Get complete information related to latest Precision Machine Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Precision Machine Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Precision Machine Tenders.
Tender For supply and installation of minor instruments and general laboratory items for the department of pure and applied chemistry and university institute of pharmaceutical education and research under rusa 2.0 scheme - items/instruments/equipment, commercial ice cube making machine, digital analytical laboratory balance, digital circulatory heating water bath, digital magnetic stirrer with hotplate, digital ph meter, digital centrifuge machine, digital laboratory hot air oven, digital melting point apparatus, digital uv inspection cabinet, digital heating mantle-500 ml capacity, digital heating mantle-1000 ml capacity, digital heating mantle-2000 ml capacity, digital advanced heating mantle with stirrer-500ml capacity, digital advanced heating mantle with stirrer-1000ml capacity, digital advanced heating mantle with stirrer-2000ml capacity, refrigerator
Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precisionmachined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control
Tender For :purchase of chemistry laboratory equipment for basic engineering department - purchase of chemistry laboratory equipment for basic engineering department, hot plate: top plate material: cast iron ; plate size: minimum 8 inch diameter;power rating: 2000 w ; temperature range: ambient to 200 c minimumthermostatic temperature control: required; power supply: 220 240 v ac, 50 hz, ic regulated battery eliminator: ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., ammeter: dc (0 - 2 amp), voltmeter: dc voltmeter; range 10 v, analog, galvanometer: moving coil type, 30-0-30 scale, unbranded with bhel ; specification-sensitivity 0.143mm/v, water distillation unit: output capacity: 4 litres per hour (lph); ph value: 5.5 to 7.0 ; conductivity (raw water distillation):3.0 4.0 s/cm or less ; glassware material: borosilicate 3.3 glass (pyrex/duran equivalent); heating elements: silica-enclosed quartz heaters or chromium-plated element variants; power supply: 220 240 v ac,50 hz / 60 hz, single phase; automatic water level cut -off, electro analytical balance: load capacity: minimum 500 g; readability: 0.01 g; linearity: 0.02g; display: lcd/led; tare function: required; top pan type; power supply: 220 240 v; ac, 50 hz, electric bunsen burner: electrically operated, energy regulator/ control knob operating temperature 800 c ; body: stainless steel, power supply source: corded, electrically operated; energy regulator/ control knob, operating temperature 800 c ; body: stainless steel, power supply source: corded electric, supplied with a heavy-duty, heat-resistant, electric, supplied with a heavy-duty, heat -resistant, digital balance: weight 500g, accuracy 0.01g, top pan. tare function, caliberation- automatic external display type: led
Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precisionmachined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr
Tender For corrigendum : supply of digital single pan electronic analytical balance with windshield, specification as per annexure a. make: pasco/citizen or similar [ warranty period: 30 months after the date of delivery ] ]