Latest propeller scrap Tenders | Government propeller scrap Tenders

Central Government/Public Sector

CTN :40561520

16 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of contactor with diode for ventilation fan unit current rating 16 amp, voltage rating 690 v ac, main pole 3 no. aux contact 1 nc control voltage 77-143 v dc with surge sup pressor as per bom letter no. el/7.1.108/mssbc dt.- 17-09-2021 make- abb (tal16-30-10+rv5/250) , schneider (lc1d18fd), siemens (3rt20181bf42+3rt29161jl00), l&t (mdx25) only. [ warranty peri od: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40539937

09 Jun, 2025 NA

Karimnagar - Telangana

Tender For supply of ventilation system for chp for ntpc telangana project - centrifugal fan sisw type of capacity 41600 cmh, motor 11kw 4p , exhaust air gravity louvers of size 500 x 400, to be fixed on mcc room wall, material of construction and painting details shall be as shown in typical drawing annexure 9 , pre fabricated gi supply air duct of size, segments, transition pieces, duct support fixtures like angle supports, anchor bolts, ms rods, gasket, corner, cleat etc. as applicable , double louvered double deflection type grill with volume damper of size 600 x 300 to be fixed in supply air duct , fusible link type fire dampers to be fixed in supply air duct, size 1200 x 900 including all electrical and c and i items as per mechanical requirement. , tube axial exhaust air fans with rain protection cowl with bird mesh and fixing support arrangement as shown in typical drawing of 19000 cmh capacity , tube axial fans with rain protection cowl with bird mesh and fixing arrangement as shown in typical drawing each of 2540 cmh capacity , propeller air fan with rain protection cowl with bird mesh and fixing arrangement as shown in typical drawing of 2210 cmh capacity , no. of man-days , no. of man-visits

Central Government/Public Sector

CTN :40511913

27 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of mpcb (motor protection circuit breaker), current rating: 3-4a, thermal release range: 2.5-4 a, class:10, breaking capacity: 50ka, pole: 3p, voltage: 415v ac, 1no+1nc auxiliary contact block. as per sr no. 74 of bill of material (bom) of rdso specification no. rdso/pe/spec/ac/0184-2015(rev.0) & conforming to rdso spec no rdso/pe/spec/ac/0184 -2015 (re v. 0) suitable for use in ventilation fan unit. rdso approved make only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40531096

05 Jun, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of impeller wheel suitable for modified ventilation fan of high capacity power car with ms drive hub coupled with drive motor air volume rating 20000cmh speed dynamically balanced as per iso standard. paint syntheticenamel light grey (without motor ) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40511621

24 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of ventilation fan assembly for 1600 hp demu/dpc confirming to rdso spec. no. mp.0.08.00. 102, rev-02 or latest [ warranty period: 30 months after the date of delivery ]

CTN :40470850

03 Jun, 2025 3.58 Lacs

Burdwan - West Bengal

Tender For complete repairing and rewinding of 150 hp cg make 550v, 1485rpm ventilation fan motor and repairing and overhauling of 200a, 550v abc make acb switch gear of madhaipur colliery under pandaveswar area

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

CTN :40474980

03 Jun, 2025 3.58 Lacs

Multi City - Multi State

Tender For complete repairing & rewinding of 150 hp cg make 550v, 1485rpm ventilation fan motor and repairing & overhauling of 200a, 550v abc make acb switch gear of madhaipur colliery under pandaveswar area.

Central Government/Public Sector

CTN :40350688

30 May, 2025 2.05 Lacs

Korba - Chhattisgarh

Tender For corrigendum : repairing of 06 nos l.t. motors for ventilation fan, belt and pumping operations at 4/5 mine of rajgamar sub area of korba area.

Central Government/Public Sector

CTN :40475466

09 Jun, 2025 NA

Latehar - Jharkhand

Tender For supply of ventilation fan motor suitable for 1600 hp demu power car. spec: vertical mounting sm pl model er225/125-5.5 motor rating 5.5kw, current 11.2 amps, voltage -415 vac,50 hz fan speed[1 ]

Propeller Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors