Latest pipes fitting item Tenders | Government pipes fitting item Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government And Public Sector

CTN :45303173

13 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For providing of facility management services - lumpsum based - industrial; non radiation area-- shifting of piping material from welding shop --1 lumsum quantity is equal to 10000 having unit of measurement is inch meter--for complete details refer boq item no 1(a) ..,facility management services - lumpsum based - industrial; non radiation area-- fabrication and erection including welding of --1 lumsum quantity is equal to 35 having unit of measurement is metric ton--for complete details refer boq item no 1(b) me..,facility management services - lumpsum based - industrial; non radiation area-- dismantling of pipe and structural steel items --1 lumsum quantity is equal to 40 having unit of measurement is metric ton--for complete details refer boq item no 1(c) me..,facility management services - lumpsum based - industrial; fabrication of pipe clamp set for on-line leak rectification in system --1 lumsum quantity is equal to 800 having unit of measurement is inch dia--for complete details refer boq item no 1(d) ..,facility man

CTN :45303437

26 May, 2026 43.5 Thousand

Delhi - Delhi

Tender For provision of electrical item at the residence office of shri gaurav goyal, joint secretary, new delhi.subwork/packages:provision of electrical item at the residence office of shri gaurav goyal joint secretary, new delhi. - supplying , installation, testing and commissioning of air cooled hi wall split type air conditioners complete with indoor unit(idu), out door unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant, wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. the system shall be able to deliver 100% of the rated capacity upto 42 0c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply : electrical cable is 694 or is 9968 temperature sensing control is/international electrotechnical commission (iec) 60730, hermetic compressor is 10617, heat exchanger is 11329, capacitor is 2993 and motor is 12615. complete as per cpwd specification and is : 1391 part ii 2023. the system shall be able to operate up to 50 0c (out door ambient temperature). inverter type - cooling only

Central Government And Public Sector

CTN :44846089

25 May, 2026 94.44 Lacs

Chandigarh - Chandigarh

Tender For bid to ras corrigendum : supply of supplying of 1.5 tr nominal capacity invertor type metal body , installation, testing and commissioning of of 1.5 tr inverter type ductable air cooled split ac unit as per item no.1 above in equipment room , providing and fixing heavt duty powder coated m s stand of suitable size made out of suitable guage ms shee , supply and fixing of 3 core 2.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply and fixing of 4 core 1.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply installation testing and commissioning including vaccumiazation and nitrogen testing of , supply installation testing and commissioning including vaccumiazation and nitrogen , supplying and fixing of 25 mm sizes of rigid upvc piping from outlet socket of ac unit complete with elbow , supplying and fixing dp sheet steel enclosure on surface or recess along with 25 or 32 a 230 v c curve dp mcb , supplying and fixing 5 amps to 32 amps rating, 240 or 415 volts c curve miniature circuit breaker suitable for inductive load of single pole and neutral , providing and fixing supply air grills of powder coated aluminum construction having a free area of not less than 70 percent without volume control dampers , supplying and installing of 150 mm width 50 mm depth 1.6 mm thickness nominal size of perforated hot dipped galvanised iron cable tray

CTN :45283267

19 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of set of air piping for air motor (smgr) m/s. bombardier make comprising of 5 items in 27nos. as per elw/bsl's sk. no. - bsl/elw/sk.no.9070. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45210018

29 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of screw joint for brake piping. drawing no. : m/s. ermeto part no. g28lcf or equivalent.matl.& specn : as per drawing / part no. [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45283807

11 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of heavy duty pneumatic piping arrangement with fiba for rcf bogie fitted air spring in secondary suspension ss fittings as per drg. no.: lw36189. material supply as per drg./part no. material details are as follows: (1) street elbow, icf/std 3-5-032, item no.: 2, (qty.: 4 nos.) (2) female elbow connector, icf/std 3-5-021, item no.: 2, (qty.: 2 nos.) (3) hex nipple, icf/std 3-5-016, item no.: 4, (qty.: 5 nos.) (4) male connector, icf/std 3-5-016, item no.: 4, (qty.: 3 nos.) (5) stand pipe elbow, ermeto evw22lomdcf, (qty.: 1 nos.) (6) male stud connector, ge22lr3/4kegcf, (qty.: 1 nos.) (7) ss304 22 mm od, 2.5 mm thick, 2.5 mtr tube pipe. [ warranty period: 30 months after the date of delivery ] ]

CTN :45205592

25 May, 2026 75.00 Lacs

Barmer - Rajasthan

Tender For corrigendum : left out mechanical works of fabrication erection and weldingof all tanks item and laying of above ground mvws foam verious size piping works of tanks on labour contract basis

CTN :45282476

17 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of one set of ss tubes and double ferrule for brake piping arrangement of lhb bogies consisting of 1. bulk head elbow (with conical seating) 3/4"od x m26 x 1.5(m) to drg.no.icf/std-3-5-113,item-1,alt "c" qty-3 nos. 2. bulk head elbow 3/4" od to drg.no.icf/std-3-5-117-item-1,alt"b",qty-l no. 3. male elbow (with conical seating) 1/2" bspt(m) x m26 x 1.5(m) to drg.no. icf/std-3-5-115,item-1,alt "nil", qty-4 nos. 4. special adaptor 1/2" bsp(m) x 1/2" bsp(f) to drg. no. icf/std-3-5-116, item-1,alt"c",qty-4 nos. 5. male branch tee union" (with conical seating) 3/4"od x m26 x 1.5(m) to drg.no. icf/std-3-5-132,item-1, alt "nil" ,qty-l no.6. bulk head swivel union 3/4" od to drg. no. icf/std-3-5-133-item-1, alt "nil" qty-2 nos. 7. union tee 3/4" od to drg. no.icf/std-3-5-018-item-2,alt"b",qty-1 no. 8. bulk head male connector (with conical seating) 3/4"od x m26 x1.5(m) to drg. no.lwscwac-3-2-005,item-1, alt "nil" qty-2 nos. 9. ss seamless pipe 3/4" od x 6000 mm astm a269 gr.tp 304 to icf/md/spec- 166,issue status-01,rev-04, qty-l no. [ warranty period: 30 months after the date of delivery ] ]

CTN :45118080

29 May, 2026 NA

Patiala - Punjab

Tender For supply of set of steel pipe fittings for piping of wap7 & wag9-hc loco to set list no. el29230561 rev.-02, specn. no. clw/ms/3/068 alt.-15, and str no. clw/2015/eldo/m/str/64rev.-0. [ warranty period: 72 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Pipes Fitting Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector