Latest precipitation tank Tenders | Government precipitation tank Tenders

Central Government/Public Sector

CTN :45708528

13 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of rectangular loft tank 500 liter liters rotational moulded polyethylene water storage tanks as per is :12701 (1996) brand: sintex neo or similar [ warranty period: 30 months after the date of delivery ] ]

CTN :45362727

11 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of rotational moulded polyethylene water storage tanks (v3) conforming to is 12701,rotational moulded polyethylene water storage tanks (v3) conforming to is 12701,rotational moulded polyethylene water storage tanks (v3) conforming to is 12701,hydraulically regulated door closers conforming to is 3564,bracket holder cp steel for curtain rod 20 mm,loft tank hdpe for kitchen 200 to 250 size 1000 x 700 x 330 mm ltr,pipe cp steel fancy for curtain rod 20 mm,door floor stopper aluminium 150 mm long with rubber buffer isi marked,door seal of metal strip min 0.5 thick 1 mtr length and 20 to 25 mm wide,door spring helical ms 150 mm,float valve 20 mm pvc complete set,float valve 25 mm pvc complete set,pipe aluminium anodised for curtain 18 or 19 mm,water closet indian type 500 by 550 by 580 mm complete with p trap,water closet indian type 500 by 550 by 580 mm complete with s trap

Central Government/Public Sector

CTN :45380393

22 Jun, 2026 NA

Multi City - Multi State

Tender For supply of supply of installation of automation of ammonia precipitation - plc cpu as per technical specification , supply of pc console for pc with chair technical specification specification , supply of ph measuring system for precipitation tanks , supply of flow control valve with pneumatic actuator proportional 25 mm , supply of capacitance type level transmitter , supply of flow meter for ammonia gas and air gas , supply of instrument control screen cable conductor of core 24 as per technical specification , supply of instrument control screen cable conductor of core 4 as per technical specification , supply of seam less pipes moc ss 304 of size 25 mm , supply of seam less pipes moc ss 304 of size 15 mm , supply, fabrication, erection and painting of structural steel as per scope of work , erection of equipments instruments etc and commissioning and handover

Central Government/Public Sector

CTN :45030365

29 May, 2026 NA

Cuddapah - Andhra Pradesh

Tender For supply of bonfigloli gear box spares on annual rate contract basis - model-1:model: as55 df p112, code: 1900000950717270002, batch:6/19, v1, i:33:2, application : i) neutralization tank agitator ii) precipitation tanks in chemical house iii) causticization tanks, casing with flange (part no. 2) for model-1, cover (part no. 3) for model-1, internal support (part no. 4) for model-1, gasket (part no. 5) for model-1, gasket (part no. 6) for model-1, extended 1st reduced pinion (part no. 7) for model-1, bored 1st reduced pinion (part no. 8) for model-1, gear wheel 1st reduction (part no. 9) for model-1, gear wheel 2nd reduction (part no. 10) for model-1, pinion 3rd reduction (part no. 11) for model-1, gear wheel (part no. 12) for model-1, cap (part no. 13) for model-1, bored input shaft (part no. 14) for model-1, oil seal (part no. 15) for model-1, oil seal (part no. 16) for model-1, gear head / box, in put assembly, out put assembly, bearing (part no. 20) for model-1, bearing (part no. 21) for model-1, bearing (part no. 22) for model-1, bearing (part no. 23) for model-1, bearing (part no. 24) for model-1, key (part no. 25) for model-1, key (part no. 26) for model-1, key (part no. 27) for model-1, key (part no. 28) for model-1, key (part no. 29) for model-1, level plug (part no. 30) for model-1, drain plug (part no. 31) for model-1, breather plug (part no. 32) for model-1, parallel pin (part no. 33) for model-1, parallel pin (part no. 34) for model-1, hex head screw (part no. 35) for model-1, hex head screw (part no. 36) for model-1, hex head screw (part no. 37) for model-1, circlip (part no. 38) for model-1, circlip (part no. 41) for model-1, circlip (part no. 42) for model-1, 2 nd reduction pinioin (part no. 45) for model-1, out put shaft (part no. 47) for model-1, spacer ring (part no. 48) for model-1, circlip (part no. 58) for model-1, circlip (part no. 39) for model-1, extended input shaft (part no. 50) for model-1, key (part no. 51) for model-1, input assembly, output assembly, model-2:as60 df p112, code: i 11799930001,batch:4/10, v1, i:37:1, application : feed tank agitator - ssr, casing with flange (part no. 2) for model-2, cover (part no. 3) for model-2, internal support (part no. 4) for model-2, gasket (part no. 5) for model-2, gasket (part no. 6) for model-2, extended 1st reduced pinion (part no. 7) for model-2, bored 1st reduced pinion (part no. 8) for model-2, gear wheel 1st reduction (part no. 9) for model-2, gear wheel 2nd reduction (part no. 10) for model-2, pinion 3rd reduction (part no. 11) for model-2, gear wheel (part no. 12) for model-2, cap (part no. 13) for model-2, bored input shaft (part no. 14) for model-2, oil seal (part no. 15) for model-2, oil seal (part no. 16) for model-2, gear head / box, in put assembly, out put assembly, bearing (part no. 20) for model-2, bearing (part no. 21) for model-2, bearing (part no. 22) for model-2, bearing (part no. 23) for model-2, bearing (part no. 24) for model-2, key (part no. 25) for model-2, key (part no. 26) for model-2, key (part no. 27) for model-2, key (part no. 28) for model-2, key (part no. 29) for model-2, level plug (part no. 30) for model-2, drain plug (part no. 31) for model-2, breather plug (part no. 32) for model-2, parallel pin (part no. 33) for model-2, parallel pin (part no. 34) for model-2, hex head screw (part no. 35) for model-2, hex head screw (part no. 36) for model-2, hex head screw (part no. 37) for model-2, circlip (part no. 38) for model-2, circlip (part no. 41) for model-2, circlip (part no. 42) for model-2, 2 nd reduction pinioin (part no. 45) for model-2, circlip (part no. 58) for model-2, circlip (part no. 39) for model-2, extended input shaft (part no. 50) for model-2, key (part no. 51) for model-2, spacer ring (part no. 46) for model-2, out put shaft (part no. 49) for model-2, circlip (part no. 57) for model-2, input assembly, output assembly, model-3:as60 df p132, code:i11800030001, batch:4/10, v1, i:33:4,application : i) filtrate tank

Central Government/Public Sector

CTN :45280579

12 Jun, 2026 NA

Vadodara - Gujarat

Tender For pratapnagar:- cleaning and disinfection of pvc tanks, terrace/loft water storage tanks, under ground sump and rcc overhead tank for 24 months. (every 04 months per tank i.e. 03 times in a year per tank) under the jurisdiction of sse(works) prtn.

CTN :44958707

04 May, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of foam ruber 40 den cushion 21in x22in x4in with tapesity sofa 5 seater with zip , spring rod for auditorum chair , back side fibre seat bracket for auditorium chair , head board for bed plywood as per sample , table top 3ft x2ft x18mm with sunmica top and bedding , side rail chair writing with proper holes for canning. , cane plastic 4mm thick white colour , wire mosquito 15 mesh x 26gauge x 1.20m widthx15m long aperture 150 microns , gauge woven wire mesh 28gx14mx3ftwide x 15 mtr long aperture 150 microns , wire mosquito proof 15 mes x 26gauge 0.90m width 15m long aperture 300 micron , loft tank 500 liter sintex , flush tank float valve pvc , pvc short bend for low level flush cistern 10 ltr , pvc tee 110mm , spindle for mixer , pvc socket 110mm , mixer leg , pvc socket 75mm , pvc bend 40mm , pvc tee 75mm , pvc socket 40mm , pvc bend 75mm , pvc bend of size 40mm , pvc bend of size 50 mm , ball valve set brass 40 mm , tee reducer 20x15 mm , socket reducer 20x15 mm , bend gi 15 mm , elbow gi 50 mm , tee reducer 40x15 mm , socket reducer 25x20 mm , hexagonal nipple 50mm double nipple , socket reducer 25x15 mm , barrel nipple gi 15mmx50mm , barrel nipple gi 15mmx200mm , barrel nipple gi 20x200mm , barrel nipple gi 15mmx25mm , sintex water storage tank isi marked 750 ltrs , barrel nipple gi 15x250mm , barrel nipple gi 20x300mm , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , tower bolts (non-ferrous metals) v2 as per is 204 (q2) ) /bid number : gem/2026/b/7401661 * /dated: 21-04-2026 & & / bid document 1 / 45

Central Government/Public Sector

CTN :44994868

18 May, 2026 NA

Vadodara - Gujarat

Tender For vadodara division:- utran-makarpura section - cleaning and disinfection of pvc tanks, terrace/loft water storage tanks, underground sump and rcc overhead tank for 24 months. (every 04 months per tank i. e. 03 times in a year per tank) under the jurisdiction of aden/n-bh and aden/s-bh.

Precipitation Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector