Latest plug tester Tenders | Government plug tester Tenders

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

State Government

CTN :45697547

10 Jul, 2026 NA

Kotdwar - Uttarakhand

Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, anti theft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlip pliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

CTN :45609224

08 Jul, 2026 NA

Patdi - Gujarat

Tender For supply of cut section model for pneumatic components with work station , drill gauges letter drill gauge , power tools for fastening capacity 10-18 , hand reamer set nominal dia. 6, 8, 10, 12, 16mm , surface roughness comparison plates n1 - n12 grade , anvil 50 kgs with stand , injector , ring groove cleaner , valve spring compressor universal , glow plug tester , drill point angle gauge , stethoscope engineering , arbor press hand operated 2 ton capacity , drill twist 1.5 mm to 15 mm by 0.5 mm , disk brake in working condition with caliper assembly with all parts , drum brake assembly in working condition brake drum , working model of power showing parts like door , cut section models of shock absorbers , cut section of cross ply and radial tyres , coll winding machines with counting meter , dynamo of automobile engine 24 v. d.c * /bid number : gem/2026/b/7672214 + /dated: 18-06-2026 ' ' / bid document 1 / 26

CTN :45516872

26 Jun, 2026 8.35 Lacs

Jafarabad - Gujarat

Tender For glow plug tester , oil pump for dismantling and assembling , surface gauge with dail test indicator plunger type 0.01mm , turbocharger cut sectional view , vernier calliper 0-300mm , water pump for dismantling and assembling , arbor press hand operated , diesel engine crdi 4stroke dismantling assembling with swivelling stand , multi scan tool with oscilloscope , chain pulley block capacity with tripod stand

CTN :45486249

22 Jun, 2026 40.75 Lacs

Kurukshetra - Haryana

Tender For purchase of lab equipment item for material testing laboratory as per nabl norms. - electronic balance 200 gm, accuracy 0.001 gm, standard weight box (stainless steel) 1 mg to 200 gm, variable flow type air permeability apparatus (blaine type)variable flow type air permeability apparatus (blaine type), whatman filter paper 40 (pkt. of 100 pcs), digital thermo hygrometer, mercury, stop watch digital 1/10 sec, electronic balance 1 kg capacity, graduated cylinder, length comparator, shrinkage bar mould (single), humidity chamber (heating), cement autoclave, le-chatelier water bath, steel scale 300 mm, le-chatelier mould, vicat apparatus with dashpot, vicat mould, electronic balance 6 kg 0.5gm readability., poking rod for cement, cube mould (70.6 mm), standard sand grade-i (25 kg bag), standard sand grade-ii (25 kg bag), standard sand grade-iii (25 kg bag), vibrating machine, automatic compression testing machine 500 kn, accelerated curing tank , gauging trowel, electronic balance 15 kg, cube mould (150 mm), automatic compression testing machine 2000 kn, vernier caliper digital 300 mm, measuring scale 300 mm, hot air oven 450 x 450x 450mm., water bath (28 ltr), electronic balance 10 kg capacity 1gm readability., concrete test hammer 10-100 proceq, anvil for concrete test hammer., ultrasonic pulse velocity apparatus, half cell potentiometer (rebar corrosion detector)

CTN :45326601

17 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For corrigendum : supply of equipment for logistics department - paper tearing test measuring range 0 to 1000 mn capacity resolution 0.1 mn indication error 1 % tearing arm 104 1 mm tearing angle 27.5 0.5 tearing distance 43 0.5 mm, paper puncture testing machine energy range of weights - 6, 12, 24 joule per meter accuracy - 2% within full range release angle of pendulum - 90 display - led (digital) 7 segment power - 220v, 50hz,single phase highlights: sample holder - 1 pendulum release mechanism -manual material -mild steel finish - powder coated havel gray & gray combination finish and bright chrome/zinc plating for corrosion resistant finish, weighing machine max capacity (max) maximum load the scale can measure. (3 kg ), min capacity (min) minimum load required for accurate measurement. (0.25 kg), 0.1 g 1 g resolution, sling psychrometer, bursting strength tester capacity: commonly 0 40 kg/cm . accuracy: +or -1 % of the full range (often within 10% to 90% of capacity). resolution: 0.1 kg/cm . operation: microprocessor-based, digital display (lcd/led) with peak hold test fluid: glycerin (approx. 98% purified). power requirement: 220v, single phase, 50 hz. memory. clamping: pneumatic or manual, often with 1/4 hp motor. fluid displacement rate: 95 + or 5 cc/minute., digital micrometer (0-25mm with least count 0.0010) (0 25 mm, 0.001 mm), digital vernier caliper (0-150mm)

Central Government/Public Sector

CTN :45024620

17 Jun, 2026 NA

Duliajan - Assam

Tender For corrigendum : supply of sample boq - casing head housing , slip seal assy , plug tester , casing head housing 20 inch , slip seal assy , spool , slip and seal assy , x type bushing , plug tester 114pt3 mm

Plug Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector