Latest pipes Tenders | Government pipes Tenders

State Government

CTN :41862822

06 Oct, 2025 25.86 Lacs

Malappuram - Kerala

Tender For corrigendum : this work is for construction of parapet, platform around sources etc and ground water recharge pit, supply and fixing gutter pipe and 75mm upvc pipes for collecting water from the roof top, down pipe for flushing out first flow water, scour pipe etc

CTN :41904717

22 Oct, 2025 11.97 Lacs

Gwalior - Madhya Pradesh

Tender For survey, selection and installation of booster motor pumps of required discharge and head at different locations laying, jointing, testing, commissioning of gi pipes of different dia, supply and installation of sluice valves, non- return valves and ot

State Government

CTN :41925944

23 Oct, 2025 7.52 Lacs

Nangal - Punjab

Tender For maintenance of parapet wall with m.s steel pipes in gallery at first floor in bbmb dav public school at nangal township

Central Government/Public Sector

CTN :41992959

06 Oct, 2025 NA

Kochi - Kerala

Tender For procurement, fabrication and fitment of bwts system for the vessel rm0819 and rm0821 - procurement, fabrication and fitment of bwts system for the vessel rm.0819 - service cost, procurement, fabrication & fitment of bwts system pipes engine room-163 spools, procurement, fabrication & fitment of bwts system pipes upper deck-259 spools, procurement, fabrication and fitment of bwts system for the vessel rm.0821 - service cost, procurement, fabrication & fitment of bwts system pipes engine room-163 spools, procurement, fabrication & fitment of bwts system pipes upper deck-259 spools

Central Government/Public Sector

CTN :42116384

21 Oct, 2025 31.43 Lacs

Kochi - Kerala

Tender For this work consists of reconstruction of damaged drains within csl of approx. length 140m rcc drain with ms covers and approx. 40m with np pipes. the scope of work will be dismantling, excavation, disposal of the damaged portion and reconstruction.

State Government

CTN :42038165

10 Oct, 2025 6.80 Lacs

Baramulla - Jammu And Kashmir

Tender For corrigendum : providing and laying of flanged iron pipes from house of ab rahim sheikh onwards phase 2nd buglinder

CTN :42026393

27 Oct, 2025 5.13 Crore

Ujjain - Madhya Pradesh

Tender For design and construction of rcc pier for pipe support and providing, laying, jointing and testing shifting of ductile iron clear water rising main and sewer rising main pipeline of different dia as per alignment of proposed submersible bridge across

CTN :42074789

27 Oct, 2025 10.00 Lacs

Burhanpur - Madhya Pradesh

Tender For supply of c.i. material - sypply of following material, sluice valve ,standard is 14846, body material gray cast iron, stem material - stainless steel, pressure rating body pn 2.4 and seat 1.6, size of valve 2", sluice valve ,standard is 14846, body material gray cast iron, stem material - stainless steel, pressure rating body pn 2.4 and seat 1.6, size of valve 3", sluice valve ,standard is 14846, body material gray cast iron, stem material - stainless steel, pressure rating body pn 2.4 and seat 1.6, size of valve 4", d joint, material c.i. suitable for 6kg pvc pipes, size 2", d joint, material c.i. suitable for 6kg pvc pipes, size 3", d joint, material c.i. suitable for 6kg pvc pipes, size 4", d joint, material c.i. suitable for 6kg pvc pipes, size 6", d joint, material c.i. suitable for 6kg pvc pipes, size 8", d joint, material c.i. suitable for 10kg pvc pipes, size 10", d joint, material c.i. suitable for 10kg pvc pipes, size 12", threaded flange, material c.i. size 2", threaded flange, material c.i. size 2 1/2", threaded flange, material c.i. size 3", threaded flange, material c.i. size 4", reducer threaded flange, material c.i. size 2"x2 1/2", reducer threaded flange, material c.i. size 2"x3", non return valve, swing type, body material cast iron epoxy coated, flanged pn 16, swing seat epdm rubber, size 2", non return valve, swing type, body material cast iron epoxy coated, flanged pn 16, swing seat epdm rubber, size 2 1/2", non return valve, swing type, body material cast iron epoxy coated, flanged pn 16, swing seat epdm rubber, size 3", non return valve, swing type, body material cast iron epoxy coated, flanged pn 16, swing seat epdm rubber, size 4", bolt with nut, standard astm a194, material ci, size m12 x 50mm long, bolt with nut, standard astm a194, material ci, size m12 x 60mm long, bolt with nut, standard astm a194, material ci, size m12 x 75mm long, bolt with nut, standard astm a194, material ci, size m12 x 100mm long, bolt with nut, standard astm a194, material ci, size m12 x 125mm long, bolt with nut, standard astm a194, material ci, size m12 x 150mm long, flat washer, material ci, size 1/2", flat washer, material ci, size 5/8", asbestos / graphite gland rope, size 10 mm dia,, asbestos / graphite gland rope, size 12 mm dia,, asbestos / graphite gland rope, size 16 mm dia,, rubber sheet, rubber gasket, size 2", rubber gasket, size 2 1/2", rubber gasket, size 3", rubber gasket, size 4", rubber gasket, size 6", rubber gasket, size 8", nitrile rubber o ring, size 3", nitrile rubber o ring, size 4", nitrile rubber o ring, size 6", nitrile rubber o ring, size 8", nitrile rubber o ring, size 10", nitrile rubber o ring, size 12", plastic / nylon rope 14mm, plastic / nylon rope 16mm, 3 piece ball valve, material body ci, ball stainles steel, threaded end, size 2", 3 piece ball valve, material body ci, ball stainles steel, threaded end, size 2 1/2", 3 piece ball valve, material body ci, ball stainles steel, flanged end, size 3", 3 piece ball valve, material body ci, ball stainles steel, flanged end, size 4", water tap, material c.i, size 1/2", hexa blade, both side thread, hexa blade for metal cutting, both side threade

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p