mm , sluice valve 100 mm , sluice valve 150 mm

CTN :39403557

19 Jun, 2025 NA

Pune - Maharashtra

Tender For bid to ras tender for supply of z6 misc-172-79-002-sb conversion of charging unit , z6 r90 6145-020770 wire electrical positive , z6 r90 misc-3140-753-001-24 smd rework station , z6 r72 bk8-639-083 shock obsorver , z6 r72 bk8-652-347 pipe union , z6 r72 tpp-213-40-400 or 495073070148 transfor mer

CTN :38074933

05 Jul, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of vehs spares - n1 r90 4730-004918 52pt-412c.41-121 pipe union union , n1 r90 rus-t90-2a46m-02-28 extractor cam breach block assy , k9 t90s nbc ee4-073-009 screw driver , k9 t90s nbc 172-87-350a lever , x5 r90 tu16-77- ikaya 675 100 001tu incandescent lamp mn 36-0.12-1 , x5 r90 misc-tu16-535-553-79 a-28-40 bulb , z6 r90 175-29- 033 ring , lv1 r90 2540720353134 box for vision device tvn-5 , lv1 r90 5120720513003 extension pin drg no 172-91-879 , lv1 r90 9905720044202 plate 188- 11-033 , lv1 r90 5330720119332 gasket drg no-188-31- 257 , lv1 r90 5305720052477 screw 1-6x30.016 , lv1 r90 5120720511269 torque appliance drg no 219-93- sb196 , lv1 r90 4720016047 hose drg no 179-66-006 , lv1 r90 2590720308119 rack

CTN :40695546

23 Jun, 2025 47.24 Lacs

Kannur - Kerala

Tender For supply of materials for various works in mgnrega - various works under mgnrega, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator(needle type 40 mm), twisted steel/deformed bars, stone aggregate(single size): 40 mm nominal size, m.s. tube 40 mm dia, average rate of mild steel round barsfor reinforcements, quarry waste, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3m (2.02-3.75m), wall form panel 1250x450 mm, corner angle 45x45x5 mm 2.50 m long, column clamp 450x1070 mm, prop 2m(2-3.5m), structural steel such as tees,angles,channels and r.s joists

State Government

CTN :40691595

24 Jun, 2025 17.31 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure threshing floor including pucca storage at thiruvettakudy vp in kottucherry commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheets for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charges of diesel road roller 8 to 10 tonne including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :40685001

03 Jul, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of pipe fittings (elbow, tees, reducer, flanges, blind flanges and nut-bolt) as per the annexure

Pipe Union Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government