Latest pressure tube Tenders | Government pressure tube Tenders

State Government

CTN :45489168

29 Jun, 2026 3.00 Crore

Kota - Rajasthan

Tender For parallel annual rate contract for the work of drilling of 125 mm dia tube well, for hand pumps and installation of hand pumps complete with assembly and construction of platform complete job in various villages/ towns of under district circle kota

State Government

CTN :45496019

29 Jun, 2026 3.00 Crore

Kota - Rajasthan

Tender For parallel annual rate contract for the work of drilling of 125 mm dia tube well, for hand pumps as per departmental specification and installation of hand pumps complete with assembly and construction of platform under district circle kota

State Government

CTN :45506875

29 Jun, 2026 1.25 Crore

Baran - Rajasthan

Tender For annual rate contract for the work of drilling of 125 mm dia tube well for hand pumps as per departmental specification and installation of hand pumps complete with assembly and construction of platform as per specification and drawings

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

State Government

CTN :45496792

12 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For procurement of various spares for air-preheater of unit 5 (500 mw) boiler at bhusawal tps - blr regah 0 0 pin rack segment assy, blr regah 0 0 axial seal plate assy , overunning clutch imported model so 500n, aluminium seal ring, reg aph air seal assly for modified guid, blr regah 0 0 by pass seal bar assy, regenerative aph bypass seal angle, support brg runner plate, hot end stationary spool assy, adapter sleeve with check nut for pa , blr regah 0 0 seal tube, spool seal assembly ring

Central Government/Public Sector

CTN :45499723

01 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of 1 insert , 2 upper stopper , 3 nut , 4 nut , 5 forked adopter , 6 washer , 7 tube , 8 lever , 9 fork , 10 fork , 11 cover , 12 adjustable end tip , 13 nut , 14 end tip , 15 adjustable lugged terminal , 16 end piece with lug , 17 eye end tip , 18 double lug adjustable tip , 19 frok-shap terminal , 20 adjustable tip , 21 lug , 22 catch , 23 support , 24 adapter , 25 elbow , 26 elbow , 27 elbow , 28 angle plate with flange , 29 angle , 30 flange angle plate , 31 elbow , 32 flange angle , 33 t-piece with connecting flange , 34 t-piece , 35 tee-piece , 36 tee- piece , 37 flanged angle plate , 38 flanged t-piece , 39 adapter t-piece , 40 flanged t-piece , 41 flanged t- piece , 42 axis , 43 bush , 44 bush , 45 bush , 46 bush , 47 flanged elbow , 48 flanged t-piece , 49 t-piece with flange , 50 lever , 51 fork-shape terminal , 52 collector , 53 nut , 54 body , 55 flange , 56 flanged angle plate , 57 flange , 58 end tip , 59 seat , 60 turn buckle , 61 plate , 62 bush , 63 body , 64 t-piece , 65 flange , 66 elbow , 67 angle , 68 flange , 69 flange , 70 flange , 71 body , 72 tee-piece , 73 elbow , 74 pipe connection , 75 angle , 76 body , 77 tee piece , 78 t- piece , 79 elbow , 80 eye end , 81 lug , 82 fork , 83 lug , 84 eye end , 85 bush throttle assly , 86 bush throttle assly , 87 bush throttle assembly , 88 screw , 89 elbow , 90 pipe connection , 91 handle , 92 pipe connection , 93 valve , 94 limiter of consumption , 95 nut , 96 ring , 97 ring , 98 ring , 99 bush , 100 flange , 101 flange , 102 pipe connection , 103 pipe connection , 104 pipe connection , 105 elbow , 106 fork , 107 end piece , 108 end piece , 109 nut , 110 nut , 111 ring , 112 ring , 113 flange , 114 body , 115 body , 116 body , 117 body , 118 body , 119 body , 120 sleeve , 121 sleeve , 122 sleeve , 123 sleeve , 124 sleeve , 125 sleeve , 126 sleeve , 127 ring , 128 nut , 129 nut , 130 nut , 131 nut , 132 flange , 133 flange , 134 flange , 135 nut , 136 nut , 137 nut , 138 nut , 139 nut , 140 nut , 141 nut , 142 nut , 143 end pipe , 144 body , 145 body , 146 plug , 147 plug , 148 plug , 149 plug , 150 pipe connection , 151 nut , 152 pipe connection , 153 pipe connection , 154 pipe connection , 155 pipe connection , 156 pipe connection , 157 cap , 158 frame of cap , 159 bush , 160 flange , 161 adapter , 162 cross piece , 163 cross piece , 164 tee-piece , 165 angle , 166 elbow , 167 pipe connection , 168 flanged elbow , 169 tee- piece , 170 flanged t-piece , 171 adapter t-piece , 172 tee-piece , 173 cross piece , 174 screw in adapter , 175 locator clamp , 176 flange , 177 end piece , 178 elbow , 179 end tip , 180 flange , 181 roller

CTN :45176246

12 Jun, 2026 NA

Hyderabad - Telangana

Tender For bid to ras supply of teensy 4.1 micb3 c40 , mems microphones sph0655lm4h- 1 , raspberry pi 5 8 gb ram , lora sx 1276 and 1278 module , nuts, bolts and l angle different varieties , connecting wires and cables varieties , gps modules with pps output , power bank 10000ma 5v dc , enclosures for teensy, lora, microphone assemblies , micro sd cards 32 gb, class 10 , regulated power supply 12v dc to dc , tripods for sensor nodes , cable and connectors , nema 17 59 n-cm stepper motors bipolar , tmc2208 stepper motor drivers , mini protoboard with screw terminals , 100 uf capacitor 35v , 22 awg wire , 5v regulator , 8.4 inch 4 wire resistive touch panel , 30 v bench power supply , 1 inch steel bearing ball , 22 mm long m3 tie rod , m3 x 6 mm threaded inserts , m3 x 5 mm standoffs , m3 x 5 mm screws , m3 x 8 mm screws , m3 x 10 mm screws , m3 x 35 mm screws , m3 nylon locknuts , m4 x 20 mm screws , m4 x 25 mm screws , m4 nylon locknuts , pla filament , exacto knife , hot glue gun , primary dual payload release actuator , retrofitting carbon fiber cf structural tube , aerodynamic dummy bomblet , electronic trigger interface and wiring harnes , mounting bracket and fastener kit , primary dropping mechanism unit , retrofitting assembly straps , aerodynamic bomblet , 550 mah li hv battery pack , dual channel li hv charger , primary mmhg payload release actuator , retrofitting base plate assembly , dummy mmhg practice bomblet , electronic trigger interface , mounting hardware and vibration dampeners ) /bid number : gem/2026/b/7476437 * /dated: 13-05-2026 & & / bid document 1 / 39

CTN :45484199

19 Jun, 2026 NA

Tinsukia - Assam

Tender For supply of fuel filter set primary and secondary , oil filter , hydraulic filter , air filter set outer and inner , ignition key switch , centre joint seal kit , oil filter hydraulic , filter suction assy , strainer , element filter , grease nipple , fuel filter element , fuel water separator , engine oil filter , bucket teeth , bucket teeth locking pin , lock washer , charging nipple , front movable window assy , glass lower , sprocket , bucket distance piece , fuel pipe line 19mm , fuel feed pump , fuel tank strainer , battery 12v, 70ah , vibrator hydraulic hose , bucket locking pin , tooth , pin , retainer , filter element oil eg , filter element fuel eg , filter element hd air breather , air con filter outer , air con filter inner , element filter outer , element filter inner , fuel element , door upper glass , rock breaker hyd pipe bracket , tooth tip , pin locking , washer , oil filter element hydraulic , element servo filter , element return filter , fuel filter , glass right side , assembly front screen front glass , front wheel tube , tooth bucket , bolt plough 3 oblique 4 inch unf x 70mm , nut 3 oblique 4 inch , king post seal kit , air filter , stainer suction , filter return , element oil filter , air filter element , filter sedimentor , filter element , thermostate element , filter oil , stablizer base seal , drill bit 6 feet , drill bit 8 feet , drill bit 10 feet , right side joy stick complete assy , locking pin , ignition key set , air filter inner , air filter outer , fuel filter primary , fuel filter secondry , break cylinder kit , parking break cable , anabond big 85grms , m seal 90grms , thread tape 8mx12mm , terminal battery , bty lid , grease nipple all size , insulation tape 20mtrs , benjo washer 17mm copper , benjo washer 19mm copper * /bid number : gem/2026/b/7639174 + /dated: 09-06-2026 ' ' / bid document 1 / 60

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45488935

30 Jun, 2026 41.38 Lacs

Murshidabad - West Bengal

Tender For procurement of esp spares for unit 4 esp overhauling during under ahp-em,stage ii during 2026,sgtpp - procurement of esp spares for unit 4 esp overhauling during under ahp em ,stage ii during 2026,sgtpp, ci bearing,collecting rapping ( plain bearing (ci) for crm & erm system,mat-is-210 gr-20 with 02 nos bolt, id-51 mm and 50 mm thickness. ), ci bearing for erm vertical shaft for esp dia-40mm. ( bush along with outer assembly. ), set ring for bush bearing for esp for 500mw esp, thrust bearing of em vertical rapping shaft ( mat-en-8. ), bottom bearing # of em rapping vertical shaft, major pin wheel big ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), minor pin wheel small ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), heating element for esp hopper for esp for 500mw esp. ( 440vac,for 500mw bhel esp, rating-500w. ), heating element for shaft insulator for esp for 500mw esp. ( for 500mw bhel esp, rating -1.0kw,type- breathing type tubular, 415v. ), heating element for support insulator for esp for 500mw esp., shaft insulator for esp for esp for 500mw esp. ( suitable for 500mw esp,make-m/s. bhel. ), support insulator, type-cylindrical for esp for 500mw esp ( od: 435 + 10 mm; id: 379 + 10 mm; height: 375 + 5 mm,for 500 mw bhel make esp. ), anvil for shock bar assembly #, inner arm for rapping hammer for esp moc-en 8 ( inner arm(ms) for rapping hammer suitable for m/s. bhel make esp ,2x500mw. ), emitting electrode for 500mw esp for esp model faa-9x45m-2x100150-2, hammer assembly,em rapping system # ( outer arm/hammer for eerm of 500 mw bhel make esp ), hammer assembly,col rapping system # ( outer arm/hammer for cerm of 500 mw bhel make esp ), pin insulator for disconnecting switch for esp c.no-71-999, crm horizontal shaft, dia-50mm for esp shaft 1-3 length -4250mmrnshaft 2-3 length -4650mmrnshaft 3-3 length -4790mm ( moc- en8, 400 mm pitch, as per drg. no: 2-79-725-04299 of 500mw bhel unit. section: 02,03 & 04. sleeve tube to be given seperate 04 nos. per set. ), shaft,end,d50xl940mm,en8 w/key&key slot for esp cerm shaft as per bhel drg no: 2-79-725-04299 ( moc: en8 ), shaft,eerm shaft,vertical,dia-40mm for esp 9900mm long,with sleeve,moc-en8 or080m40-bs970 or equivalent ( for 500 mw bhel make esp ), shaft,eerm shaft,horizontal,dia-50mm for esp 9270mm long,with sleeve and set rings,moc-en8 or080m40-bs970 or equivalent ( 03 parts(part-i with key,part-ii & part-iii) with 02 number set ring,02 number sleeve.bhel drawing no.-2-79-716-03812. ), gdrm d-50 shaft moc-en-8 with 19 holes for 500 mw esp serial no-faa-9x45m-2x100150-2 , 3 parts shaft with 19 holes.shaft with sleeve and set rings., big hammer for cerm shaft for 500 mw esp serial no-faa-9x45m-2x100150-2 drg no:2-79-725-04299

Pressure Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector