Latest plaster of paris powder Tenders | Government plaster of paris powder Tenders

Central Government/Public Sector

CTN :45713868

11 Jul, 2026 30.00 Lacs

Delhi - Delhi

Tender For periodical services and other connected items at af stn 3 wing under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed ., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed ., all as per item no 02 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed ., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. ., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed ., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed ., m&l for rough cast (grit) finish plaster with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed ., m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed ., m&l preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 2 mm acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed ., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed ., m&l for preparation of newly plastered surface of walls & material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed ., m&l for complete removal of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying two coat of white wash complete all as specified and directed ., m&l for complete removal of old decorated, plast

Central Government/Public Sector

CTN :45713884

11 Jul, 2026 40.00 Lacs

Delhi - Delhi

Tender For periodical services and other connected items at af stn basant nagar under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no. 02 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. ., m&l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for rough cast finish plaster(grit wash) with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed., m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed., m&l preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 2 mm acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed., m&l for preparation of newly plastered surface of walls & material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed., m&l for complete removal of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying two coat of white wash complete all as specified and directed., m&l for complete removal of old decorated, pl

CTN :45684235

14 Jul, 2026 NA

Garhwal - Uttarakhand

Tender For purchase of surgical disposable item lenin item xray film - abdomen drain size - 28,30,32, absorbable gelatin sponge ( 1x2pack), absorbant cotton - 300gm, absorbant cotton 400gm, adhesive tape- 2 x5mtr, adhesive tape - 4 x5mtr, antibiotic tulle dressing compostion :- evently impregnated with ointment. each gram containing (polymyxin b sulphate usp 5000units, bacitracin zinc usp 400 units neomycin sulphate usp 3400 units) size- 10 cm x10cm, b.p blade all size -11,15,23, bandage rollded size - 5cmx5.0mtr, bandage rolled size - 10cmx5.0mtr, bandage rolled size- 15cmx5.0mtr, bandage than size - 100cmx20mtr, blood transfusion set, bone wax, carbolic acid 500gm., chest tube bag, chest tube drain size - 28,30,32, chlorhexidine gauze dressing (antiseptic tulle gras dressing), chlorhexidine gluconate & cetrimide solution 1000ml, cord clamp, cotton crep bandage size- 10cmx4mtr multi pack, cotton crep bandage size- 10cmx4mtr single pack, cotton crep bandage size - 15cmx4mtr multi pack, cotton crep bandage size - 15cmx4mtr single pack, disposable gloves strilize all size -, examnation gloves unstrilize all size, disposable insulin syringe, disposable spinal (l.p) needle all size, disposable syringe - 01 ml, disposable syringe - 02ml, disposable syringe - 03ml, disposable syringe - 05ml, disposable syringe - 10ml, disposable syringe - 20ml, disposable syringe - 50ml, disposbale needle size -16,18,20 needle size 1 ", disposbale needle size -23,24 no, disposbale needle size 26x1/2 , elastic adhesive bandage 3 x4.6mtr, elastic adhesive bandage - 4 x4.6mtr, e.c.g. electrod, e.c.g. jelly 250ml, endo trachyl tube cuffed size- 05 to 09, endo trachyl tube plain size- 01to 05, foleys catheter size 12, 14,16,18,20,22 no, foleys catheter size 8,10 no, foleys catheter tri way all size, gauze than size - 60cmx 20mtr, insulin syringe 1ml (40 units) with (fixed) 30g needle, i.v. canula size - 18, 20,22 no, i.v. canula size -16 no, i.v. canula size -24 no, i.v. canula size -26 no, i.v. infusion set, infent feeding tube all size, ligaclip 300, ligaclip 400, micro blade with handle disposable (karetone,crescent, ,enlarger, side port), micro drip set, mucus extractor, paedia drip set (100 ml chamber), paper tape - 2 x05mtr, paper tape - 3 x5mtr, paraffin gauze dressing size- 10cmx10cmx20 pcs pack, plaster of paris bandage size- 10cmx2.7mtr, plaster of paris bandage size - 15cmx 2.7 mtr, plaster of paris powder - 25kg bag, poly propylene mesh size- 15x15cm, poly propylene mesh size -6x6 cm., poly propylene mesh size- 8x15cm, paraffin gauze dressing size -10cmx10cm x20dressing, ryles tube all size, spacer with mask, spacer with out mask, absorbable hemostate (orc) size- 2x14" inch, absorbable hemostate (orc) size- 4x8" inch, absorbable hemostate (orc) size- 2x3" inch, surgical sprit 400ml, surgical sprit 500ml, transpore adhesive tape-size 2 x5mtr, transpore adhesive tape-size 3 x5mtr, tripan blue, thermometer digital, ultrasound jelly 250ml, umbilical catheter 3.5f, umbilical catheter 5f, urine collection bag 2000ml, yellow goggle, wound clot surgical 2 x3 (5cmx7.5cm) ce, wound clot surgical and trauma 4 x4 (10cmx10cm) ce, wound clot trauma 3 x8 (8cmx20cm)ce, wound clot trauma 3 x39 (8cmx100cm)ce, (stoma bag ) 40mm transparent urostomy bag with lock and roll system made from soft non woven matrial with velcroopening b) urostomy bag with non return valve, chromic catgut no1 (4259) 76cm 1/2circle round body heavy, chromic catgut 20 (4241) 76cm 1/2circle round body, polyglactin/polyglycolic acid (2347) no1 96cm 1/2circle round body heavy, polyglactin/polyglycolic acid no 2.0 (2317) 96cm 1/2circle round body, polyglactin/polyglycolic acid no 2.0 (2762) 90cm 1/2circle tapper cutting, black braided silk (5036) 2.0 76cm 3/8circle reverse cutting, black braided silk (5062) no-1 76cm 3/8circle cutting, monofilament polyamide (3336) 2.0 70cm 3/8 circle reverse cutting, iol non foldable all size, iol foldable all size, ambu bag child / adult (silicon), auto clave in

