Latest pump bracket Tenders | Government pump bracket Tenders

Central Government/Public Sector

CTN :45012177

21 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of vent fan pump bracket plate as per drawing no. 4cb/dmu/dpc/400. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45012922

04 May, 2026 NA

Dahod - Gujarat

Tender For supply of standby oil injector complete with pump bracket (right hand side) & feeder bottle, part no. se/soi/rhs/130. for automated hydraulic bearing extractor machine 130 mm dia., make/brand: siloman or similar [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45028407

04 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For auction sale of condemned rubber dust,condemned led tv and condemned tape recorder etc,condemned iron scrap (gi, angle, pipe),condemned brake drum leyland (iron), fire cylender and water pump (iron) etc,condemned nitrozen machine (iron),condemned clutch plate and pressure plate car,condemned presure jack (iron) - capacity 10 ton,condemned iron dust/part and condemned bearing(iron),condemned motor parts (chasis braket, chasis angel, break booster, shaft etc),condemned rubber scrap (air filter, diesel pipe, oring, oil filter etc),condemned coach fan

Central Government/Public Sector

CTN :44801232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply, installation, testing and commissioning of hydraulic oil injector pump complete suitable to build up hydraulic pressure up to 4000 bar. each set consisting of following items: (1) oil injection pump pressure capacity 4000kg/sq.cm (2) pump bracket and special floor stand (3) feeder bottle and handle (4) high pressure tubing capacity 4000bar length 3 meter (5) adopter nipples (6) pressure gauge(0-4000bar) (7) carry case. make precision, gm, bega, fag or skf [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :44972439

24 Apr, 2026 NA

Daman - Gujarat

Tender For auction sale of empty drums-plastic 1000 ltrs-gi,empty drum plastic 1000 ltrs 2nd,empty drums-plastic 750 ltrs-gi,empty drums-plastic 200 ltrs,empty drums-plastic 150 ltrs,empty drums-plastic 50 ltrs,empty drum ms-200 ltrs,plastic carbo scrap-25 liters,plastic carbo scrap-35 liters,ms paint container-20 ltrs scrap,plastic paint bucket-20 ltrs-scrap,old used canned pump scrap,old used mvre heater scrap,old used transformer scrap,copper scrap,old used bearing scrap various size,scrap battery,dg waste oil (scrap),waste oil(consisting of spin finish),sst powder scrap,disc pu scrap (dty),pack consumable scrap-psf,cable scrap (cut pcs various size ,mix alum&copper),empty pta jumbo bag with liner(reliance),empty pta jumbo bag with liner(others),plastic waste,plastic waste 2nd,strapping patti waste ( green),strapping patti waste ( black),damage pvc punch plate scrap,plastic bag (raffia)empty bag of lime,salt,alum etc.,pet grade sheet ( packing matl) natural,plastic sutli (scrap)y,butter paper scrap,sweeping dust,empty can(silicon spray)

corporations/Associations/Others

CTN :44972745

29 Apr, 2026 NA

Nellore - Andhra Pradesh

Tender For auction sale of scrap - 400kv current transformers,scrap - 400kv surge arrestor (hitachi make -6, cgl make-2),scrap - 198kv surge arrestors (cgl-1),scrap of 400kv capacitive voltage transformer,scrap - 66kv capacitive voltage transformer (bhel make),scrap - 4 inch aluminium pipe,scrap - porcelein disc insulators(160kn/120kn),scrap 400 kv bushings,scrap 220 kv bushings (bhel make),scrap 145 kv bushings (melco make),scrap 52 kv bushings (bhel-make),scrap transformer oil (along with drums),scrap 400kv circuit breaker,scrap firefighting ms pipe,400 kv scrap isolator mechanism box,400 kv isolator scrap aluminium,400kv scrap structure(ms),scrap bus post insulators,scrap firefighting hydrant motor-160kw,scrap firefighting diesel engine pump- 425hp,scrap firefighting jockey/spray pump- 22kw,scrap firefighting acdb -1 panel and dcdb-1 panel,scrap firefighting compressor,scrap lt system scrap acdb and dcdb panel comprising of panels,scrap oil filter machine (johnflower make),scrap aluminium cables of various sizes including insulation,scrap copper cables of various sizes including insulation,scrap 400kv composite long rod insulators(160kn/120kn),220 kv scrap isolator mechanism box,220 kv isolator scrap aluminium,220kv scrap gi structure(ms),220 kv scrap bus post insulators,scrap lighting fixtures - aluminium scrap,scrap 1-ph split ac compressors(voltas make),scrap electromagnetic relays,scrap hp neumatic tank (ms)

CTN :44952907

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/s-yd/10/04/26-27/bg/cond./8w/emu motor coach and trailer coach description- iron and steel scrap cutup parts of bg cond./8w/emu motor coaches and trailer coach with or without n.f attachment, without contents if any. 1) se 10633 emu-mc 2) se 10632 emu-mc 3) se 10635 emu-mc 4) se 10636/108636 emu-mc 5) se 10954/108954 emu- tc 6) se 10950/108950 emu-tc nb: [1] (a) 04 emu motor coaches are to be sold without : i) buffers. ii) screw coupling. iii) bearing bolt. iv) draw and buff gear. v) draw hook with collar. vi) semi permanent coupler end -a. vii)semi permanent coupler end -b. viii) draw and buffer gear. ix) centre pivit pin top bush. x) centre pivot pin bottom bush. xi) wearing piece. xii) compensating ring. xiii) wheel sets 16 nos. xiv) oil pump motor. xv) radiator motor. xvi) rectifier cooling motor. xvii) transformer. xviii) choke tank (sl, tl & dl). xix) traction motor complete with pinion. xx) suspension brass bearing. xxi) auxilary compressor. xxii) battery charger. (b) 08 nos.bogie frames(trolley) are to be sold with fittings without primary suspension against srl no.01 to 04 . nb:[2]: emu trailer coaches are to be sold without 08 nos wheel sets along with roller bearing against srl no 05 and 06 and 04 nos bogie frame with complete fittings against srl 05 and 06 and other excluded fitting list as per latest excluded fittings /coach 1271 dated 13.09.2018. nb: [3] special condition for rolling stock- a) all excluded materials including wheel sets and bogie's fittings are to be handed over by the purchaser at the nominated location for which they have to arrange labour /tools/ equipment for loading of the excluded items from cutting site and then transport to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28 trolley, coil spring, screw coupling, buffer sets etc. (ii) sse-19 wheel sets (iii) sse-30 ep unit (iv) sse-53 & 56 other emu items to be hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser has cleared all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:[4] 24 nos. wheel sets with complete fittings and with excluded fitting (released item) and 04 nos.bogie frame with complete fittings are to be handed over by the purchaser to concerned location as advised by concerned sse. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys. [custodian/stock holder - sse-emu-56 for motor coaches and sse-carraige-kgpw for tc coaches]

CTN :44934801

27 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - unserviceable/scrap ms side buffer assembly/buffer plunger and axle box casing/housingwith/without spindle and theirparts/auxiliary fittings removed from icf/lhb coaches.not fit for railway use. location: - south side of k-oil pump in area ¿g lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

CTN :44891328

30 Apr, 2026 NA

Udyogamandal - Kerala

Tender For miscellaneous works in thermal-2 - miscellaneous works in thermal-2, the work shall be carried out on a manday basis and includes collection, segregation, and shifting of metallic and non-metallic waste materials from the thermal-2 building premises. the activities cover handling of rusted metallic items, structural scrap, insulation materials, oil sludge/oil slick, mud, debris, and other miscellaneous scrap lying at various locations such as the ground floor near boiler area, pipe rack area, tg floor area, cooling tower area, and other surrounding premises. the work also includes bringing down waste materials from different floors of boiler units 1, 2, and 3 to ground level and consolidating them at a designated location. all manpower, tools, tackles, and equipment shall be provided by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be executed on a manday basis and includes loading and unloading of segregated metallic and non-metallic scrap/waste materials within the fact ud / petro plant premises as directed by the engineer-in-charge. all required manpower, tools, tackles, and handling equipment including concrete lump breakers shall be arranged by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., transportation of scrap and waste materials loaded under sl. no. 2 from cpp - pd premises to the designated scrap yard, waste dumping area, or any other location within the fact ud / petro plant premises, as directed by the engineer-in-charge. the contractor shall provide a suitable truck having carrying capacity up to 2 tonnes for the purpose.the rate per trip shall be inclusive of all charges such as vehicle hire, driver wages, fuel, and any other incidental expenses.copies of the relevant scrap dispatch advice and weighbridge report shall be submitted by the contractor for each lot of material transported. the quantity indicated is tentative and payment shall be made based on actual number of trips certified by the engineer-in-charge., the work shall be performed on a manday basis and includes moving and rearranging used materials and equipment parts such as valves, pumps, flanges, motors, radiators, drums, welding sets, structural items, roof sheets, and other related materials stacked at various locations including cpp building north and south entrance areas, boiler feed pump area, tg floor area, and other specified locations, as instructed by the engineer-in-charge. required cleaning materials, rigging materials, tools, tackles, and manpower shall be arranged by the contractor. the eot crane at the tg floor may be used free of cost, subject to availability. loading and unloading for shifting within the petro plant premises shall be in the contractor s scope. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be carried out on a manday basis and includes removal of vegetation from the outer side walls and top platforms of cooling tower cells, removal of vegetation from the side walls and floor of the cooling tower pond, and removal of accumulated mud, slurry, and other unwanted materials within the cpp cooling tower area. all manpower, tools, tackles, and equipment required for execution shall be arranged by the contractor. cleaning of all four cooling tower cells shall be treated as a single activity., the work shall be executed on a manday basis and includes thorough cleaning of the furnace oil (fo) pump house area. furnace oil spillage on floors, including areas beneath oil heaters, around pumps, condensate drains, and adjoining areas, shall be removed by spreading sawdust and collecting the oil-soaked sawdust for proper disposal as instructed by the engineer-in-charge. sawdust, cotton waste, manpower, tools, and all other materials required for complete execution of the work shall be arranged by the contractor. payment shall

CTN :44882241

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneousllaneous scrap - lot no.m.nf-37.exmp.e.04.2026-27.03 description- scrap iron frame with nf attachments (our offer) scrap star-delta starter, hscf pump, h.s pump, b.s. pump, welding machine, fire extinguisher, brake cylinder, transformer, air pressure gauge, lamp charger, stabiliser, battery charger, water cooler, oil cooler, plug, cutting parts pole shoes, ocb and other miscellaneous nf-37 items as in the lot in two places at "e" sector. may be in intact or dismantle condition. before bidding, bidders are requested to inspect the lot. loading will be done by purchaser's own arrangement.

Pump Bracket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others