Latest polymerase chain reaction equipment Tenders | Government polymerase chain reaction equipment Tenders

Central Government/Public Sector

CTN :45546929

02 Jul, 2026 NA

Multi City - Multi State

Tender For supply of pressure gauge , to sanrok part no.-029720182 or similar for automatic fire suppression system as per rdso specification no. is/rdso/cg/s/22001 or latest. it must be compatible with sanrok make fire system also test report and calibration certificate required. [ warranty period: 30 months after the date of delivery ] ]

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45474976

08 Jul, 2026 NA

Chandipur - Odisha

Tender For expression of interest for developement, supply, installation and commissioning of dynamic pressure calibration system with accessories at pxe

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

CTN :45467505

29 Jun, 2026 15.00 Lacs

Lucknow - Uttar Pradesh

Tender For supply of sitc revival rectification commissioning of phase 1 system 1 and system 3 including receivers tracking piping insulation mirrors and all accessories , sitc steam generation monitoring system pressure tempreature steam flow data logging scada dashboard reporting trainning , cmc for 1 years comprehensive including preventive and breakdown maintenance reporting calibration and sla compliance , cmc for 2 years comprehensive including preventive and breakdown maintenance reporting calibration and sla compliance , cmc for 3 years comprehensive including preventive and breakdown maintenance reporting calibration and sla compliance , cmc for 4 years comprehensive including preventive and breakdown maintenance reporting calibration and sla compliance , cmc for 5 years comprehensive including preventive and breakdown maintenance reporting calibration and sla compliance

Co-operative

CTN :45444048

20 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin

CTN :45419869

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For providing of calibration services - mechanical, calibration of load cells for multipoint hydraulic actuator system; pressure and vacuum, force; nabl labs; buyer premises (onsite)

Central Government/Public Sector

CTN :45372887

08 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of flash back arrestor(dry type) for regulator end of acetylene/lpg lines to prevent flash backs in oxy fuel system conforming to en 730/iso 5175-1/is 11006 standards with flame arrestor(fa) and non return valve(nrv) and thermal cut off valve(tv) working pressure: 1.5 bar for acetylene/5.0 bar for lpg. end connections g 3/8 lh to en 560/iso 3253 standards. make: messer(dgn fuel) or esab(protex ra) or gce(fr-34 r fuel) only. note:1) offers of oems or their authorised dealers enclosing valid authorised dealership certificate only will be considered. 2) the suppliers shall send test certificate from govt. authorised test house. in case of international brand, the test certificate from reputed institute like bam, germany is mandatory. 3) the suppliers should have equipments for testing of flash back arrestors and calibration. the purchaser has the right to inspect these installations. as per specn. en 730/iso 5175-1/is 11006 . [ warranty period: 30 months after the date of delivery ] ]

CTN :45245157

02 Jun, 2026 97.01 Lacs

Chhabra - Rajasthan

Tender For supply along with service support of the of forbes marshall make spares of the swas system and supply of spares for the oxygen analyzer oxitec 5000 for unit # 1 to 4, ctpp, chhabra - ph measurement, ph sensor model (fm1104) range: 0-14, 05meter connecting cable includedmake : forbes marshall pvt. ltd.model : fm1104 cable : 5m connecting cable included, buffer amplifier for ph sensor fm1104 with 6 core cable 30 mmake-forbes marshall, dual channel ph analyser with controller and display make-forbes marshall,model-aqua4trans,transmitter : 4-wire 2 channel aqua4trans,part no. a4t-p-0-1-1-1-00, output : 4-20ma, ph buffer solution for ph 7 and ph 9.21 , 500 ml each, conductivity measurement, specific conductivity sensormake- forbes marshall,part no. - fgf4wfm8311, cation conductivity sensormake- forbes marshall,part no. - fgf4wfm8310, cable for conductivity elctrode fm831x length 15 mtr make- forbes marshall,part no. -fgf4wm4e-ccable15m, dual channel conductivity analyser with controller and display, aqua 4 trans 4 wire dual channel conductivity analyser with controllerand display (k 0.1)make - forbes marshall , transmitter 4 wire 2 channel aqua4-trans 1 nos, part no:a4t-p-0-3-3-1-00 , output 4-20 ma, aqua 4 trans 4 wire dualchannel conductivity analyser withcontroller and display k 0.01)make : forbes marshalltransmitter : 4-wire 2 channel aqua4trans-1 no.part no. a4t-p-0-3-3-1-00output : 4-20ma, sampling accessories, high pressure isolation globe valvemake-forbes marshal,model no. vkinm11.2500.1/2:17.41,s.n. fgi 815, high pressure reducermake-forbes marshal,part no. c4w-relisafe-prf4w2011570,as per asme ptc 19.11 standard,moc:ss316,end connections:1/4" od, back pressure regulatormake-forbes marshal,part no. fgf4w2011720, spares of the oxygen analyzer oxitec 5000, thermocouple with sleeve tube for o2 probe kes5003part no. :- c4n-kes5003tc, oxygen measuring zirconia cell for o2 probe kes5003part no. :- :-c4n-zo2-0002zro2 oxygen measuring cell (for safe probes)complete with gasket and va screws p/n. zo2-0001, heater for o2 probe kes5003internal part no. :- c4n-5003heater, probe heater with inconel covering for kes5003probe, p/n.hei-2003, ceramic filter for o2 probe kes5003part no. :- c4n-o2-spares-00111,o2 analyzer,spares,part ofprobe,basalt filter with cement,for highdust application, protection pipe for o2 probe kes5003part no. :- c4n-o203-c11x,o2 analyser,protection tube suitable forkes2003 & kes5003 probe,4processconnection,ss316l,with suitable site flangeand gasket, sov for o2 probe kes5003part no. :- c4n-solvalve,test gas electrosolenoid valve for auto calibration,110 vac supply operated

Polymerase Chain Reaction Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

Central Government/Public Sector