State Government

CTN :45354368

22 Jun, 2026 NA

Anantnag - Jammu And Kashmir

Tender For corrigendum : supply of gravel bajri , sand , boulder , cement 50 kg bag , iron tmt 10 by 12mm , plywood 12 mm , wooden door complete 4feet x7feet , wooden windoe complete 6feet x 5feet , hollow iron pipes d by s , cgi sheet 10feet x2.5feet , self screw , wire 1 mm 90 mtrs coil , wire 1.5 mm 90 mtrs coil , wire 2.5mm 90 mtrs coil , wire 4 mm 90 mtrs coil , wire 10mm 90 mtrs coil , switch 6 amp , 5 pin socket , indicator , guange box 4 way , guange box 3way , guange box 2 way , tape roll , chines screw 1 1by 2 inch , pvc gatte rawal plug , ss combine box type , channel 1inch , ceiling fan , fan dimmmer , exhaust fan , ceiling rose , square block , batten holder , angle holder , flexible pipe , automatic changeover 63 amp , mcb box 10 way , mcb dp 63 amp , mcb dp 40 amp , mcb dp 16 amp , mcb dp 10 amp , led bulb 40 w , led bulb 9 w , emulsion , wood primer , paint , tt oil , roller , brush 4inch , wallputty 20kg bag

CTN :45563479

30 Jun, 2026 NA

Ganjam - Odisha

Tender For supply of consumable & disposable items ab. cotton , abdominal drain kit(a.b. drain kit) , absorable geletaine sponge , adhesive elastic bandage (dynaplast) , adhesive elastic bandage (dynaplast) , air way , ambu bag/ resuscitat , silicon ambu mask , amplatz sheath , arterial cannula , b.p blade , b.t. set/blood administration set (with filter) , baby diaper , baby diaper , baby diaper , baby diaper , baby diaper , baby diaper , bacteria filter , bain circuit , bain circuit , bandi kidney biopsy gun , bannet (large) (covidien e 360 for c-pap use) , bannet (medium) (covidien e 360 for c-pap , bannet (small) (covidien e 360 for c-pap use) , bannet (xl) (covidien e 360 for c-pap use) , biopsy gum , bipolar hand probe with cable (length 11") , black disinfectant fluid (phenyl) isi , blood collection bag , blood collection bag cpd-a1 , bobble cpap circuit , b.p instrument digital , burn mesh (l) , c.v.p manometer , cartridge , cartridge , catheter mount , ccnpwt canister with aqua gel , central line fixation , central line/ central venous catheter , chest drainage bag , chest drainage tube , chhabra mpvp shunt , diaper (adult) , diaper (adult) , diapper (audit) , disinfectant for surface and enviroment , dispo skin stapler , dispo. cauttery cord , dispo. cauttery pencil , dispo. electro surgical pencil , dispo. head cap , dispo. insulin syringe with needle , dispo. insulin syringes with needle , dispo. kelly's pad , dispo. needle , dispo. oxygen mask with tube , dispo. oxygen mask with tube , dispo. pressure monitor , dispo. spinal needle/ lp needle , dispo. sterile appron (each piece) , dispo. syringe , dispo. syringe , dispo. syringe , dispo. syringe , dispo. syringe , dispo. syringe , dispo. syringe , dispo. ventilator circuit (flexicare or other) , dispo. ventilator circuit (flexicare or other) , dispo.tetra (each piece) , disposable wedden spatula , double luman tracheostomy tube cuffed , e. t. tube without cuff , e.t. tube with cuff , e.c.g. paper (12 channel) , e.c.g. paper (6 channel) , e.t. tube fixer , ecg cable , ecg chest electrode (bulb) , nasal prong (small) (covidien e 360 for c-pap , nasal prong (small) (schiller ventilator for c- , nasal prong (xl) (covidien e 360 for c-pap use) , nasal prong (xl) (schiller ventilator for c-pap) , nasal prong (xxl) (covidien e 360 for c-pap , nebuliser cord with mask , nebulizer curd with mask , nel cath , niv face mask , , oropharyngeal airway , , ortho gloves sterile (6 , 7, 7%,8) , oxygen connecting tube , p.v.c drain , paraffin gauze , patient plate cable (monopalar) , peritoneal dialysis child catheter , peritoneal dialysis fluid (1000ml) , peritoneal dialysis transfusion set child , piic line 22g-2fr , piic line 22g-2fr , plain suction cathetor , plaster of paris bandage roll , plaster of paris bandage roll , plaster of paris bandage roll , plaster of paris bandage slab , plaster of paris bandage slab , plaster of paris powder , pmo line , pmo line , polyurethane foam dressing wound drainage kit with silver coated (large) , polyurethane foam dressing wound drainage kit with silver coated (medium) , povidine lodine scrub , povidone lodine lotion , povidone lodine lotion , power droll , premicath with stylet , premicath with stylet , pressure bag , punch biopsy , composite circular mesh , composite mesh 10*15 , composite mesh 15*15 , composite mesh 15*20 , optical trocar 12mm , optical trocar 10mm , optical trocar 5mm , endo linear cutter stapler 60mm , endo linear cutter stapler 160mm , endo linear cutter cartridge 45 purple , endo linear cutter cartridge 60 purple ,

State Government

CTN :45558196

22 Jun, 2026 NA

Medininagar - Jharkhand

Tender For supply of list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractor's profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source , fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. , close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel , aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 to

State Government

CTN :45562938

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For stone boulder of size 150 mm and below at source quarry supply of quarried stone 150-200 mm size for hand broken at source quarry boulder with minimum size of 300 mm for pitching at source quarry coarse sand i) at source coarse sand ii) at source fine sand at source quarry moorum at source quarry gravel/quarry spall at source quarry granular material or hard murum for gsb works at source quarry fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant filter media/filter material as per table 300-3 (mort&h specification) at crusher. close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher. close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. close graded granular sub-base material 26.5 mm to 9.5 mm at crusher. close graded granular sub-base material 9.5 mm to 4.75 mm at crusher. close graded granular sub-base material 9.5 mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 75 micron at crusher. close graded granular sub-base material 2.36 mm & below at crusher. stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher. coarse graded granular sub-base material 2.36 mm & below at crusher. coarse graded granular sub-base material 4.75 mm to 75 micron at crusher. coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher. coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 53 mm to 26.5 mm at crusher. aggregates below 5.6 mm at crusher. aggregates 22.4 mm to 2.36 mm at crusher. aggregates 22.4 mm to 5.6 mm at crusher. aggregates 45 mm to 2.8 mm at crusher. aggregates 45 mm to 22.4 mm at crusher. aggregates 53 mm to 2.8 mm at crusher. aggregates 53 mm to 22.4 mm(grade iii) at crusher. aggregates 63 mm to 2.8 mm at crusher. aggregates 63 mm to 45 mm (grade ii)at crusher. aggregates 90 mm to 45mm(grade i) at crusher. aggregates 10 mm to 5 mm at crusher. aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher. aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher. aggregates 13.2 mm to 5.6 mm at crusher. aggregates 13.2 mm to 10 mm at crusher. aggregates 20 mm to 10 mm at crusher. aggregates 25 mm to10 mm at crusher. aggregates 19 mm to 6 mm at crusher. aggregates 37.5 mm to 19 mm at crusher. aggregates 37.5 mm to 25 mm at crusher. aggregates 6 mm nominal size at crusher. aggregates 10 mm nominal size at crusher plant. aggregates 13.2/12.5 mm nominal size at crusher plant. aggregates 20 mm nominal size at crusher plant. aggregates 25 mm nominal size at crusher. aggregates 40 mm nominal size at crusher. crushing of stone aggregates (gsb crusher run) ac pipe 100 mm dia acrylic polymer bonding coat alluminium paint aluminium alloy plate 2mm thick aluminium alloy/galvanised steel aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm barbed wire bearing (cost of parts) bearing (cast steel rocker bearing assembly of 250 tonne ) road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision) bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation) taking elastomeric bearing of size 500 x 400 x 96mm, overall volume=19200 cubic cm bearing (forged steel roller bearing of 250 tonne) bearing (pot type bearing assembly consisting of a metal piston supported by a disc, pt

State Government

CTN :45558189

22 Jun, 2026 NA

Chaibasa - Jharkhand

Tender For the quotation is invited to ascertain and assess the rate of materials as per with lowest market rate for framing of schedule of rate. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision), bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation), taking elastomeri

State Government

CTN :45562939

22 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractors profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road st

State Government

CTN :45460815

12 Jun, 2026 NA

Dumka - Jharkhand

Tender For quotation for rate of materials - stone boulder of size 150 mm and below at quarry supply of quarried stone 150-200 mm size for hand broken at quarry boulder with minimum size of 300 mm for pitching at quarry gravel/quarry spall at quarry gelatin 80% jute netting, open weave, 2.5 cm square opening for seeding and mulching random rubble stone sand bags (cost of sand and empty cement bag) square rubble coursed stone stone bricks of size (i) 250 mm x 125 rım x 100 mm (ii) 250 mm x 125 mm x 125 mm (i) g.i. wire (8 to 10 swg) (ii) black annealed (8 to 10 swg) binding wire (i) annealled wire (20 to 25 gauge) (ii) black annealed (20 to 25 gauge) expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide bituminastic board (for use as per expansion joint 1.5.1838 1938 filter) (i) 25 mm thick 150mm dia r.c.c.np2 perforated pipe pressure release valve (1) safety valve (ii) pocket valve cost of burnt clay pipe of internal dia 31.70 mm (11/4") external dia 38 mm (11/2") (1)100 mm long (ii)225 mm long fuse coil bolts 20 mm dia 25 cm long nuts and bolts 16 mm dia375 mm long with washer etc palm leaves check valve 38 mm dia. 38 mm dia. water hose 30m long nx core bit 48 cts(imp) nx core bit 38 cts(imp) nx tc bit bx tc bit nx st reamer cell 6.5 cts(imp) bx st reamer cell 6.5 cts(imp) good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores ie. total 15 metre

Plaster Of Paris Powder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors