Latest platform balance Tenders | Government platform balance Tenders

State Government

CTN :45613922

03 Jul, 2026 3.58 Lacs

Surat - Gujarat

Tender For providing, supplying and installation with testing demo of additional laboratory equipment for aggregate, cement and mix-design at quality control sub division, rander, dist. surat.- providing and supplying & installation with testing demo of vicat needle apparatus for testing of initial, final seeting time & consistency of cement test. one complete set. confirm to 18:5513 , providing and supplying & installation with testing demo off vicat mould, , providing and supplying & installation with testing demo of vicat glass plate, , providing and supplying & installation with testing demo of le-chatler mould including two glass plates and lead weight as per is set of six., , providing and supplying & installation with testing demo of le-chater flack, , installation with testing demo of slump test apparatus with tamping rod 16 mm dia x 600 mm long graduated., , providing and supplying & installation with testing demo of humidity chamber refrigerated-inner 8.8-45x45x45 cm-92 liter for temperature and humidity control with over temperature protection audio alarm system, , providing and supplying & installation with testing demo of servo voltage stabilizer -3kva-single phase for humidity chamber., , providing and supplying & installation with testing demo of humidifire with controler digital-confirming ito indian standard codes, , providing and supplying & installation with testing demo of whatman fliter paper-40 for blain air permeability test apparatus for fineness of cement, confirming to indian standard codes., , providing and supplying & installation with testing demo of precision electronic balance-600 gmm 01 gm (10mg)-confimming to indian standard codes., , providing and supplying & installation with testing demo of cement morter cube mould-7.06 cm-for cement confirming to indian standard codes (18 10080, 84031), , providing and supplying & installation with testing demo of 90 micron is sleve, , providing and supplying & installation with testing demo of gauging travel 8 anch. (200 mm)-confirming indian standard codes., , providing and supplying & installation with testing demo of temperature meter concrete, , providing and supplying & installation with testing demo of room temperature meter or thermo hygrometer, , providing and supplying & installation with testing demo of tds meter pen type, , providing and supplying & installation with testing demo of ph meter - pen type, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-100ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-250ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-500ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-1000ml, , providing and supplying & installation with testing demo of standard weight box-8.8.-1 mg-200 gm-class f1 (with nabl calibration), , providing and supplying & installation with testing demo of buoyancy balance with electronic balance 10 kg x 0.1 gm, , providing and supplying & installation with testing demo of 1.) distance piece-50mm height-nos 2.) distance piece-30mm, , height-inos, , machine, , providing and supplying & installation with testing, , demo of electronic platform, , balance-100 kg-, , 10 gm platform size 600 x, , , , providing and supplying & installation with testing demo of g.j. tray 1000x 1000 x 50 mm confirming to indian standard codes., , providing and supplying & installation with testing demo of bnd- ordinary portland cement standard specific area (blaine) one set surface, , providing and supplying & installation with testing demo of wash bottle 1000ml, , providing and supplying & installation with demo of spatula testing, , providing and supplying & installation with testing demo of fil

CTN :45570395

08 Jul, 2026 NA

Betul - Madhya Pradesh

Tender For supply, installation and commissioning of lab equipments and smart class items etc - p, soxhlet extraction unit, tissue culture rack (caster racks), hot air oven stainless steel, flame photometer, heating mental with regulator cap 500 ml, digital colony counter, thin layer chromatography apparatus, micro pipette (fixed) 1- 5 ml, dissecting microscope, colorimeter, distillation apparatus double distillation capacity 5lt, laminar air flow horizontal, water and soil testing analysis kit, magnetic strirrer with hot plate, bionocularmicroscope, refrigeratorr, electronic balance (0.1 grm to 600 grm), desktop computer, lab table, f.e.t. characteristic apparatus, m.o.s.f.e.t characteristic apparatus, solar cell characteristic apparatus, single stage and double stage r.c. coupled amplifier/ feed back amplifier, transistorized push- pull amplifier, f.e.t. amplifier, hartley and colpitt s oscillator, zener regulated power supply, study of various a.c. bridges e.g., c.r.o. single trace 10 mhz, function generator (b)1hz to 10 mhz, series and parallel resonance circuit, spectrometer 6 / 7 , weight box, vernier callipers, digital multimeter, ldr characteristics apparatus., study of hall effect complete setup., function generator, impedance and power factor of lcr circuit, e/m by milikan s oil drop method, measurement of wave length of he-ne laser using ruler with laser complete setup, meter bridge (carey fostor bridge), desktop computer, lab table, lees apparatus, compound pendulum apparatus, bar pendulum apparatus, moment of inertia meter tot apparatus, maxwell needle apparatus, torsion pendulum apparatus, audio frequency oscillator, cathode ray tube (thompson method), jfet apparatus, photo diode apparatus, zener diode, transistor pnp and npn kit, compound microscope, dissecting microscope, binocular microscope, desktop computer, refrigeratorr, binocular

State Government

CTN :45291988

18 Jun, 2026 NA

Bhabhua - Bihar

Tender For bid to ras supply of machine wrist action , vdrl shaker experiments , flask shak useful for uniform , automatic pippeteobtains , ac to dc eleminator 1.5 volt to 12 volt , ammetere with stand different ranges , bar magnet horse shoe magnet , bar magnetometre with campass , boiling tube with side , calorimetre with stirrer , convex concave lenses mirrors 3 , convex concave lenses mirrors3 , copper voltametre , drawing board 12 18 , drawing pin , dry cell 1.5 volt , fortain barometre , galvanometre with stand , glass slab 2 , measuring cylinder plastic 100 ml , measuring cylinder plastic 1000 ml , measuring cylinder plastic 250 ml , measuring cylinder plastic 500 ml , metre bridge four wire , mgnyfying glass with steel handle , milli ammetre with stand , milli volt metre with stand , mirror lense stand metallic , mirror lense stand wooden , optical bench , pendulum bob with hook 3 4 brass , pin with stand of various height , plain mirror with stand , plug key four way , plug key one way , plug key two way , pn junction diode , pnp npn transitor , polythene wash bottle 500 ml , p n junction diode , potentiometre , prism glass 2 , resonance tube apparatus , rubber tube , sahul brass , screw guage , slide calliper vermier , slotted weight for sonometre , sonometre , specific gravity bottle 25 ml. , spectrometer , spherometer , spiring balance 1000 gms. , spirit lamp metallic , stop watch digital , tapping key , thermometer rc , tunning fark pad , voltmetre with stand , wall thermometer , wooden cube wooden , zener diode charastrictic , p.o. box measurement , laboratory centrifuge , fly wheel experiment for store energy , mosfed characteristic , scr characteristic , digital electronic , newtons ring apparatus , travelling microscope , dial type resistance boxes , tangant galvanometer apparatus for , energy band gap apparatus , dip circle metallic body , weight box brass , six position microscope , sodium vapour lamp , transistor characteristic apparatus , rheostate 200mm lo , function generator , beaker 250 ml glass borosilicate glass , beaker 500 ml glass borosilicate glass , bell jar glass , bunsen burner with stop cork , chart , chromatographic papers , conical flask 100 ml borosilicate glass , conical funnel 3glassborosilicate glass , cork , desicator 6 , different type model , dissecting box , dissecting tray , hygro meter dry wet , iron stand with clamp and bosse head , measuring cylinder 100ml plastic , measuring cylinder 250ml plastic , measuring cylinder 500ml plastic , morter pestle 4 , museum spceimen general , permanent slide , petri dish 3 glass , reagent bottle wm nm 125 ml , slide plain glass , staning rack six tube , test tube hard glass borosilicate glass , tripad stand 6 6 best quality , wash bottle polythene500 ml , dissecting microscope , binocular microscope , student microscope large fixed stage , pathological microscop magnification , haemometer hb , haemocytometer , uv chromatography inspection , ph meter table type , deionizer , human articulated skeleton , prepared slides , magnetic stirrer , electrical ovens , photoelectric calorimeter , blood cell calculator , rotary microtome , autoclave vertical asbsusdus pad with frame , beaker glass 250 ml, borosilicate glass, beaker glass 500 ml,borosilicate glass , beurett 50ml. with teflon stop corck,borosilicate glass, burner with lock , china dish basin , conical flask 100ml borosilicate glass , conical flask 250ml borosilicate glass, conical flask 500ml borosilicate glass, conical funnel borosilicate glass, corck borrer set three borosilicate glass, cork pressure metallic, crushible with lid procillian, deflection spoon copper, dessicator , filter paper 11cm //bid details 2 / 133

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of self recording rain gauge , maximun minimum thermometer digital , screw gauge , prismatic compass with stand , auto dumpy level with stand and staff , abney level , robotic total station 1 inch accuracy bluetooth auto target , kerosene or gas stove or electric hot plate , ghat tracer , pegging rod , optical square 90 degree , ranging rod 3 mtr long , high precision binacular , temperature gun for checking bituminous surface works , sample tray enamelled , vibrating wire , termperature sensor , portable indicator , steel tape 5m , standard pyconometer of 50 ml , digital hygrometer , post hole auger with extensions , rodo meter - high precision wheel odometer , hot plates 200 mm dia 1500 watt voltage 220v to 230v , circular plates of 250 mm dia , sampling pipettes fitted with pressure and suction inlets, 10 ml capacity. , sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer , ennore standard sand 25 kgs bag , weighing machine 0 kg to 10 kgs , mould 15cmx15cmx15cm for compressive strength of concrete , digital vernier calipers accuracy 0.001 mm , thermometers mercuryinglass thermometer 0 to 250 c mercury-in-steel , glass thermometers range 0 degree c to 100 degree c 100 degree c , mortar cube 70 pt 6 mm , cbr plunger with settlement dial gauge holder , ring and ball app for softening point , specific gravity test bottle with vaccum pump , tripod stands for holding dial gauge holder , metallic laboratory thermometers range up to 300 c , spacers disc 148 mm dia 47.7 mm ht. with handle , comprising beakers capacity 1000 ml glassware , pipettes capacity 50 ml glassware , perforated plate brass , metallic thermometers range up to 300degree c 300 degree c , specific gravity and water absorption testing machine , marshall sample mould , stop watch one and half sec. accuracy , field density apparutus complete setsand relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion te

CTN :45235126

26 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - lot no.nws/guillotine shearing machine/05/26-27/10 description- condemned guillotine shearing m/c no. 23sh/44, make-m/s. wilhelmburger machine fabok hinrches, west germany with motor, 30kw (45 hp), starter and main switch = 1 no. materials to be sold "as is where is basis". note: (a) before bidding the bidders are requested to inspect the lot and approach road etc. (b) cutting will be allowed in presence of consignee or his authorised representative. (c) purchaser should undertake that the activity of gas cutting and dismantling is not any way to affect the railway daily work or endanger railway property or rly workers lives. (d) delivery will be in weight basis. (e) loading will be done by purchaser own arrangements under supervision of witnessing concern official only after entire dismantled of the machine. (f) if any excess quantity found of this lot the purchaser will return to custodian. (g) if any shortage of materials the value will be return to purchaser. (h) weighment of truck i.e. tare & gross has to be done electronic weigh bridge at amm/r-yard/kgp. (i) safety equipment during cutting to be arranged by the purchaser for his staff and ensure its use. (j) sse (w-mc)/shop-44/kgp electrical maintenance to ensure electrical or any other permission before cutting & delivery related to safety matter.(k) if any oil content found that to be safely decanted by the purchaser and return to consignee. (l) other terms & conditions are as per e-auction condition.

Private Sector

CTN :45256527

25 May, 2026 NA

Amravati - Maharashtra

Tender For procurement of goods digital weight bridge platform , digital load cell (30 ton), electronic weighing unit (it indicator) junction box remote display ,printer ,ci weight ,stamping

Central Government/Public Sector

CTN :45174694

20 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p.l. no. 98090124 condemned and unserviceable ferrous bearings with brass cage of sorts and sizes. [ 27.650 kgs. approx. average weight/piece] with / without grease. it is permitted to remove grease. undefaced bearings have to be defaced by purchaser. note:- cssd / goc electronic weigh bridge to be used for weighment.

Central Government/Public Sector

CTN :45049943

12 May, 2026 NA

Gadarwara - Madhya Pradesh

Tender For supply of weigh rail with sensors for electronic in motion railway weigh bridge as per rdso specification wd-29-misc-19 (rev.1) of 5.5 meter length of capacity 60 kg/m rail section including cost of freight loading & unloading , commissioning and stamping by weight and measurement department for eimwb installed at gadarwara station. [ warranty period: 30 months after the date of delivery ]

CTN :44952924

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - lot no. kgpw/ diesel generator set/04/2026-27/06 description- condemned diesel generator set, capacity 1750 kw, id no. sm/dg/11kv/03, sl no. dcw a/282-046311by (diesel engine); 10281009 (alternator), make: dlw (diesel engine); bhel (alternator) = 1 no. materials to be sold "as is where is basis". qty in mt (approx) 27.525 mt (ferrous = 25.980 mt non-ferrous = 1.428 mt nvd = 0.117 mt) note: (a) before bidding the bidders are requested to inspect the lot and approach road etc. (b) cutting will be allowed in presence of consignee or his authorised representative. (c) purchaser should undertake that the activity of gas cutting and dismantling is not any way to affect the railway daily work or endanger railway property or rly workers lives. (d) delivery will be in weight basis. (e) loading will be done by purchaser own arrangements under supervision of witnessing concern official only after entire dismantled of the dg set. (f) if any excess quantity found of this lot the purchaser will return to custodian. (g) if any shortage of materials the value will be return to purchaser. (h) weighment of truck i.e. tare & gross has to be done electronic weigh bridge at amm/r-yard/kgp. (i) safety equipment during cutting to be arranged by the purchaser for his staff and ensure its use. (j) sse/ssm/50/kgpw electrical maintenance to ensure electrical or any other permission before cutting & delivery related to safety matter.(k) if any oil content found that to be safely decanted by the purchaser and return to consignee. (l) other terms & conditions are as per e-auction condition.