Latest platform balance Tenders | Government platform balance Tenders

State Government

CTN :45613922

03 Jul, 2026 3.58 Lacs

Surat - Gujarat

Tender For providing, supplying and installation with testing demo of additional laboratory equipment for aggregate, cement and mix-design at quality control sub division, rander, dist. surat.- providing and supplying & installation with testing demo of vicat needle apparatus for testing of initial, final seeting time & consistency of cement test. one complete set. confirm to 18:5513 , providing and supplying & installation with testing demo off vicat mould, , providing and supplying & installation with testing demo of vicat glass plate, , providing and supplying & installation with testing demo of le-chatler mould including two glass plates and lead weight as per is set of six., , providing and supplying & installation with testing demo of le-chater flack, , installation with testing demo of slump test apparatus with tamping rod 16 mm dia x 600 mm long graduated., , providing and supplying & installation with testing demo of humidity chamber refrigerated-inner 8.8-45x45x45 cm-92 liter for temperature and humidity control with over temperature protection audio alarm system, , providing and supplying & installation with testing demo of servo voltage stabilizer -3kva-single phase for humidity chamber., , providing and supplying & installation with testing demo of humidifire with controler digital-confirming ito indian standard codes, , providing and supplying & installation with testing demo of whatman fliter paper-40 for blain air permeability test apparatus for fineness of cement, confirming to indian standard codes., , providing and supplying & installation with testing demo of precision electronic balance-600 gmm 01 gm (10mg)-confimming to indian standard codes., , providing and supplying & installation with testing demo of cement morter cube mould-7.06 cm-for cement confirming to indian standard codes (18 10080, 84031), , providing and supplying & installation with testing demo of 90 micron is sleve, , providing and supplying & installation with testing demo of gauging travel 8 anch. (200 mm)-confirming indian standard codes., , providing and supplying & installation with testing demo of temperature meter concrete, , providing and supplying & installation with testing demo of room temperature meter or thermo hygrometer, , providing and supplying & installation with testing demo of tds meter pen type, , providing and supplying & installation with testing demo of ph meter - pen type, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-100ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-250ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-500ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-1000ml, , providing and supplying & installation with testing demo of standard weight box-8.8.-1 mg-200 gm-class f1 (with nabl calibration), , providing and supplying & installation with testing demo of buoyancy balance with electronic balance 10 kg x 0.1 gm, , providing and supplying & installation with testing demo of 1.) distance piece-50mm height-nos 2.) distance piece-30mm, , height-inos, , machine, , providing and supplying & installation with testing, , demo of electronic platform, , balance-100 kg-, , 10 gm platform size 600 x, , , , providing and supplying & installation with testing demo of g.j. tray 1000x 1000 x 50 mm confirming to indian standard codes., , providing and supplying & installation with testing demo of bnd- ordinary portland cement standard specific area (blaine) one set surface, , providing and supplying & installation with testing demo of wash bottle 1000ml, , providing and supplying & installation with demo of spatula testing, , providing and supplying & installation with testing demo of fil

State Government

CTN :45463233

16 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, nitrile rubber seat for discharge valve of pan no. 8 as per drg. no.ksc/1022, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 22 12 6, 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, serial no

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of self recording rain gauge , maximun minimum thermometer digital , screw gauge , prismatic compass with stand , auto dumpy level with stand and staff , abney level , robotic total station 1 inch accuracy bluetooth auto target , kerosene or gas stove or electric hot plate , ghat tracer , pegging rod , optical square 90 degree , ranging rod 3 mtr long , high precision binacular , temperature gun for checking bituminous surface works , sample tray enamelled , vibrating wire , termperature sensor , portable indicator , steel tape 5m , standard pyconometer of 50 ml , digital hygrometer , post hole auger with extensions , rodo meter - high precision wheel odometer , hot plates 200 mm dia 1500 watt voltage 220v to 230v , circular plates of 250 mm dia , sampling pipettes fitted with pressure and suction inlets, 10 ml capacity. , sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer , ennore standard sand 25 kgs bag , weighing machine 0 kg to 10 kgs , mould 15cmx15cmx15cm for compressive strength of concrete , digital vernier calipers accuracy 0.001 mm , thermometers mercuryinglass thermometer 0 to 250 c mercury-in-steel , glass thermometers range 0 degree c to 100 degree c 100 degree c , mortar cube 70 pt 6 mm , cbr plunger with settlement dial gauge holder , ring and ball app for softening point , specific gravity test bottle with vaccum pump , tripod stands for holding dial gauge holder , metallic laboratory thermometers range up to 300 c , spacers disc 148 mm dia 47.7 mm ht. with handle , comprising beakers capacity 1000 ml glassware , pipettes capacity 50 ml glassware , perforated plate brass , metallic thermometers range up to 300degree c 300 degree c , specific gravity and water absorption testing machine , marshall sample mould , stop watch one and half sec. accuracy , field density apparutus complete setsand relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion te

