Latest polymerase chain reaction equipment Tenders | Government polymerase chain reaction equipment Tenders

CTN :40870271

25 Jul, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of automatic weather station , software with license , peripheral equipment , data terminal-display with printer , installation materials and accessories , system cables-cable assemblies-connector , on board spares , special tools and test equipment , documentation , service of engineer , training

corporations/Associations/Others

CTN :41106206

24 Jul, 2025 23.42 Lacs

Chandigarh - Chandigarh

Tender For supply and fixing of open air gym and gymnastic equipments in green belt and various parks of sector 34,35 and 43,,chandigarh under ward development fund - supply & fixing of sur board functions: by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel footrest / foot paddle for long lasting life, supply & fixing of space walker space walker complete in all respect having following specifications1. all pipes should used in the equipment should be galvanized with 3 mm thinness 2. multi coulor powder coating with polyester paint should be used on all the equipments 3. the foot padel on all the equipments should be aluminum only4. the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 all alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no. less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 the minimum height of the edge of the swing components is no.t less than 80 mm 11 hazardous materials like coating agent, rubber are under national newest standard.12 reduce of edge is no. less than 3.0 mm13 the diameter is roating shaft is no.t less than 40 mm functions the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. , supply and fixing of seated pedal trainer leg shaper complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 all alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no. less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no. less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages., supply and fixing of wa

CTN :40902593

31 Jul, 2025 NA

Mathili - Odisha

Tender For corrigendum : supply of solar technician trade equipment - rooftop mounting structure , electrical wiring and switch gear rack , protective relays and contactors rack , cables for demonstration , array junction box , solar lantern assembly sets , solar cell kit for trainers demonstrator kit , clinometer , dc table fan for trainer demonstrator kit , kilo wattmeter analog , digital wattmeter , dc led lamp , dc pump for trainers demonstrator kit , pwm controller for trainers demonstrator kit , mppt charge controller for trainers demonstrator kit , solar pcu for trainers demonstrator kit , solar grid tied inverter demonstrator kit , solar street light for trainers demonstrator kit , solar wind and hybrid power plant , solar traffic light for trainers demonstrator kit , used water treatment solar plant demonstrator kit , solar dc pump for trainer demonstrator kit , demonstration kit for wind generation , electrical symbol and accessories charts , solar photovoltaic module , scriber , electrical loads , wiring board , load bank , pyrheliometer , magnetic flux meter , weather monitoring system demonstration kit , solar cell based sunlight radiation meter , cut models of photo voltaic cell assembly , cut model of lead acid battery , solar simulator for solar cell characteristic study , iv curve tester , sun path finder , solar energy trainer with grouping of solar cells , solar tracker demonstration kit , solar pv elearning software , halogen lamp with stand , solar charge controller with dusk to dawn , solar charge controller with manual switch , hammer cross peen with handle , first aid kit

CTN :41074717

05 Aug, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of router , exchange 48 line with 48 volt fcbc , l2 switch 24 port 2 x sfp , integrated access device , ups 5 kva with 1 hrs battery backup incl battery rack , weather proofing system with 4 kva stabiliser , programming terminals , led display unit 55 inch tv , fire fighting ball , sip audio phone , analog phone , modular fcbc 48 volt 25 amp , portable earthing , 24u rack with pdu wheel based , all in one computer with head phone and mic , power cable coper wire two point five sqmm , patch panel 24 port , cat 6 patch cord 3 mtr , utp cable cat 6 305 mtr , lecture stand , equipment display board , airborne comn platform drone , customised work station wall mounted foldable table incl chair , change over 63 amp , hdmi cable 15 mtr , clamp meter , hdmi splitter 1 x 4 incl 1 mtr hdmi cable , installation testing commissioning and 3 years warranty cost of all equipment

CTN :41074736

05 Aug, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of router,48 line exchange,l2 switch 24 port with 2 sfp,weather proofing system with 4 kva stabilizer,programming terminals,led display unit 55,sip audio phone,chemical earthing,24 u rack with pdu wheel based,all in one computer with headphone and mic,hdmi cable 15 mtr,hdmi switcher 8 port,optical fiber cable 12 core,splicing machine,otdr,interactive panel 65 inch,10 kva stabilizer with 100 mtr power cable and change over switch,cctv solution with 4 cctv camera 8 port poe switch and nvr with 1 tb hdd,audio system with 06 speaker and 100 w amplifier,airborne comn platform,integrated access device,sip video phone,nfs console,customised work station,equipment display boards,installation commissioning and 3 years warranty cost

corporations/Associations/Others

CTN :41014048

18 Jul, 2025 NA

Kolkata - West Bengal

Tender For instalatiopn of open air-gym equipment at ashapurna devi smriti uddyan at ward no-110 - supply and installation of pull chair dual/dual pull chair with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.all pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 2300 x 700 x 2100 mm, supply and installation of leg press dual/ dual leg press station with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.uv-fully resistantall pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 2300 x 500 x 1900 mm, supply and installation of air walker/air walker station with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.uv-fully resistantall pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 1100 x 550 x 1300mm, supply and installation of rower/rowing machine with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from

CTN :41055758

22 Jul, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of ballistic environmental computer weather analytical equipment , carry case , battery set , cleaning kit , charger

Central Government/Public Sector

CTN :40996442

29 Jul, 2025 NA

Numaligarh - Assam

Tender For supply of deluge system equipment for msb unit for nrep - a. deluge water spray systems (mvws system + water curtain system + hvws system)cs deluge valve with dry pilot trim & electric release trim, horizontal inlet & horizontal outlet, without skid, ul/fm approved, complete with dry pilot trim with test, alarm & drain devices, local deluge valve control station (dvlcs) (1 no. per dv), pressure transmitters (02 nos per dv.), 3/3 way sil2 certified intrinsically safe solenoid valve-24v dc (1 no. per dv), pressure gauges (03 nos. per dv), air filetr regulator (afr)(1 no. per dv), air vessel of adequate capacity (1 no. per dv), etc. in compliance with the scheme shown in attached "technical data sheets for fire fighting & safety equipment (tk-1p21a-sa-dat-0001)".the deluge valves shall be supplied with the trim and associated instruments duly assemblied with the deluge valve and with suitable packaging to avoid damage during transportation. the upstream strainer, block valves and by-pass valve including the pipes connecting to these items are not in bidders scope of supply.all items shall be suitable and certified for zone 1,iic,t3 area classification. all electrical and instruments shall be certified for intrinsically safe (ex-ia) and solenoid valve shall be certified to explosion proof (ex-d). all instruments and enclosures (junction boxes/ cabinets/panels/ accessories) in field shall be dust proof and weather proof with ip-67., 200 mm nb, 150 mm nb, 100 mm nb, 80 mm nb, mvw spray nozzle with 1/2" mnpt end connection, moc - stainless steel, ul / fm listed, (with inbuilt strainer): size 15 nb, mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-22, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-22, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-26, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-26, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-35, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-35, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-41, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-51, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-51, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-79, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., quartzoid bulb detect

Central Government/Public Sector

CTN :40977695

28 Jul, 2025 NA

Khorda - Odisha

Tender For supply of supply of 2 megapixel outdoor colour ptz camera , supply of 2 megapixel outdoor fixed ir colour bullet camera , supply of 2 megapixel indoor fixed colour dome camera , supply of 32-channel nvr , supply of 24 port l2 switch , supply of 8 port l2 switch , supply of 2x2 46-inch thin bezel led videowall displays with controller , supply of workstation , supply of network time protocol server , supply of laptop , supply of pvc conduit , supply of optical fibre communication outdoor cable , supply of cat-6 utp data cable , supply of 3 core 1.5 sqmm power cable , supply of 3 core 6 sqmm power cable , supply of power distribution panel , supply of pdu , supply of cat-6 patch cords , supply of lc-lc single mode patch cords , supply of 9u rack with pdu , supply of 12-port light guide interconnect unit , supply of media converter , supply of 7- inch pole mount weather proof rack , supply of gi pole , laying of 25 mm dia mms pvc conduit , laying of ofc cable, cat-6 cable and 3 core 1.5 sqmm multi-strand power cable , laying of 3 core 6 sqmm multi-strand power cable , installation of gi pole , excavation and backfilling , road cutting and backfilling , equipment earthing , installation, integration, testing, commissioning of the complete system , training and documentation , removal of old cameras and keeping at safe designated place , providing, operating and logging parameters and other routine maintenance of scctv system during warranty period

State Government

CTN :40985789

28 Jul, 2025 3.50 Crore

Mohali - Punjab

Tender For purchase of biomechanical lab - force platedimensions (w x d x h) in mm : 600 x 400 x up to 50 number of axes for force measurement: all 3 axes. x,y,z plate should be portable in naturesensor type: piezoelectricsampling frequency-(hz) =1000 hz or more force measured on each axis-fx,fy: 2,000 newton or more, fz: 10,000 newton or more hysteresis- (%fso): 0.5 linearity (%fso) 0.5 crosstalk (%) : 2water resistance rating: ip 50 or better.should be inclusive of installation.should be supplied with carrying case for 2 plates and noise free ups for on-ground assessment. the carrying case should be strong and sturdy.should be able to accommodate portable force plate 9286 ba, daq box 5695 and connecting cablesshould be able to protect the equipment from rain, impact and dust, should have rollers to move easilyshould be able to accommodate an ups also., isokinetic dynamometershould be able to access/test various joints in isolation should be able to meet requirements to test sports personsshould be able to test in different resistance modes such as isokinetic (concentric-concentric, concentric-eccentric ,eccentric, concentric ,and eccentric-eccentric), isotonic, isometric, and passive protocols should include options for angles, hold-times, rest period, repetitions, and sets. the system should be able to test all the major body segments and joints such as shoulder, forearm, elbow, wrist, hip, knee, and ankle.should have adjustable range of motion stops in full 360 degrees.should have 360-degree rotation for the force arm (connecting dynamometer to the pedal) to have wide range of motionshould be able to accommodate different athletes with varying height and weight with provision for seatbelt harness for better stabilitythe dynamometer or chair should be movable to accommodate different athletes for quick set-up and better usability with locking clamps for securing the system in place for testingshould be able to do gravity correction when the limbs are positioned with the lever arm on the dynamometerthe software should be provided to analyze the raw data and export the raw and processed data in different file formats such as excel, text, etc. the software should provide detailed report for various testing protocols such as individual test for joints, data/graph overlay for comparing pre and post testing, repeatability, progress, multi-session.should be provided with latest compatible workstation/laptop of reputed brand like hp, dell (latest generation) processor, minimum16gb ram, windows os 11, and laser printerconcentric speed: 500 deg/sec or more eccentric speed: 500 deg/sec or more concentric torque: 500 ft-lb (678nm) or more eccentric torque: 500 ft-lb (678 nm) or more isometric torque: 500 ft-lb (678 nm) or more isotonic torque: 500 ft-lb (678 nm) or more isotonic torque as low as .5 ft-lbfeedback formats: roadway, interactive line, interactive path, reaction training, proprioception training, breakout, and pong.torques. time, torques. angle, torque bars, work bars, power bars. it should be possible to use mechanical stops even with custom patterns (important for safety in research)the same attachment should be usable for left and right side of subject for consistencies in data.should be certified and approved by ce/eu medical devices directives or usfda, nord boardit should be portable and should have 2 load cell sensors per unit with easy to attach hooks pivoting 360 degrees joint improving sensor accuracy it should have knee position indicator for replication of test position in each time. should have sample rate per sensor: upto 400hz, capacity per sensor: 100 kg/980-1000n safe over load per sensor: 150kg/1500n, max over load per sensor: 200kg/ 2000n, resolution: 1n and sensitivity: 22.0+/-mv/v. should have rechargeable battery & battery life should be100 active hours approx. should have working temperature range 5-40 c. (all weather proof) latest upgradable software should have both wired & wireless connectivity connec

Polymerase Chain Reaction Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government