Latest rails Tenders | Government rails Tenders

Central Government/Public Sector

CTN :40698786

07 Jul, 2025 NA

Multi City - Multi State

Tender For various base depot/site activities in c/w through sleeper renewal by pqrs 12.75 km at various locations of dn line km 14.00 to 19.50 & 20.25 to 27.75 km of existing track laid with 60 kg rails on psc-6 sleepers with m+7 density proposed with psc wider sleeper with m+8 density on jrc-ptk section under sr.den-i/fzr

Central Government/Public Sector

CTN :40448682

18 Jun, 2025 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : tender for supply of wind screen glass rh , wiper blades , injector nozzle , s/a of hose tank pump , cable assy clutch , slider/cardan universal joint , harness assy wiring no.2st , rear hub oil inner seal , thermostat , brake shoe assy rear , cylinder assy rear wheel rh , tie rod end steering , net front grill , anabond al 673 350 gms , pto idler shaft , speedo flex cable , pin shackle , cushion assy lh fornt hard top , housing starter , regulator assy , rear hub bearing , absorber assy front shock , protector bumper corner rh , bulb (12v 5w) , tank water reserve , lock assy gate side lh , lever assy , bumper spring , u bolt front spring lh , clutch release bush remover , pipe brake no 2

Central Government/Public Sector

CTN :40698904

14 Jul, 2025 NA

Bangalore - Karnataka

Tender For bengaluru - sampige road sec : supply of ballast at nittur (ntr) depot (quantity = 80,175 cum), including leading and loading in connection with the work of (a) complete track renewal (p) of existing 52kg rails on 60kg psc of 1540 nos/km with 60kg/90 uts rails and 60 kg wider base sleeper of 1660/km for a length of 17.15 km from 17/650-10/500 and 39/000-49/000 dn line in aden/ypr section, (b) complete track renewal (p) of existing 52kg rails on 60kg psc of 1540 nos/km with 60kg/90 uts rails and 60kg wider base sleeper of 1660/km for a length of 21.35km from 17/650 - 39/000 up line in aden/ypr section, (c) complete track renewal (p) of existing 52kg rails on 60kg psc of 1540 nos/km with 60kg/90 uts rails and 60kg wider base sleeper of 1660/km for a length of 19.4 tkm from km 49/000-68/400 dn line in aden/ypr section.

Central Government/Public Sector

CTN :40698907

14 Jul, 2025 NA

Bangalore - Karnataka

Tender For sw i : bengaluru - dharmavaram section : complete track renewal (p) of existing 60kg psc of 1660 nos/km with 60kg/90 uts r-260 rails and 60kg wider base sleeper of 1660/km for a length of 5.5 tkm from km 130/000-135/500 (dn) in sse/pway/penukonda section. sw ii : bengaluru - dharmavarm section : through fittings renewal - 42.3 kms from km 101/200-130/000 and 135/500-136/700 (dn line) and km 136/700-149/000 (sl) in sse/pway/pkd section. sw iii : bengaluru - dharmavaram section : earthwork in connection with the work of complete track renewal (p) of existing 60kg rails on 60kg psc of 1660 nos/km with 60kg/90 uts r-260 rails and 60kg wider base sleeper of 1660/km for a length of 5.5 tkm from 130/000-135/500 (dn) in sse/pway/penukonda section. maintenance period for sw-iii is 6 months or one monsoon period whichever is later. (composite work)

Central Government/Public Sector

CTN :40701070

23 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of welding portion for fusion welding of rails by alumino thermic process for 52kg (90 uts) r ails with 25 mm gap using cap/oxy lpg/oxy propane preheating with 3 piece mould (zr-washed) manua lly pressed/core shooted with auto tapping thimble & ssc as per rdso specification irs t/19-2021 rev. 7.0 (with list of consumables/equipments etc. as per annexure-a). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40698817

04 Jul, 2025 NA

Ukai - Gujarat

Tender For ukai songhad-jalgaon section- execution of welding of 60kg/60ei-r260 rails and 60kg 90uts in-situ with single shot crucible fitted and supply of welding portion 60kg/60ei-r260 and 60kg 90uts in connection with sanction track works under sr. den-east jurisdiction.

Central Government/Public Sector

CTN :40461021

19 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : manufacture and supply of galvanized metal liner to rdso drg. no. rt- 8748 for 60 kg (uic)/ 60 e1 rails with latest alterations-7 for use with wider psc sleeper to rdso drg no. t-8746 confirming to ir s specification for metal liners for use with elastic rail clips sr. no. t-56- 2025 (the alt in drawing and speci fication issued by rdso up to one month prior to tender closing date shall be applicable in this tender). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40692767

27 Jun, 2025 NA

Mandal - Gujarat

Tender For supply of warman pump spares > - model: 1.5/1 bah, metal/ rubber /expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, gland ( 2 piece), lantern ring, volute frame seal, frame plate, volute liner, discharge joint ring, impeller o ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), frame plate liner insert, impeller, cover plate bolt& nut (1 set consists of 4 nos), cover plate, intake joint ring, gland clamp bolt (1 set consists of 2nos), gland bolt, nut & washer (1 set consists of 2nos), gland packing (1 set consists of 2 nos), neck ring, expeller, expeller ring, seal ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), end cover set screw (1 set consists of 8 nos), shim set, piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner, frame plate stud & nut, frame plate liner, cover plate bolt& nut, model: 3/2 cah, metal/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve, frame plate liner insert stud (1 set consists of 4 nos), seal ring, volute frame seal, impeller, discharge joint ring, volute liner, cover plate, intake joint ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), frame plate liner insert, frame plate, impeller o ring, grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, expeller, expeller ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner stud (1 set consists of 4 nos), cover plate liner (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), frame plate liner, model: 4/3 dah, rubber/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, frame plate liner stud (1 set consists of 4 nos), frame plate liner, frame plate, impeller (normal), cover plate liner, cover plate, cover plate liner stud (1 set consists of 4 nos), adjusting screw, nut & washer (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), impeller o ring, cover plate bolt& nut (1 set consists of 4 nos), shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, gland clamp bolt (1 set consists of 2 nos), frame plate liner insert, seal ring, impeller (trimmed), volute liner, volute frame seal, frame plate liner insert stud (1 set consists of 4 nos), discharge joint ring, keeper plate, intake joint ring, expeller, expeller ring, model: 6/4 eah, metal/ gland seal, bearing assembly, clamp washer, clamp bolt-1 nut, shaft sleeve o ring, shaft sleeve, frame plate liner insert stud -1 thin self lock nut, seal ring, volute liner seal, impeller, frame plate, discharge joint ring, volute liner, throat bush, cover plate, cotter, intake joint ring, adjusting screw -3 thin nuts -2 washers, base, frame plate liner insert, impeller o ring, cover plate bolt -2 nuts, packing, gland ( 2 piece), gland bolt -1 nut -1 wa

corporations/Associations/Others

CTN :40224241

19 Jun, 2025 41.00 Lacs

Vellore - Tamil Nadu

Tender For corrigendum : providing cover slab to existing valve pits, providing hand rails to the oht steps and maintenance to the protection wall to valallar nagar oht campus in ward no . 51 at zone - iii vellore corporation.

Central Government / Public Sector

CTN :40702262

08 Jul, 2025 NA

Sambalpur - Odisha

Tender For supply of alumino thermic welding portion for 60kg 90 uts rails at various location under the jurisdiction of den/central of sambalpur division.

Rails Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors