Latest pressure tube Tenders | Government pressure tube Tenders

Central Government/Public Sector

CTN :45576507

15 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of split grommet for high pressure tube (cylinder head) to drg no. goc/d/sk-4-14983 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45733138

08 Jul, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap junk kachra cut pieces of ms and gi sheet plate, pipes, filter, angle, flat, strip, rod, round, wire, coach cut parts, p.way items, tin, drums, gate lamp, cooler body, protective tube, oil filter, fan case, carriage fan jali, dust shield spring, ladder, fire extinguisher, bucket and other similar items of junk rusty, dusty with or without negligible non-ferrous attachment if any. [ bin38-39)

Central Government/Public Sector

CTN :45733148

08 Jul, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap junk kachra cut pieces of ms and gi sheet plate, pipes, filter, angle, flat, strip, rod, round, wire, coach cut parts, p.way items, tin, drums, gate lamp, cooler body, protective tube, oil filter, fan case, carriage fan jali, dust shield spring, ladder, fire extinguisher, bucket and other similar items of junk rusty, dusty with or without negligible non-ferrous attachment if any. [ bin 17&opp bin 17)

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

CTN :45586912

02 Jul, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of adhesive plaster zo seven point five coma five meter , mupirocin two percentage oint tube of five gram , triamcinalone acetate one percentage for oral use coma tube of five gram , denture cleansing tablets , wax model cement box of ten sticks coma sticky wax , dexamethasone sodium phosphate four point four mg two ml injection , post extraction dressing containing iodoform fifteen point eight gram jar of twelve gram , prophylaxis paste jar of three forty gram , outfit matrix retainer ss complete with one packet of ss bands , outfit matrix ss siqveland bands narrow for packet of twelve , strip ash melinex polyster film zero point nine five by ten centimeter box of hundred , chlorohexidine mouthwash zero point two percentage bott of one fifty millilitre , articulating paper , plaster of paris special dental , mettal cutting bur for airotor , sticks tracing red or green , anticarious fluoride rinse mouthwash with sodium fluoride acidulated phosphate bott of four fifty ml , tube suction , spray anaethetic surface , bur surgical oral round tungsten carbide for straight hand piece , bur surgical oral tapered fissure tungsten carbide for straight hand piece , povidone iodine solution five percentage bottle of hundred ml , raneys hemostatic clips , latex elastic blue one by four packet of thousand , latex elastic yellow five by sixteen packet of thousand , protective goggles , bone wax , lubricant spray bottle of three hundred , calcium hydroxide with iodoform , inj tramadol hydrochloride , inj diclofenac sodium seventy five mg in three ml , composite polishing and finishing rainbow technic kit assorted with strips discs and burs in large medium fine and super forms , base former set of three , resin reinforced super hard type iv dental plaster pkt of 03 kg , dental floss with handle , interdental brush

Central Government / Public Sector

CTN :45710503

06 Jul, 2026 NA

Multi City - Odisha

Tender For auction sale of depot ferrous scrap - mms/jun-26/01: scrap protective tube and lower spring seat etc as available in the lot.bidders are requested to visit the materials before bidding.

Central Government And Public Sector

CTN :45701898

20 Jul, 2026 5.60 Crore

Kalpakkam - Tamil Nadu

Tender For construction of rc vaults for storage of pressure tube and end fittings and garter spring for maps unit-2 emccr at cwmf facility, kalpakkam.

Central Government And Public Sector

CTN :45712871

20 Jul, 2026 NA

Narora - Uttar Pradesh

Tender For supply of bearing turbocharger end , oil seal ost arm dlw , clamp coupling , door assembly engine base , elbow water cyl , nut high pressure tube stud , element lub oil filter , element primary fuel filter , element secondary fuel filter , stud cam shaft dlw , nut cam shaft dlw

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45697878

06 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of tarpaulin assy , rope , jump start cable , carpenter saw , medicine box , protective packing for documents , fire extinguisher pg 2l , canister 5l , air tube with adaptor , protective bag , shovel , flag falg assy , car lock jaso 600 30 navatal lock 40mm 5 levers with keys , warning triangle warning triabgle , inspection lamp hand lamp inspection lamp , socket upper upper drawer assy 614 336 182 000 , socket lower lower drawer 614 336 183 000 , washer , screw for head and cylinder , rocker bush , springs washer , nut m14x1 5 nut m14x 1 5 , adjusting screw adjusting screw , valve lifter , plug

Pressure Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government And Public Sector