Latest porcelain insulator Tenders | Government porcelain insulator Tenders

corporations/Associations/Others

CTN :45741815

06 Jul, 2026 NA

Jamnagar - Gujarat

Tender For work of replacement of porcelain insulators by sri in 220kv & 132kv flyover bus and auxiliary bus at 220kv jamnagar s/s with olm buyback under jamnagar (am) division under jamnagar circle.

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45506517

07 Jul, 2026 NA

Chamoli - Uttarakhand

Tender For corrigendum : supply of digital dc insulation tester (meggar) , digital micro ohm meter , digital winding resistance ohm meter , automatic 3-ph transformer turns ratio tester , portable cable fault locator , portable earthing resistance measuring device

Central Government And Public Sector

CTN :45728587

03 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of digital high voltage insulation tester . test voltage 250v to 5 kv insulation resistance measurement range up to 1 tera ohm with polarization index (pi) and di electrical absorption rate (dar) testing facility , make: fluke/flair/teams or similar. [ warranty period: 30 months after the date of delivery ]]

CTN :45247543

14 Jul, 2026 16.83 Lacs

Jaipur - Rajasthan

Tender For corrigendum : insulation resistance tester

CTN :44631490

02 Jul, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of tools and hardware e e - ss m10 eye bolt- internal dia 30mm- length 40mm-30mm thread and 10mm shank with nut and washer , ss m12 eye bolt- internal dia 30mm- length 40mm-30mm thread and 10mm shank with nut and washer , m10 bolt- length 70mm-25mm thread and 45mm shank with nut and washer , m16 bolt- length 75mm-20mm thread and 55mm shank with nut and washer , m24 bolt- length 110mm-30mm thread and 80mm shank with nut and washer , m20 bolt- length 60mm-30mm thread and 30mm shank with nut and washer , m8 hexagonal bolt- length 40mm-30mm thread and 10mm shank with nut and washer , m8 hexagonal bolt- length 60mm-30mm thread and 30mm shank with nut and washer , m10 hexagonal bolt- length 40mm-30mm thread and 10mm shank with nut and washer , m12 hexagonal bolt- length 40mm-30mm thread and 10mm shank with nut and washer , m10 hexagonal bolt- length 150mm-50mm thread and 100mm shank with nut and washer , m12 hexagonal bolt- length 150mm-50mm thread and 100mm shank with nut and washer , ms platform step ladder- height 5 feet- platform size 400mmx300mm and 5 step , aluminum platform step ladder- height 7 feet- platform size 300mmx300mm and 8 step , steel measuring tape- 15m , steel measuring tape- 3m , emery cloth medium j29780 , steel tailor scale-300mm , steel claw hammer- handle 350mm and dia of head 40mm , wooden work bench- l 1500mmx w 900mmxh 1200mmxt 20mm , square wood fixed stool with footrest- height 600mm and top base thickness 20mm , screwdriver-size of the head m2 poin t2- length of blade 125mm- handle length 80mm , exam pad , thinner , white colour chalk , liquid handwash , rust remover solution- 400ml , heat resistance paper masking tape- width 25mm and length 40m , cotton canvas hand gloves- small size 300mm , electrician scissor wire stripper- l-150mm- w-8mm- h-30mm , soldering iron 60 watt , handheld digital multimeter , spike guard 4 socket- 4 switch- 4 mtr with 6 amp , temperature controlled soldering station with digital display , programmable handheld amateur walkie talkie , nylon cable tie- 150mm length , nylon cable tie- 450mm length , nylon cable tie- 300mm length , scissors- overall 118mm and blade length 56 point 6mm , miniature screwdriver set , insulation tape , mild steel power hacksaw machine , cast combination vise with anvils and pipe gripping jaws bench vise , hacksaw blade- l-300mm- w- 25mm- t- 1 point 25mm , ss cut-off wheel- dia-355mm- thickness- 3mm

CTN :45736881

21 Jul, 2026 NA

Malda - West Bengal

Tender For supply of 1x16 sq.mm (red, black,green), multi strand copper power wire as per is is: 694/2010. or latest. 126 conductor each dia 0.40 mm +/-0.01 with insulation thickness of 1.0 mm and nominal conductor resistance of 1.21 ohm/km and test parameters as per rdso spec.no-irs:s-76/89(amnd.3) or latest.make- indigenous or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45737172

21 Jul, 2026 NA

Malda - West Bengal

Tender For supply of 1x10 sq.mm (red,black, green) with multi strand copper power wire as per is 694:2010. or latest. 140 conductor each diameter 0.30 +/-0.01 with insulation thickness of 1.0 mm and nominal conductor resistance 1.91 ohms km and test parameters as per rdso spec.no.irs s-76/89 amd. 3 or latest .make- indigenous or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45737173

21 Jul, 2026 NA

Malda - West Bengal

Tender For supply of 1x35 sq.mm (green), multi strand copper power wire as per is is: 694/2010. or latest. 276 conductor each dia 0.40 mm +/-0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 0.554 ohms/km and latest parameter as per rdso spec.no-irs:s-76/89 (amnd 3) or latest. make- indigenous or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45551266

01 Jul, 2026 NA

Kharagpur - West Bengal

Tender For w acting for and on behalf of the president of india invites e-tenders against tender no e-73-dyceekgpw-cbc-26-27 closing date/time 01/07/2026 15:00 hrs. bidders will be able to submit their original/revisedbids upto closing date and time only. manual o ers are not allowed against this tender, and any such manual o erreceived shall be ignored.1. nit headername of workupgradation of cbc overhauling section and corrosion repair shop of wagonrepair shop, kharagpur workshop.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime01/07/2026 15:00date time of uploadingtender09/06/2026 16:38pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 2402108.76tendering section elegenbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 48100.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 17/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-cost of supply of material for electrical work1712792.421a12.00numbers383500.00 767000.00 at par 767000.00description:- supply of incoming 1x 630a,4p, 50ka mdo type microprocessor based acb withipr1+ release & outgoing (i)2 x 320a,4p, 36ka thermal magnetic release with adjustable thermal &fixed magnetic mccb (ics=100%icu),(ii)2 x 200a,4p, 36ka thermal magnetic release withadjustable thermal & fixed magnetic mccb (ics=100%icu),(iii)4 x 100a,4p, 36ka thermal magneticrelease with adjustable thermal & fixed magnetic mccb (ics=100%icu) tted in lt panel box14swg crca sheet powder coated 4way cu busbar of suitable rating, indicator lamp, digitalmultifunction meter & all other accessories. mccb & acb make:- havellls/ lk/ schneider/siemens.2a210.00numbers 400.02 4000.20 at par 4000.20description:- supply of mcb metal enclosure 4 pole3a380.00numbers 413.00 33040.00 at par 33040.00description:- supply of pyramid insulator as per drawing4a470.00numbers 531.00 37170.00 at par 37170.00description:- supply of pin type insulators as per drawing.5a550.00numbers1121.00 56050.00 at par 56050.00description:- supply of gi-angle (40 x 40 x 06 mm) bracket 4 way with porcelain insulator as perdrawing suitable for overhead light.6a610.00numbers 248.98 2489.80 at par 2489.80description:- supply of mcb metal box 2 pole7a720.00numbers1323.96 26479.20 at par 26479.20description:- supply of 16/20/25a power unit (containing 4 module plate, starter, socket and plug)for ac unit.8a85.00numbers11434.20 57171.00 at par 57171.00description:- supply and testing of oscillating type bldc pedastal fan, 230 v,400 mm sweep,multi speed, remote/button controlled make- atomberg, havells, crompton, bajaj, usha, orient.9a9 150.00 metre1150.50 172575.00 at par 172575.00page 1 of 18run date/time: 09/06/2026 16:38:46kgp-workshop-electrical/south eastern rlytender documenttender no: e-73-dyceekgpw-cbc-26-27closing date/time: 01/07/2026 15:009description:- supply of hot dip galvanized 2mm thickness perforated cable tray of size 300 mmwidth and 50 mm height and complete accessories as per is, ie rules and site requirement10a10 50.00 metre 575.25 28762.50 at par 28762.50description:- supply of cable trays 2mm thickness size 100 x 50 mm gi, perforated (rmt) withcover complete and as per is, ie rules and site requirement.11a11 10.00numbers 180.54 1805.40 at par 1805.40description:- supply of combined switch socket box - 16 a, capton 5-in-1 combined switch andsocket with isi mark,as per is:3854 or latest12a122.00numbers34700.26 69400.52 at par 69400.52description:- supply of 4 pole mccb ,release range (80-200)a, breaking capacity 36 ka,microprocessor release with inbuilt earth pr

Porcelain Insulator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector