Latest pup joint Tenders | Government pup joint Tenders

State Government

CTN :41730791

08 Sep, 2025 4.99 Lacs

Alwar - Rajasthan

Tender For supply of various size cid joints for hdpe pipes in division bhiwadi (ncr)

State Government

CTN :41736190

22 Sep, 2025 51.07 Lacs

Durg - Chhattisgarh

Tender For construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 12 mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber.&providing, laying, jointing, interconnection, testing and commissioning of 63 mm to 75mm dia hdpe pe-100 , pn-6 pipe & 90 mm dia pvc pipe class 6 kg/sqcm & 90 mm dia pvc pipe class 10 kg/sqcm with suitable joints & 100 mm dia gi pipe, valve specials and all fittings in cluding all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity three phase, 50 hz, 415v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but including 50mm dia gi pipe, ss/nylon wire rope and connection cable including verification of tubewell yield & electric connection from cspdcl, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr, installation of electro chlorinator, providing functional household tap connection (f.h.t.c) in individual households, providing water supply connection within schools/anganbadi/gram panchayat building/govt. or public building etc. complete with trial run for 03 months and operation & maintanance for 06 months under retrofitting piped water supply scheme under jal jeevan mission for village – khamhariya (p) block – patan, district – durg (risk & cost)

State Government

CTN :41736191

22 Sep, 2025 27.11 Lacs

Durg - Chhattisgarh

Tender For construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 12 mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber.&providing, laying, jointing, interconnection, testing and commissioning of of 63 mm to 75mm dia hdpe pe-100, pn-6 pipe 90 mm dia pvc pipe class 6 kg/sqcm & 90 mm dia pvc pipe class 10 kg/sqcm with suitable joints & 100 mm dia gi pipe, valve specials and all fittings in cluding all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity three phase, 50 hz, 415v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but including 50mm dia gi pipe, ss/nylon wire rope and connection cable & electric connection from cspdcl, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr, construction of boundary wall around over head tank size 15m.*15m.*2.40, installation of electro chlorinator, construction of chlorinator room (size 2.40*2.40*3.00m), providing functional household tap connection (f.h.t.c) in individual households complete with trial run for 03 months and operation & maintanance for 06 months under single village piped water supply scheme under jal jeevan mission for village – gatapar block – patan, district – durg (risk & cost)

State Government

CTN :41730793

10 Sep, 2025 3.50 Lacs

Bundi - Rajasthan

Tender For supply of various sizes of cid joints for hdpe pipes under jurisidictrion of phed div lakheri

CTN :41512711

08 Sep, 2025 11.30 Lacs

Thiruvananthapuram - Kerala

Tender For supply and installation of open gym equipment at panniyannur grama panchayath in thalasseri lac, kannur - retender - open gym equipment, od84136/2025-2026 : single bar - supply and installation of single bar having the following specifications: dimensions: (l x w x h) 3550 x 2590 mm. main frame - made from ø 48 mm od “b” class g.i. pipe. frame of single bar – ø 33 mm od “b” class g.i. pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. top closing cap’s - decent design size pp / hdpe / ms. material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart – made from aluminum / stainless-steel stick-on product. all joints must be robotic welded and zinc primer paint should be applied at all the welding points prior to finishing, od84137/2025-2026 : horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame – is made by ø 48 mm od “b” class gi pipe. seat frame – is made by ø 48 mm od “b” class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of ø 48 mm od “b” class g.i. pipe. angle between link and ground position is 10-20 degree. handle - ø 33 mm od “b” class gi pipe. paddle vertical support - ø 60 mm od “b” class gi pipe. handle frame- ø 42 mm od “b” class gi pipe dually bending design. foot pipe - ø 33 mm od “b” class gi pipe. support frame – 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap – pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - ø 60mm od seamless pipe. pin – made of ø 25 mm m.s. bright bar. grips - high quality rubber ø 46 mm od. circlips – a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be robotic welded and zinc primer paint should be applied at all the welding points prior to finishing, od84138/2025-2026 : arm and paddle bike - supply and installation of arm and paddle bike having the following specifications: dimensions: (l x w x h) 990 x 500 x 880 mm. main frame –100 mm x 50 mm x 2.5 mm rectangular cr pipe with bending design. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. handle – ø 33 mm od “b” class gi round pipe dully bending design. side and top cover – 1.6 mm thick ms laser cutting profile is used. seat – 380 x 275 x 60 mm thick hdpe blow moulding. paddle –100 mm x 50 mm capsule pipe and 40 x 16 mm ms flat should be used for connecting the paddle and shaft. closing cap’s – pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing bushes - ø 60 mm od seamless pipe. bearing - use is 6005 permanent lubricating sealed reputed brand. shaft -made up of ø25mm od ms bright bar. circlips– a 24 circlips ar

Central Government/Public Sector

CTN :41721549

27 Sep, 2025 NA

Multi City - Multi State

Tender For construction of 02 nos of deep borehole with jalminar in mohuldih and aaamdih village under csr : : - boring of size 6.5 inch diameter upto minimum 30m depth and further boring of size 5 inch diameter upto 50m depth in rock zone., providing and fixing of 5 inch diameter pvc casing pipe as per is 12818 with minimum wall thickness of 5.2 mm , supply and fitting of 32mm brass ball valve, supply and fitting of 32mm brass non-return valve horizontal, supply and fitting of 32mm m. s clamp to hold pipe, supply and fitting of g. i nipple 32mm, supply and fitting of g. i bend 32 mm, supply and fitting of bore well cover size 5 inch, supply and fitting of p.p.rope rassi of size 10mm dia, pvc tape 02 roll taplon tap 10 roll mseal 20 pkt etc all complete., supply and fitting of size 1 inch dia , supply and fitting of size 3 by 4 inch dia, supply and fitting of size half inch dia, supply and fitting of valve size 1 inch dia, supply and fitting of valve size half inch dia, "providing and laying single layer brick flat soling with over burnt or picked jhama bricks including preparing and leveling the bed and filling the joints with locally available coarse sand.", "making platform with side brick wall for fixing water point one side 900 mm height and other three side 200mm with anti skid vetrified floor tiles size 300 x 300 and ceramic wall tiles 300 x 150 mm upto a height of 900 mm over brick wall all complete as directed by eic", "providing and applying with synthetic enamel paint two or more coats with approved brand and shade ready mixed paint including primer as per direction of eic with the latest monogramme of ucil.", "providing of submersible pump set of 02 hp minimum wp 1500 and minimum 110 m water head auto run & stop with dc pump motor of stainless steel suitable for minimum 125 mm dia borewell discharge rate minimum 2000 lph at minimum 110 mtrs head and making suitable arrangements to operate hand pump manually in the same borewell when there is no solar power including 02 years warranty against defects in materials & workmanship with locking arrangements of switch board all complete as per of eic. ", "providing and fixing of 2.5 sqmm x 3 core flat submersible copper cable as per latest is 694 as directed by eic", "providing fixing and lowering of 32 mm dia upvc sch80 pipe of pressure rating of 12.50 kg per cm2 with all accesssories and fittings complete as per direction of eic", "providing and fixing ptmt push cock or bib cock of approved quality and colour 15 mm nominal bore 98 mm long weighing not less than 75 gms", "supply and installation of hot dip galvanized steel composite stagging structure of height 4.5 m and 1.5 m x 1.5 m size aprox 350 kg for mounting of 2000 l water tank to withstand wind pressure of high wind of 200 km per hr as per direction of engineer incharge.", "providing and fixing of hdpe water tank isi mark 2000 ltr capacity with cover and locking arrangement to be put on the top of the steel stagging.", "installation fittings plumbing charge civil work of jalminar with pump set complete including transportation as per direction of eic.as per direction of engineer incharge"

Central Government/Public Sector

CTN :41687065

24 Sep, 2025 NA

East Godavari - Andhra Pradesh

Tender For supply of pup joint 2-7/8" 6.4 ppf 3-1/2" x 2-7/8* , 7/8 drillable tubing

Central Government/Public Sector

CTN :41605725

06 Sep, 2025 3.21 Lacs

Bhadrawati - Maharashtra

Tender For providing and fixing of open / green gym item in palasgaon village under kuchana housing complex of majri area. - earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil., supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:1 :3 (1 cement:1 coarse sand (zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources), providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of m - 30 grade made of c&d waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge., providing and fixing pommel horse size 2200 x 710 x 610 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing sky walker size 1700 x 710 x 1700 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and foot rest structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing single shoulder press size 1200 x 760 x 1670 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing seating standing twister size 1820 x 610 x 1520 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and twister plate structure made of m.s sheet / frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing outdoor traidmill size 1200 x 610 x 1220 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. plate. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bea

Central Government/Public Sector

CTN :40447723

05 Sep, 2025 NA

Delhi - Delhi

Tender For bid to ras supply of migration of afro lan onto afnet - input output box , cat 6 a cable utp , cable manage panel , utp patch cord 3m , utp patch cord 1m , fiber junction box tjb box 24 core , fiber junction box tjb box 48 core , liu 24 port fdf , liu 48 port fdf , optical fibre cable , pvc conduit pipe 40 mm , pvc conduit pipe 25 mm , casing and capping 25 mm baten , gi flexible pipe 25 mm , gi flexible pipe 40 mm , hdpe pipe , pvc bands,elbow and t joints 40mm , pvc bands,elbow and t joints 25mm , nylon self locking cable ties , tagging stickes 2.5 inches x3 inches , rj 45 cat 6 a connector , btteries stand , jack panel 24 port cat 6 a , open rack , 5 kva ups , battery , patch cord optical 7 feet , patch cord optical 3 feet , rack 15 u wall mounting fixing , fixing and installation of cisco switch in rack , fixing of input output box , laying of cat 6 a utp cable , jack panel 24 port cat 6 a loaded with dust cover input output fixing , cable manager 1u fixing , fixing of fiber junction box 24 core , fixing of fiber junction box tjb box 48 core , fixing of liu 24 port fdf fully loaded sm lc type , fixing of liu 48 port fdf fully loaded sm lc type , laying of ofc 24 core , digging and laying of ofc 24 core

State Government

CTN :41590599

09 Sep, 2025 64.17 Lacs

Durg - Chhattisgarh

Tender For construction, testing and commissioning of elevated service reservoirs of rcc staging and zinc aluminium alloy tank in village malpurikala (capacity 20 kl & staging 12 m) including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber. & providing, laying, jointing, interconnection, testing and commissioning of 63 mm to 75mm dia hdpe pe-100 , pn-6 pipe & 110 mm dia pvc pipe class 6 kg/sqcm & 90 mm dia pvc pipe class 10 kg/sqcm with suitable joints & 100 mm dia gi pipe, valve specials and all fittings in cluding all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity three phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but including 50mm dia gi pipe, ss/nylon wire rope and connection cable including verification of tubewell yield & electric connection from cspdcl, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr, construction of boundary wall around the over head tank, installation of electro chlorinator, construction of chlorinator room of size 2.4*2.4*3.0 mtr, providing functional household tap connection (f.h.t.c) in individual households, providing water supply connection within schools/anganbadi/gram panchayat building/govt. or public building etc. complete with trial run for 03 months and operation & maintanance for 06 months under retrofitting piped water supply scheme under jal jeevan mission for village – malpurikala block – dhamdha, district – durg.( risk & cost)

Pup Joint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors