Latest plaster of paris powder Tenders | Government plaster of paris powder Tenders

Central Government/Public Sector

CTN :45026965

03 Aug, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of enamel synthetic, exterior, finishing, black. specification:- is 8662:2024 (third revision) along with rdso amendment no.1a (rev.1.0) as an additional requirement. special terms & conditions:- (i) material shall be packed in 20 ltrs. metal containers conforming to is:2552/1989_amend.1 (third revision) (reaffirmed 2018) grade b-1. (ii)the goods should be dispatched within 02 months from the date of manufacturing and firm will give an undertaking that the material supplied is not more than60 days old. (iii) suppliers have to write on the container batch no., date, month, year of manufacturing and also write the paint can be used before 12 months from the date of manufacturing. (iv) keeping properties- not less than one year. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45486731

18 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of finishing varnish (wsy-101)/ finishing varnish fine coat-101 (shelf life 10 months) hitachi-a0-201,alt.1/rdso spec.no. rdso/2008/el/spec/0087 [rev-0] specn: spec.no. rdso/2008/el/spec/0087 [rev-0] [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

Central Government/Public Sector

CTN :45494549

20 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of paint synthetic enamel interior finishing smoke grey. as per rdso specn no. m&c/pcn/100/2013. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45486683

08 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of paint enamel synthetic exterior white finishing to is: 8662/2004 [second revision] with additional requirements of icf specification no.icf/md/ spec -045, issue status: 02, revision: 03.dt.14.06.2007. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45486944

30 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of form no.op/t-122b(set),combined train report. book of 25 sets of 4 foils (25x4foils),1) unit - number of books, 2)size-305x430mm, plus/minus 5mm, 3) printing paper-white map litho 60gsm, i.s no.1848/part(1)2018 . 4)printing-both side in black ink & numbering in red ink, printing matter to be collected from consignee, 5)binding-25 sets(25x4foils) in a book and left side three stitching by20 gauge wire with brown kraft paper cover of 110 gsm of i.s no1397/90 grade-ii (mg), 6) sample:-one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7)packing: each pack will contain four books and must be wrapped in more than 50 micron transparent poly propylene foil or bag as suitable as approved by govt and five packets to be packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no.,form no. & serialno. and cartoon serial. special condition:-quantity is in number of books and material to be supplied ina book of 25 sets. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45471372

23 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of paint, post office red (isc no. 538), enamel, synthetic exterior, finishing. matl.& specn :-- is: 8662 / 2024 or latest with additional requirements of (1) rdso amend. no. 1 (rev. 0) for pigment content, (2) icf/md/spec-045 (issue status 02, rev. 03, dated 14.06.2007) & (3) rdso amend. no. 1a (rev. 1.0). [ warranty period: 10 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45457878

17 Jun, 2026 3.36 Lacs

Subarnapur - Odisha

Tender For new ib building at sonepur_building - finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with t&p required for the work etc. complete in all floors., providing and fixing chequred tiles in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, t&p and cess etc. complete in all respect as per specification and direction of the engineer-in-charge., 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. but excluding the cost of iron fittings., providing, fitting & fixing up partition walling oel aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and oel section 4660 as tapered clip for fixing up 12mm thick prelaminated board (nova pan make) and jointing angle no.1855 etc.(12mm thick novapan prelaminated bead), fly ash brick masonry in c.m (1:6) including cost conveyance royalty of all materials., providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of engineer-in-charge., providing c.c. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of engineer- in - charge., dismantling and removing doors, windows and ventilatoras including removal of frame,hinges and stacking the same for re-use and removing the debris within 50mtr lead etc complete., supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section no.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour t & p etc complete as per direction of enginner -in charge., providing , fitting & fixing of al. door with oel anodized al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip no.4660 and frame to be completed bt means of jointing angle no.1855 including all cost of labour t & p hire charges of drilling machine labour charges etc complete.

Central Government/Public Sector

CTN :44550898

19 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For paint enamel synthetic light grey exterior finishing to isc 631 to is 2932/93. packing in 20 ltrs.new non returnable 20 ltrs m.s. drums to is 2552/89 grade b-ii. the date of supply of the material should be within 60 days from the date of manufacture. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45265520

19 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of enamel synthetic exterior brushing/ finishing gulf-red to icf specification icf/md/spec.-045 issue states 02 revision - 03 except clause c3 of is:8662/2004. packing in 20 ltrs. new non-returnable m.s. drums to is:2552/89 gr. b-ii. "this is shelf life items and should be procured with staggered delivery period . supplier to mention/print date of manufacturing on the item & item to be supplied within 60 days of manufacture date." [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Plaster Of Paris Powder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector