Latest pri card Tenders | Government pri card Tenders

Central Government/Public Sector

CTN :45703485

17 Jul, 2026 NA

Bangalore - Karnataka

Tender For pc6814-printedocard, iss-2, 12-layer, 1.6 mm thickness , pc6809-printed card, iss-4, 8-layer, 1.6 mm thickness

CTN :45696133

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electronics and communication engineering department - supply of equipment for electronics and cmmunication engineering department, 8051 micro controller kit :specification : operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., temperaturemeasurementkitspecification : sensors:rtd (pt-100), thermocouple (fe-k/j-type), and/orthermistor (ntc). display: 3 digit led/lcd digital display(typically 200 mv fsd). temperature source: portable water kettle orheater block. signal conditioning: on-board circuitry foramplification, linearization, and cold junctioncompensation. test points: multiple 2 mm / 4 mm banana socketsfor monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntcthermistor probe, k-type thermocouple probe,patch cords and user manual., ask modulationanddemodulation kit:specification : message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz,amplitude 5 v. modulator type: switching modulator using analogswitch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kit:specification :power supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshootingexperiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise blockdiagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection withdoordarshanfree channels. free-to-air channel demonstration., fpga trainer kit:specification : must use industry-standard mid-range fpgadevice usb-jtag programmable, compatible withvivado ise (webpack). power supply: 5 v dc through usb or externaladapter. on-board peripherals: leds, switches, pushbuttons, 7-segment display,clock source, gpio /pmod expansion ports, uart, vga / hdmi, usbuartbridge, usb cable. user manual.

CTN :45697949

16 Jul, 2026 14.54 Lacs

Rupnagar - Punjab

Tender For tender for supply of procurement of public health/ carpentry items at iiser mohali - description of hema, desk 1/2" with cap, disk 3/4" with cap, ss pvc connection 18", ss pvc connection 60, ss multi jet spray for wc, single cyphone, cyphone with double bumon, single flow over head shower (square) (with, ss-health faucet continental complete set abs material with 1meter ss pipe, bottle trap for both wash basin & sink, flexible pvc waste pipe (1-36, hydrandic seat cover, wall hung toilet seats (with compset seaty cover, water tank ceramic brass screw 44 pcsshort bend ball cocksyphon ss rack bolt), sink waste coupling 4 11/4" (big), cp waste coupling 1 1/4" brass for urinal sink with full thread (small), angle ms cutting blade for hand grinder, screw driver 9 (2-in-1), screw driver 6 (2-in-1), 250man water pump pliers, rust resistant chrome (parrot player), pipe wrench 14", hexa blade (single side. ss.cutting), ball valve 3-4" (20), ball valve 1" (25mm)-, nozzle bib çock 1/2" (15mm)-small body half tum, bib cock 1/2" (15mm)-long body-half tum, angle valve 1/2" (15) hall turn, fillar cock marr for kruchen sink with pipe, pillar cock mixer for wash hasin, bend mixture, 3/4"x12" cp benl, nozzle hih cook (2-in-1), extension nipple cp 1/2" 11/2, extension nipple cp 12 x2, cil plug 1/2" (threaded, water meter 40mm (1 1/2") (flange type), water meter sum (2) (thmal type), cpvc union 1", cfvc unice 2, cpvc mta ix, cpvc mta 11/2", cpvc mta 2, cpvc fta 1/2", cpvc fta, cpvc fta 11/2, cpvc fta 2, cpvc else "s", cpvc 112 x 1 1/2, cpvc, cpvc els, cpvc 6" 16", cpvc clbo 34", cpvc socat 3/4", cpvc 4", cpvc bush 1434", cpvc bush 14, cpvc hall valve 1 1/2", cpvc hall valve 2", cpvc pipe 14", cpvc pipe 2, cpvc mta b 1 / (2') * 3/4", cpvc mta brass 27, cpvc cho fta 4 1/2"-, cpvc cho fta 34 3/4"-basss, pvc elbo bend 2", pvc elho hend 4", pvc elho hend 6", pvc tee 4, tpvc tee, pvc flash handie, pvc hall cock of long md with pvc hall

CTN :45657084

03 Jul, 2026 NA

Uttara Kannada - Karnataka

Tender For providing of custom bid for services - repair and overhauling of 02 no audio pcb and 01 in no priority card

Central Government And Public Sector

CTN :45638262

26 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of brass sieve set of size astm 30. 40, 50, 70, 100, 140, 200, 270 & pan with lid (lid should be with ring and not head)., for sand sieve analysis. the sieves should be of brass frame, of 200 mm diameter and 50 mm height., should meet the requirement of is- 410 part 1. the calibration certificate for size conformity to be obtained from a nabl approved laboratory with scope for the same. sieves should be of minimum 0.6 mm thickness gauge, and a minimum weight of 320 gms each. brass sieves should be without any joint machine made, uniformly fabricated with ss cloth, individually packed in printed cardboard boxes . warranty-1 year. the whole sieve set will be rejected even if a single sieve is not meeting the above requirement. if any sieve is damaged within warranty period, the supplier has to replace the same, on no payment basis. [ warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45638263

26 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of brass sieve set of size astm 8, 10, 12, 14, 16, pan with lid (lid should be with ring and not head)., for steel shots sieve analysis. the sieves should be of brass frame, of 200 mm diameter and 50 mmheight., should meet the requirement of is- 410 part 1. the calibration certificate for size conformity to be obtained from a nabl approved laboratory with scope for the same. sieves should be of minimum 0.6 mmthickness gauge, and a minimum weight of 320 gms each. brass sieves should be without any joint machine made, uniformly fabricated with ss cloth, individually packed in printed cardboard boxes. warranty-1 year. the whole sieve set will be rejected even if a single sieve is not meeting the above requirement. if any sieve is damaged within warranty period, the supplier has to replace the same, on no payment basis. [ warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45638264

26 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of brass sieve set of size 10 mm, 6.3 mm or 5.0 mm, 5.6 mm, 4.75 mm, 4 mm, 1 mm, 0.5 mm& 0.106 mm, for sieve analysis of miscellaneous consumables like hddrm, dolomite, graphite powder etc. . the sieves should be of brass frame, of 200 mm diameter and 50 mm height., should meet the requirement of is- 410 part 1. the calibration certificate for size conformity to be obtained from a nabl approved laboratory with scope for the same. sieves should be of minimum 0.6 mm thickness gauge, and a minimum weight of 320 gms each. brass sieves should be without any joint machine made, uniformly fabricated with ss cloth, individually packed in printed cardboard boxes. warranty-1 year. the whole sieve set will be rejected even if a single sieve is not meeting the above requirement. if any sieve is damaged within warranty period, the supplier has to replace the same, on no payment basis. [ warranty period: 12 months after the date of delivery ] ]

Co-operative

CTN :45635197

20 Jul, 2026 19.93 Lacs

Bengaluru - Karnataka

Tender For supply of different types of electrical items to bengaluru dairy. - exhaust fan almonard 18 inches 1400 rpm 1 phase, exhaust fan almonard heavy duty 500watt 900rpm air delivery 9400 cu mtr/hr sweep 600mm 3 phase, alstom industrial fan sweep 380 mm cat no gpn38041 single phase 230 volts watt 180 w rpm 1400, bajaj grace dlx 3 blade ceiling fan type ceiling fan, model grace dix, voltage 230volts, colour brown, number of blade 3 , material aluminium, speed settings4, high air throw height adjustable pedestal fan 18 inches green rpm1440, 100watt, extra heavy duty industrial wall fan/wall air circulator fan, dia600mm, single phase, 50hz, 230volts, rpm1440, heavy duty wall mounting fan 400 sweep, 230volts, single phase, high flo, pest-o-flash tube tl-d15w, pest o flash device voltage 220-240volts ac,frequency 50hz model pof-t2,number of tubes 2,lamp 15watt x 2 nos philips. mounting ceiling chain provided, weight 6.4kg (approx), led street light fitting cat ref lstp-90-cdl supply voltage 240v, 50hz, system wattage 90w,90watt, led flood light ip65 (gleam,50w) rated voltage 230v, 50hz rated wattage 50w, led high bay light, type ref byp225p 80 system power 80w, input 240v-50hz, led straight linear tubelight batten(cool white) complete set 30 watts 4 feet, led spare tubes 20 watts 4 feet, led straight linear tubelight batten(cool white) complete set 20 watts 4 feet, spreader link kit cat no cs94274, side add on fitment for moc3 to mo c30 cat no cs96339 (nc), side add on fitment for moc3 to mo c30 cat no cs96322 (no), cassing capping patti 1.5 inch, cassing capping patti 1 inch, cassing capping patti 3/4 inch, power capacitor 50kvar, 3phase 440volts,50hz box type model ltbcd 50kvar, power capacitor 25kvar 3phase 440volts 50hz box type model ltbcd 25kvar, philips led electronic driver model x100c070v143fny1co, modular hi-fi socket type fan regulator (rotary), modular hi-fi socket type fan regulator (step), switch type fan regulator, six amps 3 pin socket, fifteen amps 3 pin top, modular switch 6 amps, six amps 3 pin top, switch single pole-6 amps, electrical grade rubber mat black colour, size1mtr x 2mtr x 2.5mm thickness, rubber mat as per isi5652 for 11kv with standing test reports from cpri shall be givers along with the supply, rotary switch 3 pole on/off ref s63-61199 63 amps, rotary switch 3 pole on/off ref s32-61197-803 32 amps-tdyr, contactor ac3 9 amps 415 v 230v coil, contactor lcid253w ac 3 25 amps/9kw 415v, contactor lcid173w ac3 16 amps/9kw 415 v, thermal overload relay 9-14 amps make tc robusta, thermal overload relay 4-6 amps make tc robusta, thermal overload relay 10-13 amps make tc robusta, thermal overload relay 7-10 amps make tc robusta., contactor 3tf47 00-0a, 230v coil, contactor 3tf46 00-0a, 230v coil, contactor 3tf34 00-0a, 230v coil, contactor 3tf33 00-0a, 230v coil, contactor 3tf31 00-0a, 230v coil, mpcb mog-h-2500, contactor mn16, 415volts, 16amps, bimetel relay with single phase protection for contact mounting range 8 to 12.5 amps, bimetel relay with single phase protection for contact mounting range 5 to 8 amps, bimetel relay with single phase protection for contact mounting range 2.5 to 4 amps, bimetel relay with single phase protection for contact mounting range 1.6 to 2.5 amps, capacitor duty contactor moc50, contactor moc25, contactor mnx18, phase failure relay 240v ac model vsp d1, under/over voltage relay (three phase four wire) 415v ac model vcf d2, phase failure relay with variable under and over voltage cutout 440v ac model alv d2, auxiliary contact block for 3tf3/3th3 contactor 1no(with blue slider) cat no 3tx4 010-2a, auxiliary contact block for 3tf33/th3 contactor 1ncwith green slider cat no 3tx4 0012a, star delta timer 3rp15761np308k settings time range 3-60secs, rated voltage a1-a2 200-240v,50hz a3-a2-24v ac/dc, switchgears-dol motor starter cat no ss96210 type10mm, switchgears-switch fuse unit 125 amps, switchgears-4 pole 63 amps mcb, switchgears-4 pole 32 amps mcb, switchgears-4 pole 25 amps mcb,

CTN :45617260

29 Jun, 2026 NA

Raigad - Maharashtra

Tender For supply of center punch 6 inch,cotton line dori,slate pencil,chalk,staff safety shoes,staff helmet,divider 12 inch,yellow paint 100ml can,writing brush,painting brush 2 inch,painting brush 4 inch,sprit lavel 12 inch,gas cutting tourch,o2 regulator,lpg regulator,argon regulator,screw spanner 12 inch,nozzle cleaner,leather hand gloves,8 mm rubber hose red colour,8 mm rubber hose blue colour,flash back arrestor tourch side for o2,flash back arrestor regulator side for o2,flash back arrestor tourch side for lpg,flash back arrestor regulator side for lpg,hose clamp,hose nipple,cylinder key,screw driver 8 inch,safety goggless,spark lighter,3 mm thk cutting wheel ag 5,3 mm thk cutting wheel ag 7,6 mm thk grainding wheel ag 5,6 mm thk grainding wheel ag 7,leg guard,hand sleeve,full face shield,cotton hand gloves,95 sq mm aluminium welding cable,95 sq mm aluminium cable lugs,50 sq mm copper cable,50 sq mm cable lugs,25 sq mm aluminium cable lugs,16 sq mm aluminium cable lugs,12 sq mm aluminium cable lugs,8 sq mm aluminium cable

CTN :45597060

29 Jun, 2026 NA

Nasirabad - Rajasthan

Tender For supply of registers fs size 100 pages 70 gsm double side printing , registers a4 size 100 pages 70 gsm double side printing , registers a4 size 200 pages 70 gsm double side printing perforated , registers 10 inch 15 inch close 100 pages 70 gsm double side printing , registers 15 inch 20 inch close 100 pages 70 gsm double side printing , printed cards a4 size b and w double side printed , printed cards a4 size colour double side printed and laminated , booklet printing 50 pages a5 size colour double side printed , supply of printed envelopes small , supply of printed envelope a4 , supply of printed envelope a3 , supply of printer letterhead , vinyl sticker printing and application , sup and erection of acp vinyl sign boards , sup and erection of acrylic 2mm vinyl boards , banner printing , sup of miscellaneous sign boards , galvanum sheet thickness 26 guage , box file laminated lever arch , office file spring a4 * /bid number : gem/2026/b/7676622 + /dated: 17-06-2026 ' ' / bid document 1 / 20

Pri Card Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

Co-operative