State Government

CTN :45228153

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, nitrile rubber seat for discharge valve of pan no. 8 as per drg. no.ksc/1022, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 22 12 6, 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, serial no

Central Government / Public Sector

CTN :45146096

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12242ci26b, 98081317, quantity- 26.465 mts scrap condemned unserviceable ci material consisting of weights, wheels, color light body, color light base, weighing machines, ci valves, tracer valve, sequence valve, proportional systems control valve, ms-ci body of electric detectors, pean, peas, rcrb, leveling values, cocks un loader scale, non-return values, ci- ms hand pump, ci lift counter weight, isolating cock, drain valves, passenger emergency alarm valve, ci bmbc piston, pedestals, blocks, rollers, pump set bodies, base plates, moulds, gate valves, distribution valves cocks, boxes, hose pipe cocks, dirt collectors, brake units, trolley wheels, s and t wheels, lever boxes, pipes, structural and round ci bases, cut off angle cock, ci wsf ep unit value, wsfar bulb, cell base, lhb brake disc, wsf magnet, isolating cock, peasd, nrv, crp, axle compressor spare parts, ekt%u2019s, e type locks, control reservoir, ci anti vibration mounting pad, filter housing, hydraulic return line, ci vertical pneumatic value bmbc spares, ciwra bodies, cylinder heads, lhb brake disk, traction motor, pneumatic valves, water column stanchion, head turner cylinder, cooling fans, magnet valve and other ci material of sorts and sizes with or without attachments of ms. location- bin no-242, left side of road no- 2. hsn code- 72041000. gst- 18 percent note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery.

corporations/Associations/Others

CTN :45038964

07 May, 2026 NA

Multi City - Multi State

Tender For auction sale of empty carbouys_60 ltrs capacity_1 lot_rate per lot,air conditioner_1 lot _rate per lot,incubator,old electronic weighing scale _1 lot _rate per lot,empty ms barrels_200 ltrs capacity _1 lot _rate per lot_1 lot _rate per lot,empty ms paint tin_20 ltrs capacity _1 lot _rate per lot,old tyres,electricals & instruments scraps _1 lot _rate per lot,old led tv monitor,old computer spares _1 lot _rate per lot,old jumbo display for juice and water flow meter

Central Government / Public Sector

CTN :44852419

23 Apr, 2026 NA

Multi City - Telangana

Tender For corrigendum : auction sale of depot ferrous scrap - 12301ci26a, 98081317, quantity- 35.535 mts scrap condemned unserviceable ci material consisting of weights, wheels, colour light body, colour light base, weighing machines, ci valves, tracer valve, sequence valve, proportional systems control valve, ms-ci body of electric detectors, pean, peas, rcrb, levelling values, cocks un loader scale, non-return values, ci- ms hand pump, ci lift counter weight, isolating cock, drain valves, passenger emergency alarm valve, ci bmbc piston, pedestals, blocks, rollers, pump set bodies, base plates, moulds, gate valves, distribution valves cocks, boxes, hose pipe cocks, dirt collectors, brake units, pipes, structural and round ci bases, cut off angle cock, ci wsf ep unit value, wsfar bulb, cell base, isolating cock, peasd, nrv, crp, ekt%u2019s, e type locks, ci anti vibration mounting pad, filter housing, hydraulic return line, ci vertical pneumatic value bmbc spares, ciwra bodies, cylinder heads, lhb brake disk, pneumatic valves, water column stanchion, head turner cylinder and other ci material of sorts and sizes with or without attachments of ms. location- bin no- 301, left side of link road no- 1, while approaching from road no- 2 to road no-1. hsn code- 72041000. gst- 18 percent note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per motor vehicle act 1988.

Central Government And Public Sector

CTN :44366724

31 Mar, 2026 NA

Bhilwara - Rajasthan

Tender For corrigendum : supply of precision electronic balance , plax tp electronic weighing scale , platform balance , maintenance , handling service

Platform Balance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government / Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government And Public Sector