Web Analytics Made Easy - StatCounter

Pipe Union Tenders

Get complete information related to latest Pipe Union Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pipe Union Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pipe Union Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45484801 Due date: 07 Jul, 202607 Jul, 2026 NA
Tender For corrigendum : supply of union (pipe union) to drg no. 412-53(as per drawings and specifications)

CTN :45716962 Due date: 18 Jul, 202618 Jul, 2026 NA
Tender For supply of plywood , mcb , mild steel loop holes size 900x450mm with all fitiing , ms door , ms loop hole with shutter , ms prefabricated steel door , ms single bunk bed with ply cushion , ms steel ladder , nut and bolt for srt , office table big , oil bound distemper , paint brush , pc cable 6 sqm 2 core copper , pbs roll , peg stay 6 hooks , pendent holder , pipe 40 mm 20 ft long , pillar cock , pit cover for lc , plywood 9mm 6ftx3ft , pp gi 10ft long green colour , pp gi sheet 12ft , punch tape , pvc bd 8 x 10 inch , pvc bd 6 x 4 inch , pvc cable 2 core copper , pvc cable 10 sqmm 2 core aluminum , pvc chair with arm , pvc pipe 3inch , pvc door , rectangle pipe 2inch x 1inch , pvc reducer socket 1inch x 3inch , round up , sand , scatling , septic tank cover , shover , sleeping double bunk bed cushion , sliding bolt 10inch , soakage pit cover , soap disc , socket 4inch for pvc pipe , solution for pvc , srt 10ft , stainless steel hand wash basin with frain pipe and waste coupling , stainless steel dispenser , steel but hinges 3inch door hinges , starter 3 phase , steel door size 900 x 1800mm with all fittings , steel ladder , steel locker size 770x600x950mm , steel window , steel sink , stop cock , switch 5 amp , switch 5 amp comb , switch socket 15 amp , syntex stand , tab , tarpin oil , tefflon tape , table rod complete set , thinner , toilet seat cover , towel rod , tower bolt , u clip 25 mm , urinal port with waste pipe , union 1 inch , ventilator size 450x300 , non skid vetrified tiles 2ft x 2ft , wall mounting fan , wash bain piller cock , waste pipe , water camper stand , water proof plastic , water storage tank , welding rod , wc seat , white cement , wire mesh 4x20ft , wire 3 core 10sqmm , window rain protector , wire t c 16 sqmm , wooden board 8x8x2 , wk station table , wooden primer , wooden cabinet , cement opc 43 grade , hdpe film 500 micron , ceramic wash hand basin with all fittings , bib tap , pvc low level cistern 10 ltr capicity , cgi sheet 8ft , srt 8ft , 4mm clear acrylic sheet in lieu of glass for window , glass putty , pvc copper wire , ppgi sheet 6ft , plywood 8ft x4ft 12mm thick , 100 mm thick machine pressed interlocking paver block , pcc bricks , false ceiling tullu pump, 16 amp switch , 4 inch dia pvc plastic pipe, 5 amp s socket , aggregate , air filter , aluminium door , aluminum door closure, angle holder, bib cock brass, binding wire, black fill compound , paint, bow handle, brass rod, camper stand , celling fan , celling light , ceramic non skid tile 1ft x 1ft, cgi sheet 10ft, chair plastic , chair revolving, change over switch 32 amp, cloth hook, cob garden light, colour coated sheet 1ft long , concertina coil, concrete block , coolent , cp hose pipe , cpvc elbow 1inch, cpvc nipple 1inch, cpvc pipe 1inch, cpvc socket 1inch, cpvc tee 1inch, cpvc union 1inch, cutting disc 4inch, door rain protector , door stopper , double bunk bed , earthing set , elbow 4inch for pvc pipe , entrance canopy with cgi sheet fitted , exhaust fan, false ceiling 2ft x 2ft, fan belt, fan capacitor , fasterner , fire extinguisher 2 kg, flexible pipe 2 inch, flexible pipe 20mm, floor tiles of size 11inch x 11inch, flush tank pvc with complete, fly proofing door aluminium, fuel filter element, fuel pipe , gang box, gate valve, geyser 3 ltr, gi elbo , gi elbo , gi pipe 20 ft long, gi union, gi pipe socket, gi pipe union, gi pipe 20 mm socket, gi pipe socket, gi pipe union, gi pipe socket, gi socket, glass pane , hdpe can 35 ltr, hand jet spray, hdpe sand bag, hot and cold pipe 450mm, hexa blade, indian toilet seat, insulation tape, ismb, inverter led bulb, karandi, j hook angle small, ismb , ldpe film 130ft x 18ft, led bulb 15 w, led bulb 9 w, led security light 33 w, led tube light //bid details 2 / 141

State Government

CTN :45722969 Due date: 13 Jul, 202613 Jul, 2026 28.99 Lacs
Tender For construction of a new checkdam near special repair no.181 of vi.amli on local kotar between vi. amli & dhulmahudi faliya vi.nadhelav, ta.garbada, di.dahod.

State Government

CTN :45705811 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

State Government

CTN :45704840 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

Central Government/Public Sector

CTN :45492036 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For corrigendum : special repair for replacement of ci/ gi water pipe line into di (ductile iron) pipe line in gtc area at mil stn kota

Central Government/Public Sector

CTN :45542259 Due date: 06 Jul, 202606 Jul, 2026 43.00 Lacs
Tender For corrigendum : special repairs to building no iv at mh wellington and special repair replacement of gi pipes into di pipes of ava hill and lake view area and certain minor work under ge wellington

CTN :45526950 Due date: 30 Jun, 202630 Jun, 2026 17.58 Lacs
Tender For bid to ras supply of point 5 core , lt straight through joint 50 sqmm x 3 point 5 core , lt straight through joint 35 sqmm x 3 point 5 core , lt straight through joint 95 sqmm x 3 point 5 core , lt straight through joint 25 sqmm x 4 core , lt straight through joint 16 sqmm x 4 core , lt straight through joint 300 sqmm x 3 point 5 core , lt straight through joint 240 sqmm x 3 point 5 core , lt straight through joint 150 sqmm x 3 point 5 core , lugs 150 to 240 sqmm , lugs 50 to 120 sqmm , lugs 16 to 50 sqmm , mcb spn 12 way db , mcb spn 8 way db , mcb tpn 4 way db , mj coller 250 mm dia , mj coller 200 mm dia , mj coller 150 mm dia , mj coller 100 mm dia , rigid non metallic pvc conduit pipe 40mm , single core pvc insulated copper conductor 1 point 5 sqmm , single core pvc insulated copper conductor 2 point 5 sqmm , socket modular type 15 or 16 amps , socket modular type 5 or 6 amps , switch modular type 15 or 16 amps , switch modular type 5 or 6 amps 1m 1 way , switch socket combination 6 and16 amp multi pin type , switch socket combination 5 or 6 amp multi pin type , thermostar , three core pvc insulated copper conductor 2 point 5 sqmm , two core pvc insulated copper conductor1 point 5 sqmm as per , two core pvc insulated copper conductor 2 point 5 sqmm , led bulb of capacity 7w , led light fitting 1x4 or 5 watt , led light fitting 1x8 or 9 or 10watt , plug top 3 pin 16 amp , plug top 3 pin 5 amp 240 v , socket 15 amps , switch piano type 5 or 6 amp one way , switch piano type 5 or 6 amp two way , switch 15 or 16 amps , bell push switch sp 240v , casing capping 32 mm 8 ft long , holder pendant bakelite , mcb10 way distribution box , modular socket 6 amps 3 pin , modular white cover plate with frame 3 module , modular white cover plate with frame 4 module , modular white cover plate with frame 6 module , socket out lets 3 pin socket size 2 m 6 amp, modular , socket out lets 6 pin socket size 2 m 6 and 16 amp , switches 2 way switch size 1 m 6 amp , led inverter tube light batten 20w , led bulb with battery 9w , capacitor for fan 400 v , holder angular backlite , holder batten bakelite , metal clad socket 15 amp , modular domestic p type switch 6 amps with indicator , modular domestic p type switch 16 amps with indicator , modular fan regulator , switch socket combination 6 and 16 amp with junction box led inverter tube light batten 20w, led bulb with battery 9w, aluminium water proof pvc cable twine core 10 sqm, aluminium water proof pvc cable twine core 6 sqm, bleaching powder, cable flexible copper 2 core 1.0 sqmm twisted, cable flexible copper cable 2 core 1.5 sqmm, casing capping 25 mm 3 mtr long, casing capping 32 mm, 8' long, change over switch 100 amps, capacitor for fan 400 v, condensor 2.5 mfd for ceiling fan, decorative wall mounting leaf design 5w led fixure, di pipe 200 mm dia socket and spigot end k9, di pipe 100 mm dia socket & spigot end k9, di pipe 150 mm dia socket & spigot end k9, di pipe adaptor 100 mm, di pipe adaptor 150 mm, di pipe adaptor 200 mm, di special socket end tee 150x150x150mm dia, di tee flanged end 250x250x100 mm dia, di tee flanged end 150x150x150 mm dia, di tee flanged end 100x100x100 mm dia, di tee flanged end 150x150x100 mm dia, di tee socket end tee 150x150x100mm dia, di elbow 90o 250 mm push on, di elbow 90o 200 mm push on, di elbow 90o 150 mm push on, di elbow 90o 100 mm push on, driver for led light fittings 18w/20 watt, driver for led street light fittings 45 watt, driver for led street light fittings 60 watt, end joint 70 sqmm x 3.5 core , end joint 50 sqmm x 3.5 core , end joint //bid details 2 / 87

CTN :45698022 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For supply of elbows reducing confirming to is 1239 (part 2) (q4) , elbows, tees and crosses, equal confirming to is 1239 (part 2) (q4) , pipe unions confirming to is 1239 (part 2) (q4) , elbow, equal, 135 degrees conforming to is 1239 (part 2) (q4) , nipples, hexagon, equal confirming to is 1239 (part 2) (q4) , plug confirming to is 1239 (part 2) (q4) , two way valve (q4) , door handles (v2) isi marked to is 208 (q4)
 Loading, Please wait...

Connect us via What's Up