Latest polyethylene liner Tenders | Government polyethylene liner Tenders

Central Government/Public Sector

CTN :45297896

01 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of oh kit for controller assembly dynamic brake for hhp locos, consisting of 18 items as follows: 1) pin spring -3/16 diameter x 7/8 inch long (spiral pin modified) -kepco partno:100015 qty:2nos. 2) pin spring -1/8 diameter x 1 inch long (spiral pin modified) - kepco part no: 100019 qty: 1no. 3) pin spring -3/16 diameter x 1 inch slotted (spiral pin modified) - kepco part no: 100028 qty: 3nos. 4) pin spring -3/16 diameter x 1 1/2 inch slotted - kepco part no: 100032 -qty: 2nos. 5) pin clevis - 1.60 inches long - kepco part no: 100135 -qty: 2nos. 6) ring retaining -metric - kepco part no: 100039 -qty: 1no. 7) spring detent arm- kepco part no: 100042 -qty: 1no. 8) pin swivel - kepco part no: 100231 -qty: 2nos. 9) ring retaining - 1/4 - kepco part no: 100054 -qty:4nos. 10) spring reverser lock- kepco part no: 100055 -qty: 2nos. 11) spring clevis - kepco part no: 100080 -qty: 1no. 12) pin spring 3/16 diameter x 1-3/8 inches long - kepco part no: 100092-qty: 1no. 13) ring retaining - kepco part no: 100123 -qty: 2nos. 14) spring plunger - kepco part no: 100133 -qty: 1no. 15) socket bulb - kepco part no: 100085 -qty: 1no. 16) handle directional - phelolic - kepco part no: 100087 -qty: 1no. 17) bracket throttle handle - kepco part no: 100122 -qty: 1no. 18) screw 8-32 fcs for bush 7/16 - kepco part no: 100200 -qty: 2nos. make: kepco or equivalent supplied by approved vendors of master controller of emd locomotive, pl no: 17050455 are acceptable. hsn code: 86079100. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45264914

30 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of 2.2 kw ac crane drive , 5.5 kw ac crane drive , 11.0 kw ac crane drive , 22.0 kw ac crane drive , 37.0 kw ac crane drive , 55.0 kw ac crane drive , 75.0 kw ac crane drive 3 phase, digital ac crane drive 2.2 kw, ac drive should be suitable for heavy duty operation of 2.2 kw. offered ac drive should be suitable for crane-hoist operation. if, separate software required for crane application, it must be clubbed with supply of material. ac input voltage: 380 to 480v ac 10%, 3 phase, 3 wire, 50 hz; mode of control: bi-directional fully controlled 3-phase ac; speed regulation: 1% of base speed; braking: suitable dynamic braking resistance and chopper unit (external or in-built); acceleration time: 0.1 to 1000s or better; deacceleration time: 0.1 to 1000s or better; overload: 150%-1min, 200%-3.0s; ambient temperature: 0 to 50 c (derating shall not occur below 50 c. in the event that derating occurs below 50 c, the supplier shall provide a higher-rated drive to match the requirement); rated current at 50 c: min. current should be 5.5 amps at 50 c; high starting torque at low speed: 200% starting torque at 0.3 hz; two analog inputs: two nos. analog inputs having signal voltages of 0 to 10 vdc or 4 to 20 ma (configurable); two analog outputs: two nos. analog outputs having signal voltages of 0 to +/-10 vdc or 4 to 20 ma (configurable); six digital inputs: pnp/npn; one relay output: with short-circuit and overload protection; two digital outputs: with short- circuit and overload protection; brake release signals: outputs braking signals based on inverter operating conditions to prevent cargo bed rollback and overrunning; load adaptive control: when the actual load level is lower than the configured load level, the system can be operated at a ratio-multiplied speed (in terms of the configured frequency), resulting in significantly better efficiency; load ) /bid number : gem/2026/b/7563714 * /dated: 20-05-2026 & & / bid document 1 / 29 frequency), resulting in significantly better efficiency; load limiter: maintains the safety and rescuability of suspended loads by stopping when excessive torque is detected and by allowing operation only in the direction opposite to that in which the excessive load was detected; cooling capacity degradation alarm: detects and displays cooling capacity drop due to cooling fin clogging caused by dust and cooling fan airflow reduction; igbt life expectancy forecasting: estimates the power cycle life expectancy of the main circuit s igbt semiconductor device temperature due to frequent acceleration and deceleration stoppages, and displays the estimate before the design life is reached; protection: it must have all standard protections like stall protection, instantaneous power failure, single phasing, over voltage, under voltage, over current, inverter overload, thermal overload etc; display console: it must have alpha numeric display console for programming of drive, fault display and operating condition; dynamic qr code: it must have dynamic qr code for trouble shooting; tuning facility: it must have auto tuning facility. this must enable perfect matching of motor coupled to load with regards to optimum acceleration time, deceleration time, speed regulation etc; drive programming software: suitable drive programming software along with necessary connecting cable and adapter for connection with laptop and drive should be provided to get online with the offered drive (laptop not in scope); automatic voltage regulation: it must have automatic voltage regulation function to maintain high starting torque even at reduced voltage; regenerative option: it must be capable of regenerative operation; communication protocol: modbus (rtu/serial) or ethernet (tcp/ip); make of drives: fuji- electric/yasakawa/schneider/abb only; suitable dynamic breaking resistance unit of 60% wattage rating of drive, however the value of resistance is to be decided by manufacturer as per their technical manual for crane-ho

Central Government/Public Sector

CTN :45241067

16 Jul, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of fast acting dispresant solution, as per the specification attached at annexure a, for cleaningthe dynamic braking resistor (dbr) and brake blending resistor (bbr) fitted on emu/memu rakes. the material shall be procured from the oem or its authorized dealer only. make : black lotus, pci or ichem. (packing details : to be packed in 20 ltr. cans, and spray bottle (01 ltr) to be provided at least 10 nos. with po quantity.) [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45210418

28 May, 2026 NA

Raipur - Chhattisgarh

Tender For supply of resistor grid - dynamic brake - re3, re7 - 1.235 ohms - 545 amps emd part no.10634216, dlw pt .no.18250040 specn: emd part no.10634216, dlw pt .no.18250040 [ warranty period: 30 months after the date of delivery ] ]

CTN :45175749

23 May, 2026 NA

Kamrup - Assam

Tender For supply of be mri safedot , ao type external fixator set for tibia consisting of 2 x 300 mm long stainless steel tube 11 mm diacomma 6 x 5mm self drilling or tapping shanz screwscomma 12 x single pin to , ao type external fixator set for femur consisting of 2 x 400 mm long stainless steel tube 11 mm diacomma 6 x 5mm self drilling or tapping stainless steel shanz screws 12 x single , universal mini external stabilization system set completecomma jesscomma for ctev large , kirschner wirecomma 250 mm long x 1dot 0 mm diacomma both ends trocar point , kirschner wire 250 mm long x 1dot 5 mm diacomma both ends trocar point , kirschner wire 250 mm long x 2dot 0 mm diacomma both ends trocar point , kirschner wirecomma smoothcomma length 150 mm with double trocar tip 1dot 5 mm to 3 mm at 0dot 5 mm incrementsdot , kirschner wire 15 cm long x 1dot 5 mm diacomma both ends trocar point , kirschner wire 15cm x 2mmcomma both ends trocar , drill bit dia 3dot 5 mmcomma long , drill bit dia 4dot 5 mmcomma long , tibia nailing system expert type titanium consisting of expert tibial nail 1 noscomma locking bolt 5 noscomma endcap 1noscomma size dash9 , soft roll compressed ortho cotton 10 cm , saw blades for conmed saw system , 3dot 5mm distal tibial medial locking plates for rightslash left at least 6 holes in head and 4 dash 12 hole shaft with 8 x locking and cortical screws complete construct titanium , trauma drape pack for upper limb consisting of one impervious u drapecomma one impervious o drapecomma 4 x large sheetscomma two cling films and anaesthesia , ortho surgical gown sterilecomma disposable waterproof wrap around type mediumcomma largecomma extra large dot aami 4 , trauma drape pack lower limb consisting of one impervious u drapecomma one impervious o drapecomma 4 x large sheetscomma two cling films and anaesthesia isolation s , high viscosity bone cement with antibiotic dash40 gm , ultaporus acetabular shell with compitable crosslinked polyethylene liner with 2 screws size 44slash 46 , primary uncemented proximally coated hip stem collarlesscomma taper wedge titanium stem with slim ap dimension proximally coated available in standard and extended , primary cemented polished taper hip system consisting of polised taper femoral stem with centralizercomma compatible metallic femoral head and polyethylene , biolox delta ceramic liner and gription coated acetabular shell for hip reconstruction , primary uncemented fully coated hip stem collarlesscomma reduced lateral shoulder taper wedge titanium stem with compatible biolox delta ceramic head size 1slash , 2dot 4slash 2dot 7 mm volar distal radius locking plate with 5 holes in horizontalslash oblique distal part in a single row and 2 holes in longitudinal part of plate with 5 x , titanium elastic nails 1dot 5 mm dash 4dot 5 mm dia , 3dot 5mm t dashplate buttress plate comma right angledcomma 4 transverse and 2 dash 7holes along long axis with self tapping cortical screws complete construct titanium , supra condylar nail surgical grade titanium complete constructdot , herbert screw size 2dot 4mm length 18 dash 24 mm dot full quality assurance titanium , interlocking cannulated anatomical femoral nails trochantric entry 5 dash7 degrees proximal offset right dot proximal locking options dash gt to lt locking 2 titanum , ao pattern 4dot 5 mm titanium lcp narrow 8 dash 14 holes with locking and cortical screws complete construct , ao pattern locking compression plates 6 dash14 holes 3dot 5mm with locking and cortical screws complete //bid details 2 / 42 constructdot titanium , ao pattern 1slash 3rd tubular platescomma 3dot 5mm comma 8 holes comma 316 lvm stainless steel with compatible 6 x3dot 5mm cortical self tapping and 2x3dot 5mm , ao pattern 1slash 3rd tubular platescomma 3dot 5mm comma 10 holes comma 316 lvm stainless steel with compatible 6 x3dot 5mm cortical self tapping and 2x3dot 5mm titanium , antirotation proximal femoral nailing system consisting of antirotation proximal femoral

Central Government/Public Sector

CTN :45019312

05 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot miscellaneous scrap - ubl/gsd/254/grid/25/h [pl no.98411214] condemned and un- serviceable grid scrap consisting of (a) resister grid dynamic brake - 10 nos ( nft- 07 ft-03 ) (b) db grid assm - 39 nos ( nft-26, ft-13) with/without ms/any attachment. available under the custody of cdms/rs ward/gsd/ubl. location:- road no.02 gsd/ubl bin no:-254. note: bidder has to physically inspect the lot before bidding. remarks-. delivery should start from one end. no pick and choose allowed.

Central Government/Public Sector

CTN :45012762

11 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of oh kit for controller assembly dynamic brake for hhp locos, consisting of 18 items as follows: 1) pin spring -3/16 diameter x 7/8 inch long (spiral pin modified) -kepco partno:100015 qty:2nos. 2) pin spring -1/8 diameter x 1 inch long (spiral pin modified) - kepco part no: 100019 qty: 1no. 3) pin spring -3/16 diameter x 1 inch slotted (spiral pin modified) - kepco part no: 100028 qty: 3nos. 4) pin spring -3/16 diameter x 1 1/2 inch slotted - kepco part no: 100032 -qty: 2nos. 5) pin clevis - 1.60 inches long - kepco part no: 100135 -qty: 2nos. 6) ring retaining -metric - kepco part no: 100039 -qty: 1no. 7) spring detent arm- kepco part no: 100042 -qty: 1no. 8) pin swivel - kepco part no: 100231 -qty: 2nos. 9) ring retaining - 1/4 - kepco part no: 100054 -qty:4nos. 10) spring reverser lock- kepco part no: 100055 -qty: 2nos. 11) spring clevis - kepco part no: 100080 -qty: 1no. 12) pin spring 3/16 diameter x 1-3/8 inches long - kepco part no: 100092-qty: 1no. 13) ring retaining - kepco part no: 100123 -qty: 2nos. 14) spring plunger - kepco part no: 100133 -qty: 1no. 15) socket bulb - kepco part no: 100085 -qty: 1no. 16) handle directional - phelolic - kepco part no: 100087 -qty: 1no. 17) bracket throttle handle - kepco part no: 100122 -qty: 1no. 18) screw 8-32 fcs for bush 7/16 - kepco part no: 100200 -qty: 2nos. make: kepco or equivalent supplied by approved vendors of master controller of emd locomotive, pl no: 17050455 are acceptable. hsn code: 86079100. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44992356

15 May, 2026 NA

Cuttack - Odisha

Tender For supply of rheostat assembly dynamic brake emd pt no. - 8354311 as per specn. emd pt. no. - 8354311 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44882316

21 Apr, 2026 NA

Multi City - Karnataka

Tender For corrigendum : auction sale of depot miscellaneous scrap - ubl/gsd/251/a/grid/26/a [pl no.98411214] condemned and un- serviceable grid scrap consisting of resistor (a) resister grid dynamic brake(nft) 44 nos (b) resistor grid dynamic brake(ft)-06 nos with/with-out ms/ss/nfs attachment. available under the custody of cdms/rs ward/gsd/ubl.location:- road no.02 gsd/ubl bin no:-251/a note: bidder has to physically inspect the lot before bidding. remarks-. delivery should start from one end. no pick and choose allowed

Central Government/Public Sector

CTN :44901262

04 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of resistor grid dynamic brake-re 3,re 7-1.235 ohms-545 amps to dlw drg. no. 10634216 alt. "ea", (dlw pt. no. 18250040) specs:- [ warranty period: 30 months after the date of delivery ]

Polyethylene Liner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors